Bette accessories
Sealing system, installation elements, handles, drain and overflow fittings - you can find all this in the Bette accessories section. If you do not find the desired accessories here, please contact us, we will be happy to help.
Prod. no.:
B600-000
Bette Drain and overflow set Multiplex M5
- 40/50 x 540mm (DN x Bowden cable length)- white- for BetteArco, BetteBambino, BetteClassic, BetteDuett, BetteDuo, BetteForm, BetteRomantica, BetteSet, BetteSteel, BetteStufenwanne, LaBette
Variants from €109.40*
Prod. no.:
B602-000
Bette Drain and overflow set Multiplex M5 extended
- 40/50 x 725mm (DN x Bowden cable length)- white- for BetteComodo, BetteCora, BetteFree, BetteLuna, BetteLux, BetteMetric, BetteOcean, BetteOne, BetteSelect, BetteStarlet, BetteSteel
Variants from €118.46*
Prod. no.:
B57-0232
Bette Support foot
- Height-adjustable foot for additional support of shower surfaces and shower trays BetteUltra 25/35mm.- Mounting during installation- Adjustment range 90 - 150mm
Prod. no.:
B603-000
Bette Drain and overflow set Multiplex M5 special, for 190 x 90cm and 200 x 100cm
- 40/50 x 1070mm (DN x Bowden cable length)- white- for BetteFree, BetteLux, BetteLux Highline, BetteSelect, BetteStarlet, BetteStarlet Flair Oval, BetteStarlet Oval
Prod. no.:
B57-0426
Bette Level support foot under 1000mm
- Height-adjustable foot for additional support of Bette shower surfaces, BetteUltra and BetteSupra. Assembly during installation. Adjustment range underneath the trays 80 - 220 mm.- From a side length of 1000 mm, we recommend the use of a support foot B57-0426.- From a side length of 1500 mm, we recommend the use of 2 support feet B57-0426.- Scope of delivery: 1 x BetteLevel mounting foot, 1 x BetteLevel adapter plate, 7 x BetteLevel spacer adapters 15 mm, 1 x release clip for pre-tensioning, 1 x threaded extensions (incl. spacer rings), 1 x locking device (incl. release clip)
Prod. no.:
B57-0080
Bette Sealing set for flush mounting
- for BetteFloor Side and super flat shower surface
Prod. no.:
B597-000
Bette Drain set Solid 30
- Barrier water height: 30 mm- Mounting height: 48 mm- drainage capacity: 0,6 l/s- incl. hair sieve- Easy access for cleaning, also via spiral- Exclusively available from Bette- Cover in white
Variants from €128.69*
Prod. no.:
B621-901
Bette Drain set Plus 5 (drain 90mm)
- 50mm higher water level for maximum bathing comfort- available for bathtubs with drain 90mm diameter
Prod. no.:
B616-000
Bette Flow drain and overflow set
- for washbasins without overflow- Operation via lever bar- length and height can be individually adapted to the washbasin- white
Variants from €60.29*
Prod. no.:
B57-0379
Bette Sealing system Pro for pentagonal showers
- enables standard-compliant installation of bath & shower tray according to DIN 18534- for pentagonal shower trays- offers highest protection against water damage- The cut protection included in the scope of delivery additionally protects the sealing system from damage by a cutter knife when the silicone joint is renewed.
