Alape
Architecture is lived individuality and every person is unique in their personality. The design, aesthetics and material language of Alape products are perfectly suited to meet this desire for individuality. Alape has stood for quality solutions in the sanitary sector for over 100 years.
Prod. no.:
6003103336
Alape Arkta furniture handle round 26mm
- Furniture handle- round, Ø 26mm, height 18 mm- including fixing screw M4- suitable for Arkta furniture modules- One handle per drawer- For module width 1200 mm with continuous drawer two handles are necessary.- Furniture front pre-drilled at the factory for easy handle installation- Brushed brass
Prod. no.:
8302000978
Alape VT.1 Stem valve
- Shaft valve 1 1/4"- Surface: chrome- diameter hood 63 mm- with accumulation function- When using the VT.1, an overflow in the basin or washbasin is mandatory!
Prod. no.:
3509000000
Alape AB.SO400.1 Countertop sink
- round- Ø 400 mm- height 102 mm- glazed steel- white- ProShield- without tap hole- without overflow- mounting set included- stem valve- valve cap, chrome-plated- spacer ring white
Prod. no.:
5075800000
Alape WP.XS2 Washbasin Xplore.S, basin right with tap hole, without overflow
- rectangular- Surface: White, ProShield (On the already non-porous and thus particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- Dimensions: 645 x 268 mm- height 300 mm- Rectangular basin, right- glazed inside and outside (glaze has the same acid resistance as glass, so only hydrofluoric acid could damage the surface. In addition, the glaze can withstand temperature differences from -60 to +450 degrees Celcius. Thanks to the glaze, the washbasins are also resistant to impact, scratches and abrasion, and are considered colorfast and light-resistant without discoloration)- shelf and towel holder on the left- with tap hole, without overflow- including stem valve with white glazed cover cap- including mounting set- Fitting note: Optimal impact range approx. 125 - 135 mm from the center of the tap hole
Prod. no.:
2000000000
Alape EB.K325 Built-in basin, 325mm, without overflow, without tap hole
- circular- Surface: White, ProShield (On the already pore-free and thus particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- diameter 325 mm- glazed inside and outside (glaze has the same acid resistance as glass, so only hydrofluoric acid could damage the surface. In addition, the glaze can withstand temperature differences from -60 to +450 degrees Celcius. Thanks to the glaze, the washbasins are also resistant to impact, scratches and abrasion, and are considered to be colorfast and light-resistant without discoloration)- for installation from above and below- cut-out dimension above 290 mm- cut-out size below 265 mm- without tap hole- without overflow- including mounting set
Variants from €129.49*
Prod. no.:
3226701000
Alape UB.ME500 Metaphor undermount basin 504x379mm, without tap hole, with overflow
- rectangular- Surface: White, ProShield (bacteria and fungi hardly stand a chance on the already non-porous and therefore particularly hygienic surface of the glazed steel thanks to "ProShield")- Material: glazed steel- Tray 504 x 379mm- Depth 100mm- Glazed inside and out (glaze has the same acid resistance as glass, so only hydrofluoric acid could damage the surface. In addition, the glaze can withstand temperature differences from -60 to +450 degrees Celcius. Thanks to the glaze, the washbasins are also impact-, scratch- and abrasion-resistant and are considered color-fast and light-resistant without discoloration)- for installation from below- with overflow, without tap hole- including overflow set- Fitting note: optimum impact area approx. 90 - 135 mm from the rear edge of the basin
Variants from €565.75*
Prod. no.:
3302000000
Alape AB.Q450.1 Countertop basin, 450 x 450mm without tap hole, without overflow
- square- Surface: White, ProShield (On the already pore-free and thus particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- Dimensions: 450 x 450 mm- height 110 mm- glazed- without tap hole and without overflow- including stem valve with white glazed cap- including mounting set- Fitting note: optimum impact range approx. 115 - 175mm from center of tap hole
Prod. no.:
9510009000
Alape Valve cap, Ø63mm, White
- white glazed- suitable for basins without overflow with Alape stem valve 11/4``
Prod. no.:
8902000980
Alape UNTENSILO tray
- suitable for Alape sink AG.STAHLFORM510Ü- powder coated, matt black
Prod. no.:
8304000000
Alape VT.2 stem valve for basin without overflow, valve cap 63mm
- for basins without overflow- with valve cap Ø 63mm- white glazed
Variants from €40.15*
Prod. no.:
8270000331