Prod. no.:
B568-000
Bette Compact+ waste and overflow set
- Super-flat: only 55 mm height- Standard-compliant sealing water height of 50 mm despite super-flat design- Easy to clean: Parts can be easily removed, cover can be simply clipped on- Drain cover optionally available in chrome-plated or glazed color- High drainage capacity: 0.5 l/s (30 l/min)- Convenient, edge-free access via spiral- Drain cover optionally available in chrome-plated or glazed color- Hair strainer optionally available
Variants from €70.20*
Prod. no.:
B599-000
Bette Air Down drain set
- Suitable for: Shower tile- Category: Drain and overflow- Particularly easy to clean- Edges in the drain reduced to a minimum- The drainage capacity is 0.6 l/s and a sealing water height of 50 mm- Installation height 81 mm- white
Prod. no.:
B57-0230
Bette Underfoaming set
- additional center support for the installation of BetteFlorr and Bette shower trays Superflat
Prod. no.:
B640-000
Bette Mono waste and overflow set
- Height 115mm, diameter 52mm, drainage rate 0.92l/s, overflow rate 0.63l/s- white enameled- including hair strainer
Prod. no.:
B57-0372
Bette Sealing system for bathtubs
- waterproof installation- wall sealing- prefabricated corner elements for fast and safe installation- sealing tapes particularly flexible adaptable- including sound insulation and tile insulation strips- for bathtubs
Prod. no.:
B641-000
Bette Mono Flow waste and overflow set with inlet
- Height 115mm, diameter 52mm, drainage rate 0.92l/s, overflow rate 0.63l/s- white enameled- including hair strainer
Prod. no.:
B57-0370
Bette Sealing system for rectangular shower trays
- waterproof installation- wall sealing- prefabricated corner elements for fast and safe installation- sealing tapes particularly flexible adaptable- including sound insulation and tile insulation strips- for rectangular shower trays
Prod. no.:
B598-000
Bette Drain set Solid 50
- Water barrier height: 50 mm- Installation height: 68 mm- Drainage capacity: 0.6 l/s- incl. hair strainer- Easy access for cleaning, also by spiral- Exclusively available from Bette- Cover in white
Variants from €128.69*
Prod. no.:
B57-0401
Bette Air installation box
- Plug and Play solution for the safe connection of the BetteAir shower tile.- All necessary components are pre-assembled in a box ex works and only need to be connected to the waste water pipe- 675 x 600 x 229 mm- Expanded polypropylene (EPP)- Box made of EPP - Building protection cover made of corrugated cardboard E1.03 - Pre-assembled flex connector - Sealing collar - Foil adhesive
Prod. no.:
B574-000
Bette Scope drain set
- Drain diameter 90mm- installation height: 60 mm- drainage capacity: 0,85 l/s- with removable odor trap- hair sieve included- drainage direction: lateral- cover in white
Variants from €128.50*
Prod. no.:
B57-0420
Bette Level mounting feet for showers under 1000mm
- optimally supports the load in the edge area- allows perfect height adjustment during installation- Can be adapted and scaled for any installation situation- Can be used universally for all Bette shower surfaces- 4 x BetteLevel mounting foot- 4 x BetteLevel adapter plate- 32 x BetteLevel distance adapter 15mm
Prod. no.:
B57-0408
Bette Sealing tape on roll, 4m
- The sealing tape is absolutely resistant: Even acids, alkalis and microorganisms cannot harm it.
Prod. no.:
B525-000
Bette Air 50 drain set
- Suitable for: Shower tile- Category: drain and overflow- especially easy to clean- edges in the drain reduced to a minimum- The drainage capacity is 0.6 l/s and a barrier water height of 50 mm- construction height is particularly flat with 68 mm- white
Prod. no.:
B57-0400
Bette Easy Connect installation box
- Standard-compliant installation without additional sealing tape at the tub edge- Reduction of on-site effort due to factory-prefabricated components- Tested sealing components included in delivery- Can be combined with built-in bathtubs, free-standing bathtubs, slightly raised shower trays with minimum tub support- installation height: 105 - 205 mm- 508 x 308 x 229mm
Prod. no.:
B606-000
Bette Drain and overflow set with inlet Multiplex Trio MT5 extended
- 40/50 x 725mm (DN x Bowden cable length)- white- for BetteComodo, BetteCora, BetteFree, BetteLuna, BetteLux, BetteMetric, BetteOcean, BetteOne, BetteSelect, BetteStarlet, BetteSteel
Variants from €325.39*
Prod. no.:
B643-000
Bette Mono Flow Silhouette waste and overflow set with inlet
- Made of glazed titanium steel- Drain and overflow set with inlet- Click valve- The bathtub is filled via an inlet integrated into the overflow- white
Prod. no.:
B619-901
Bette Drain set Plus 5 extended
- 50mm higher water level for maximum bathing comfort- available for bathtubs with drain 52mm diameter
Prod. no.:
B57-0374
Bette Sealing system for pentagonal shower trays
- waterproof installation- wall sealing- prefabricated corner elements for fast and safe installation- sealing tapes particularly flexible adaptable- including sound insulation and tile insulation strips- for pentagonal shower trays
Prod. no.:
B57-0373
Bette Sealing system for quadrant shower trays
- waterproof installation- wall sealing- prefabricated corner elements for fast and safe installation- sealing tapes particularly flexible adaptable- including sound insulation and tile insulation strips- for quadrant shower trays
Prod. no.:
Y102-000
Bette BetteAir drain cover
- made of glazed steel, for BetteAir drain sets- white enameled- without special coating
Prod. no.:
B577-901
Bette Drain set 52mm
- diameter 52mm- chrome- to BetteIntra 150mm
Prod. no.:
B50-0016
Bette Height adjustable feet B50-0016
- Adjustment range 130 - 180mm
Prod. no.:
B57-0378
Bette Sealing system Pro for quadrant showers
- enables standard-compliant installation of bath & shower tray according to DIN 18534- for quadrant shower trays- offers highest protection against water damage- The cut protection included in the scope of delivery additionally protects the sealing system from damage by a cutter knife when the silicone joint is renewed.
Prod. no.:
Y100-000
Bette Glazed drain cover 115mm
- for drain fittings for shower trays 90mm- white enameled- without special coating
Prod. no.:
B631-000
Bette Sensory drain set white
- white- For the installation of the drain set, a 12 V power connection below the tub is required- an 8 m long cable for connection of the control box is included in delivery- control box can be integrated into a flush-mounted box and requires a 230 V power connection- BETTESENSORY combines tub drain and tub overflow in a single element- The hidden overflow in the bottom of the bathtub allows for a perfect look, especially in freestanding bathtubs- Without visible overflow, the design of the bathtub body is shown off to its best advantage- A specially developed control electronics with integrated pressure sensor opens the drain as soon as the water level exceeds a certain height- This innovative technical equipment detail developed by BETTE together with Viega is available for the following bathtub models:BETTEARTBETTEFREEBETTELUXBETTELUX OVALBETTEONEBETTEONE RELAXBED SILHOUETTEBETTEHIGHLINE
Variants from €799.94*
Prod. no.:
B50-0005
Bette Spacers 4 pieces
- for deviating installation heights in the adjustment range 205 - 235mm- 4 pieces
Prod. no.:
B642-000
Bette Mono Silhouette waste and overflow set
- Drain and overflow set- glazed titanium steel- Click valve- white
Prod. no.:
B533-901
Bette Silhouette M5 spring inlet
- As if fed by an underground spring, the water level in the tub rises- Filling the tub is particularly comfortable and quiet, only 9 dB (A) compared to 21 dB (A) for conventional tub drains- Drainage capacity at 300 mm accumulation height:Ø 90 mm: 1.0 l/sØ 52 mm: 0.85 l/s- Maximum inflow capacity: 30 l/min.
Prod. no.:
B50-0007
Bette Spacers 8 pieces
- for deviating installation heights in the adjustment range 205 - 235mm- 8 pieces
Prod. no.:
Z0015725
Bette Drain cover
- made of chrome-plated plastic- for shower tray drain fittings 90mm- 115mm diameter
Prod. no.:
B594-000
Bette Down drain set
- Drain diameter 90 mm- Installation height: 81 mm- Drainage capacity: 0.6 l/s- With removable odor trap- Water trap height 50 mm- Drainage direction: vertical- Cover in white
Variants from €134.54*
Prod. no.:
B607-000
Bette Drain and overflow set with inlet Multiplex Trio MT5, special, for 190 x 90cm and 200 x 100cm
- 40/50 x 1070mm (DN x Bowden cable length)- white- for BetteFree, BetteLux, BetteSelect, BetteStarlet
Variants from €360.49*
Prod. no.:
B609-000
Bette Rotaplex R5 extended waste and overflow set for Silhouette
- 40/50 x 725mm (DN x Bowden cable length)- white- for BetteHome Oval Silhouette
Variants from €239.10*
Prod. no.:
B553-901
Bette Spring inlet Silhouette R5
- As if fed by an underground spring, the water level in the tub rises- Filling the tub is particularly comfortable and quiet, only 9 dB (A) compared to 21 dB (A) for conventional tub drains- Drainage capacity at 300 mm accumulation height:Ø 90 mm: 1.0 l/sØ 52 mm: 0.85 l/s- Maximum inflow capacity: 30 l/min.