Alape Assist AS.400.S Shelf 400mm
- Shelf- powder coated- matt white- width 400mm- without cutouts- incl. fixing set for wall mounting- without wall dowels- height front edge 25mm- total height 50mm- depth 100mm
Variants from €130.65*
Prod. no.:
2005000000
Alape EW 3 built-in basin without overflow
- circular- Surface: White, ProShield (On the already pore-free and thus particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- diameter 450 mm- glazed inside and outside (glaze has the same acid resistance as glass, so only hydrofluoric acid could damage the surface. In addition, the glaze can withstand temperature differences from -60 to +450 degrees Celcius. Thanks to the glaze, the washbasins are also resistant to impact, scratches and abrasion, and are considered colorfast and light-resistant without discoloration)- for installation from above- cutout dimension 415 mm- with tap hole- without overflow- including mounting set- Fitting note: optimum impact area approx. 140 - 160mm from the rear edge of the basin
Prod. no.:
8274170981
Alape Assist AS.160.TPH toilet paper holder
- Toilet paper holder- rectangular- W/H/D 160/50/100 mm- aluminum, matt black, anodized and powder coated- one cutout- including mounting set without dowels (to be adapted to the structural conditions)
Prod. no.:
5260000000
Alape Steel19 WP.S19.1 Washing place
- Washing place, wall hung, rectangular- W/H/D 600/500/360mm- bowl left, Ø 275 mm, bowl depth 90 mm- glazed steel, white, without overflow- console: steel, powder-coated, matt black, including mounting set- including stem valve, valve cap, glazed in basin color, siphon cover matt black, glass shelf, wall outlet fitting in splashback
Prod. no.:
1205000180
Alape AG.steel mold 510Ü sink
- 510 x 360mm- glazed inside and outside (glaze has the same acid resistance as glass, so only hydrofluoric acid could damage the surface. In addition, the glaze can withstand temperature differences from -60 to +450 degrees Celcius. Thanks to the glaze, the washbasins are also resistant to impact, scratches and abrasion, and are considered colorfast and light-resistant without discoloration)- BiColor- without tap hole, with overflow- black plastic rim- including mounting set- drain and overflow set with chain and plug
Prod. no.:
2018000000
Alape EW 3.2 Built-in basin, 475mm with tap hole, with overflow
- circular- Surface: White, ProShield (On the already pore-free and thus particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- diameter 475 mm- glazed inside and outside (glaze has the same acid resistance as glass, so only hydrofluoric acid could damage the surface. In addition, the glaze can withstand temperature differences from -60 to +450 degrees Celcius. Thanks to the glaze, the washbasins are also resistant to impact, scratches and abrasion, and are considered colorfast and light-resistant without discoloration)- for installation from above- cut-out dimension 440 mm- with tap hole and overflow- including mounting set and overflow set- Fitting note: Optimal impact range approx. 105 - 175mm from the center of the tap hole
Prod. no.:
3208000000
Alape AB.RE700.4 Countertop basin x.plicit 700 x 398mm, without tap hole, without overflow
- rectangular- Surface: White, ProShield (On the already non-porous and thus particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- Dimensions: 700 x 398 mm- Height 75 mm- trough depth 65 mm- glazed- without tap hole and without overflow- including stem valve with white glazed cover cap- inclusive mounting set- Fitting note: optimum impact area approx. 105 - 140mm from rear edge of basin
Variants from €468.60*
Prod. no.:
2100000000
Alape EB.O425 Built-in basin, 425 x 325mm, without tap hole, with overflow
- oval- Surface: White, ProShield (On the already pore-free and therefore particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- Dimensions: 425 x 325 mm- glazed inside and outside (glaze has the same acid resistance as glass, so only hydrofluoric acid could damage the surface. In addition, the glaze can withstand temperature differences from -60 to +450 degrees Celcius. Thanks to the glaze, the washbasins are also resistant to impact, scratches and abrasion, and are considered colorfast and light-resistant without discoloration)- for installation from above and below according to the template- without tap hole- with overflow- including fixing set and overflow fitting- Fitting note: optimum impact area approx. 100 - 125mm from the center of the tap hole
Prod. no.:
8312000331
Alape SI.3 Water trap
- Trap 1 1/4 "- Surface: White, ProShield (On the already pore-free and thus particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- with wall rosette- Immersion tube height adjustable from 75 to 330 mm
Variants from €112.63*
Prod. no.:
8271140331
Alape Assist AS.600.HT Towel rail 600mm
- Shelf- Aluminum powder coated- matt white- width 600mm- with cutout for towel in the middle- cutout size 530mm- including mounting set for wall mounting, without dowels
Variants from €173.30*
Prod. no.:
2102000000
Alape EB.O500H Built-in basin, 500 x 400mm, with tap hole, with overflow
- oval- Surface: White, ProShield (On the already pore-free and therefore particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- dimensions: 500 x 400 mm- glazed inside and outside (glaze has the same acid resistance as glass, so only hydrofluoric acid could damage the surface. In addition, the glaze can withstand temperature differences from -60 to +450 degrees Celcius. Thanks to the glaze, the washbasins are also resistant to impact, scratches and abrasion, and are considered colorfast and light-resistant without discoloration)- for installation from the top according to the template- with tap hole and overflow- including fixing set and overflow fitting- Fitting note: optimal impact area approx. 120 - 140mm from the middle of the tap hole
Prod. no.:
2201000000
Alape EB.R585 Built-in basin, 585 x 347mm, without tap hole, with overflow
- rectangular- Surface: White, ProShield (On the already pore-free and thus particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- Dimensions: 585 x 347 mm- glazed inside and outside (glaze has the same acid resistance as glass, so only hydrofluoric acid could damage the surface. In addition, the glaze can withstand temperature differences from -60 to +450 degrees Celcius. Thanks to the glaze, the washbasins are also resistant to impact, scratches and abrasion, and are considered to be colorfast and light-resistant without discoloration)- for installation from above and below- cut-out size above 550 x 312 mm- cut-out size below 490 x 250 mm- without tap hole- with overflow- including mounting set and overflow fitting- Fitting note: optimal impact area approx. 160 - 180mm from the rear edge of the basin
Variants from €259.50*
Prod. no.:
5041000000
Alape WT.RS325 washbasin 50410000 diameter 329mm, without tap hole, without overflow
- circular- Surface: White, ProShield (On the already pore-free and thus particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- diameter 325 mm- height 290 mm- glazed inside and outside (glaze has the same acid resistance as glass, so only hydrofluoric acid could damage the surface. In addition, the glaze can withstand temperature differences from -60 to +450 degrees Celcius. Thanks to the glaze, the washbasins are also resistant to impact, scratches and abrasion, and are considered colorfast and light-resistant without discoloration)- without tap hole and without overflow- including mounting set- including wall bracket white
Variants from €532.25*
Prod. no.:
3503000000
Alape AB.SO450.1 Countertop basin 450mm, without tap hole, without overflow
- circular- Surface: White, ProShield (On the already pore-free and thus particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- diameter 450 mm- height 115 mm (including base ring)- glazed inside and outside (glaze has the same acid resistance as glass, so only hydrofluoric acid could damage the surface. In addition, the glaze can withstand temperature differences from -60 to +450 degrees Celcius. Thanks to the glaze, the washbasins are also resistant to impact, scratches and abrasion, and are considered colorfast and light-resistant without discoloration)- without tap hole and without overflow- including shaft valve with chrome-plated cover cap and base ring white- Fitting note: optimal impact area approx. 60 - 170mm mm from the rear edge of the basin
Prod. no.:
2900000000
Alape HB.S450H Semi-recessed basin 450mm, with tap hole, with overflow
- circular- Surface: White, ProShield (On the already pore-free and thus particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- diameter 450 mm- glazed inside and outside (glaze has the same acid resistance as glass, so only hydrofluoric acid could damage the surface. In addition, the glaze can withstand temperature differences from -60 to +450 degrees Celcius. Thanks to the glaze, the washbasins are also resistant to impact, scratches and abrasion, and are considered to be colorfast and light-resistant without discoloration)- for installation in carrier plates- cut-out size according to the template- optimal slab thickness 40 mm- with tap hole and overflow- including fixing set and overflow fitting- Fitting note: optimum impact range approx. 100 - 170mm from center of tap hole
Prod. no.:
5241000000
Alape WP.Insert1 Washplace Insert.storage shelf white, with tap hole, basin left
- rectangular with bowl- Surface: White, ProShield (On the already pore-free and therefore particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- Dimensions: 485 x 317 mm- height 470 mm- bowl basin 300 mm left- with tap hole, without overflow- substructure white powder coated- shelf white glazed steel- shelf and towel holder on the right- including stem valve with chrome-plated cover flap- including bottle siphon- including mounting set- Fitting note: Optimal impact area approx. 76 - 116 mm from center of tap hole
Variants from €508.60*
Prod. no.:
9510006000
Alape Valve cap, D65mm plastic, chrome-plated
- Replacement valve cap
Prod. no.:
9510106118
Alape Enamel repair lacquer, white White, tube 8 ml
- Lacquer repair- Tube 8ml
Prod. no.:
2302000000
Alape EB.Q450 Built-in basin 450 x 450mm, without tap hole, without overflow
- square- Surface: White, ProShield (On the already non-porous and thus particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- dimensions: 450 x 450 mm- glazed inside and outside (glaze has the same acid resistance as glass, so only hydrofluoric acid could damage the surface. In addition, the glaze can withstand temperature differences from -60 to +450 degrees Celcius. Thanks to the glaze, the washbasins are also resistant to impact, scratches and abrasion, and are considered to be colorfast and light-resistant without discoloration)- for installation from above and below- cut-out size top 415 x 415 mm- cut-out size below 350 x 350 mm- without tap hole and without overflow- including stem valve with white glazed cover cap- including mounting set- Fitting note: optimum impact area approx. 115 - 170mm from the rear edge of the basin
Prod. no.:
3221000000
Alape AB.KE375 Countertop basin UNISONO 375mm, without tap hole, without overflow
- circular- Surface: White, ProShield (On the already pore-free and thus particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- Diameter 375 mm- height 114 mm- glazed- without tap hole and without overflow- including stem valve with chrome-plated cover cap- inclusive mounting set- inclusive distance frame in black- Fitting note: optimum impact area approx. 85 - 120mm from rear edge of basin
Variants from €332.65*
Prod. no.:
9500410000
Alape Overflow set -C-
- for basins and washbasins without overflow- designed for stem and universal valve, white
Prod. no.:
8306000978
Alape SI.2 Odor trap
- Water trap 1 1/4 "- Surface: chrome- with wall rosette-immersion pipe height adjustable from 135 to 205 mm
Prod. no.:
2031700000
Alape UB.K400 undermount basin 359mm, without tap hole, with overflow
- circular- Surface: White, ProShield (On the already pore-free and thus particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- diameter of the bowl 359 mm- glazed inside and outside (glaze has the same acid resistance as glass, so only hydrofluoric acid could damage the surface. In addition, the glaze can withstand temperature differences from -60 to +450 degrees Celcius. Thanks to the glaze, the washbasins are also resistant to impact, scratches and abrasion, and are considered colorfast and light-resistant without discoloration)- for installation from below- with overflow- without tap hole- including drain set- Fittings note: optimal impact area approx 110-150mm from the rear edge of the basin
Prod. no.:
8270000981
Alape Assist AS.400.S shower tray
- Shower tray, rectangular- W/H/D 400/50/100 mm- aluminum, matt black, anodized and powder coated- without cutouts- including mounting set, without dowels (to be adapted to the structural conditions)
Prod. no.:
6720000899
Alape SP.300C Mirror without light
- Corner mirror on aluminum frame- height 800 mm- width 324 mm- depth 67 mm- side profiles white powder coated- unlit- mounting set included
Variants from €169.24*
Prod. no.:
3501000180
Alape SB.K360.GS Bowl basin, 360mm, without tap hole, without overflow
- circular circular- diameter 360 mm- Height incl. spacer ring- 130 mm- inside white glazed, outside matt black- without tap hole and overflow- including stem valve with white glazed cover cap andspacer ring black
Variants from €221.40*
Prod. no.:
3507500000
Alape SB.SR650 Stream bowl basin 599 x 349mm, without tap hole, without overflow
- rectangular- Surface: White, ProShield (On the already pore-free and thus particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- Dimensions: 600 x 350mm- Height incl. base ring 118 mm- glazed inside and outside (glaze has the same acid resistance as glass, so only hydrofluoric acid could damage the surface. In addition, the glaze can withstand temperature differences from -60 to +450 degrees Celcius. Thanks to the glaze, the washbasins are also resistant to impact, scratches and abrasion, and are considered colorfast and light-resistant without discoloration)- without tap hole and without overflow- including stem valve with chrome-plated cover cap- including base ring chrome-plated- Fitting note: Optimal impact area approx. 58 - 108 mm from rear edge of basin
Prod. no.:
3900000091
Alape SB.Aqua300 bowl basin diameter 300mm
- round- Ø 300 mm- height 118 mm- glazed steel- deep green- without tap hole, without overflow- including stem valve, valve cap, glazed in basin color- optimal impact area of the water approx. 80-110mm from the rear edge of the basin
Variants from €345.93*
Prod. no.:
3901000081
Alape SB.Terra360 bowl basin diameter 360mm
- round- Ø 360 mm- height 137 mm- glazed steel- oyster matt- without tap hole, without overflow- including stem valve, valve cap, glazed in basin color- optimal impact area of the water approx. 100-140mm from the rear edge of the basin
Variants from €333.15*
Prod. no.:
4271000000
Alape WT.QS325X Washbasin, 325 x 325mm, without tap hole, without overflow
- square- Surface: White, ProShield (On the already pore-free and therefore particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- Dimensions: 325 x 325 mm- height 300 mm- basin bowl square in the middle- glazed inside and outside (glaze has the same acid resistance as glass, so only hydrofluoric acid could damage the surface. In addition, the glaze can withstand temperature differences from -60 to +450 degrees Celcius. Thanks to the glaze, the washbasins are also resistant to impact, scratches and abrasion, and are considered colorfast and light-resistant without discoloration)- without tap hole and without overflow- including shaft valve with white glazed cover plate- including mounting set- Fitting note: Optimal impact area approx. 110-130 mm from rear edge of basin
Variants from €378.55*
Prod. no.:
6003205980
Alape Arkta furniture handle rectangular 450mm
- Furniture handle- rectangular, (W / H / D ) 450 / 14 / 44 mm- surface matt black, powder coated- including fixing screws M4, suitable for Arkta furniture modules- Suitable for furniture module 800 mm as well as 1200, 1400 and 1600 mm with two drawers- One handle per drawer.- Furniture front pre-drilled at the factory for easy handle installation
Prod. no.:
8305000000
Alape VT.3 stem valve for basin without overflow, valve cap 74mm
- for basins without overflow- with valve cap Ø 74mm- white glazed
Variants from €43.20*
Prod. no.:
2207000000
Alape EB.RE700.4 Built-in basin X.plicit 700 x 398mm without tap hole, without overflow
- rectangular- Surface: White, ProShield (On the already pore-free and thus particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- Dimensions: 700 x 398 mm- trough depth 65 mm- glazed inside and outside (glaze has the same acid resistance as glass, so only hydrofluoric acid could damage the surface. In addition, the glaze can withstand temperature differences from -60 to +450 degrees Celcius. Thanks to the glaze, the washbasins are also resistant to impact, scratches and abrasion, and are considered to be colorfast and light-resistant without discoloration)- for installation from above and below- cut-out size above 665 x 363 mm- cut-out size below according to template- without tap hole- without overflow- including stem valve with white glazed cover cap- inclusive mounting set- Fitting note: optimum impact area approx. 105 - 140mm from rear edge of basin
Prod. no.:
4290000000
Alape WT.XS500H.L Washbasin Xplore.S, 500 x 268mm, with tap hole, without overflow
- rectangular- Surface: White, ProShield (On the already pore-free and thus particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- Dimensions: 500 x 268 mm- height 100 mm- Rectangular basin on the left- glazed inside and outside (glaze has the same acid resistance as glass, so only hydrofluoric acid could damage the surface. In addition, the glaze can withstand temperature differences from -60 to +450 degrees Celcius. Thanks to the glaze, the washbasins are also resistant to impact, scratches and abrasion, and are considered colorfast and light-resistant without discoloration)- with tap hole, without overflow- including stem valve with white glazed cap- including mounting set- Fitting note: Optimal impact range approx. 125 - 135mm from the center of the tap hole
Variants from €318.61*
Prod. no.:
8274112981
Alape Assist AS.225.LO3 Shower tray
- Shower tray, rectangular- W/H/D 257/196/101 mm- aluminum, matt black, anodized and powder coated- three cutouts- mounting set included- three plastic bottles- without dowels (to be adapted to the structural conditions)
Variants from €114.85*
Prod. no.:
3521500081
Alape SB.SR650 Stream bowl pool
- rectangular- W/H/D 600/118/350 mm- glazed steel- oyster matt- without tap hole- without overflow- stem valve- valve cap- glazed in basin color- distance frame black
Prod. no.:
2110700000
Alape UB.O425 Oval undermount basin 372 x 273mm without tap hole, with overflow
- oval- Surface: White, ProShield (On the already pore-free and therefore particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- Dimensions of the tray 379 x 281 mm- depth 106mm- glazed inside and outside (glaze has the same acid resistance as glass, so only hydrofluoric acid could damage the surface. In addition, the glaze can withstand temperature differences from -60 to +450 degrees Celcius. Thanks to the glaze, the washbasins are also resistant to impact, scratches and abrasion, and are considered colorfast and light-resistant without discoloration)- for installation from below- with overflow- without tap hole- including overflow set- Fittings note: optimal impact range approx 87-125mm from the rear edge of the basin
Prod. no.:
6003001000
Alape Arkta Tip-On with Softclose
- Pull-out system- for Arkta furniture modules- Tip-On and Softclose in one- 2 pieces- quantity sufficient for one drawer- pre-assembled at the factory
Alape washbasins, bathroom furniture & mirrors
Architecture is lived individuality. It directly reflects the personality of the individual. For Alape, the bathroom is an architectural space that corresponds entirely to one's own ideas and requirements. The Alape component system supports the planning and implementation of individual bathroom architecture through a clear interplay of basic and individual components. The purist design language of the Alape washbasins, Alape built-in and countertop basins, illuminated mirrors and bathroom furniture is just as characteristic of Alape as the high quality and precise workmanship of the materials.
Alape washbasins
Alape washbasins run under the program A˘form, are made of glazed steel and have a particularly high design appeal. The surfaces of Alape products are extremely durable, easy to clean and long-lasting. Alape developed the world's first built-in basin, the EW3, in the 1970s and, from our perspective, remains the market leader in the manufacture of washbasins. The delicate aesthetics and diversity of Alape washbasins remains unique and is an essential building block of bathroom architecture for many design lovers.
Alape utility basins
Not only the Alape washbasins are popular with customers. The interior and exterior glazed utility basins also impress with their functionality and robust design. Made with a dark blue plastic rim, soft edges ensure that even heavy materials can be supported here. Alape utility basins have no tap hole and no overflow, but they come with a drain valve, chain and stopper.
Alape drop-in washbasins in round in rund, square or oval
The drop-in basins from Alape are available in round, square and oval shapes. Whether with or without a tap hole or overflow: The basins integrate ideally into any bathroom design.
Alape shallow recessed basin
The Alape shallow recessed basins ensure a flush transition between the basin and the washbasin surface. The coordinated Alape design blends in perfectly with the look of your bathroom.
Alape semi-recessed washbasins
Semi-recessed, semi-projecting: this is what distinguishes the Alape semi-recessed basins. They stand out in the bathroom and at the same time offer plenty of storage space. Both the angular and the round variant are inspiring.
Undermount washbasin
Since 2015 on the market, the Alape undermount washbasins convince with their inconspicuous, yet stylish look. In various designs and angular or round shape, the undermount washbasins fit into the bathroom.
Alape washbowls
Oval or round, the washbowls from Alape with their graceful look are an eye-catcher in any bathroom. A special model are the bicolour bowls On the one hand, they stand out due to the colour combination of black and white, and on the other hand, due to the interplay of matte and shiny tones.
Alape countertop washbasins
In round or angular form, the washbasins rise above the washstand. In white, the Alape countertop washbasin is available in eight variants.
Alape Steel 19
Behind Alape Steel 19 is a complete wash place solution including a wall-mounted spout. Industrial charm characterizes the puristic washbasin Alape Steel 19. A glass shelf, the graceful steel frame and the white enameled basin make the washbasin solution an eye-catcher.
Column washbasin
The column washbasin by Alape is a circular or angular washbasin with a height of 90 cm. With a wall connection, it convinces in the colour combination black, white or in a metallic finish.
Alape basins and washbasins are almost exclusively made of glazed steel. Steel has qualities that are superior to the almost traditional material of ceramics in many respects. Glazed steel is significantly more resilient and hard-wearing than the classic ceramic basin. In addition, a steel basin is more impact-resistant and, thanks to a special firing process, offers a long-lasting, hygienic surface. Steel opens up a variety of shapes, surfaces and dimensions with unique precision for Alape. The closed, non-porous surface of Alape washbasins and Alape basins is absolutely hygienic, paint-repellent, colourfast as well as permanently corrosion-protected, scratch-resistant and wear-resistant.
Alape vanity unit & Alape washbasin vanity unit
Alape vanity units and washbasin vanity units are available in the Alape Folio series. Here, complete washplaces – consisting of a combination of washbasin with vanity unit – are offered.
Alape Folio
The Alape washbasins from the Folio series were launched in 2016 and enjoy maximum popularity among customers. Folio washbasins bring material lightness and technological precision into perfect harmony. The Alape washbasins are available in the following silk matt lacquer finishes: Fossil Grey, Moonstone, Aubergine, Shadow Earth and White. The basins are each available with or without tap hole and with or without overflow. With "Folio", Alape has developed an innovative washbasin. To achieve this, Alape is exhausting the possibilities in the production of washbasins made of glazed steel. Because "Folio" is not just a simple basin. The exact geometry, the minimal radii and the flat surfaces are the result of high-precision manufacturing work. A 3 mm thick cover of glazed steel folds precisely around the washbasin and envelops it like a wafer-thin sheet. This makes "Folio" a pioneer of new design possibilities.
Surfaces of the Alape bathroom products
As already mentioned, Alape surfaces are extremely resilient and durable. You can enhance them with the "easy-care" and "antibacterial" finishes. Easy-care is, as the name suggests, a special Alape coating that improves the beading of water and thus makes it much easier to care for the basins. The antibacterial-coated basins are recommended for public facilities or surgeries.
Bathroom furniture by Alape
In addition to basins and washbasins, Alape also offers a wide portfolio of furniture. These are made exclusively from high-quality materials, be it glass, wood or stone. In the case of the natural stones, every surface with its fine and unique structures, colour nuances and inclusions is even a real one-off from Alape. We would be happy to offer you a complete Alape installation on request, some of which we also present in our showroom as inspiration. Alape offers you three programmes: A˘system addit, A˘system init as well as made-to-measure. Alape A˘system addit is the modular furniture programme specifically for Alape washbasins, whereby you can combine them with furniture modules. With the Alape A˘system init, you integrate the basin into support panels and/or furniture. Thanks to the customised design, it is possible to meet all requirements.
Alape mirrors
Not only Alape washbasins, but also the mirrors from Alape are convincing. With or without a light, round or square and in various sizes, they provide special moments in the bathroom. After all, for many people the morning starts with a first glance in the mirror. Dimmable LED lighting can provide support.
Products by Alape
A brief overview of the various products provides an overview of Alape's wide range.
- Alape 2step: Washbasin with narrow basin rim and characteristic design of the tap bench
- Assist: Storage system to complement the Alape bathroom furniture
- Alape Bicolor: Washbasins that play with the contrasts black and white and matt and shiny
- Dark Iron: Washbasin in shiny metallic surface
- Alape Folio: Washbasin solutions in silk matt lacquer finishes
- Alape Fusion.S: Square washbasins
- Alape Metaphor: Washbasin in clear, concentrated form
- Alape Piccolo: Compact washbasin for the guest WC with angular console and round bowl basin
- Alape Sondo: Washbasin in round shape and with thin rim
- Alape Stream: Washbasins of all types in angular shape with ideal flow behaviour of the water
- Alape Unisono: Round built-in and countertop basins
- Alape WP.Insert: Washbasins as wall or corner solution with washbowl on the left, shelf and towel rail on the right
- Alape X.plicit: Washbasin solution of different types with low basin height in clear design
- Alape Xplore.S: Washbasin solutions for the guest bathroom in angular design