BEMM
BEMM is a leading manufacturer of designer radiators, offering innovative solutions for bathroom and room heating since 1979. As part of the IRSAP Group, a European market leader with over 50 years of experience, BEMM combines technical expertise with aesthetic design. With a wide range of products, including energy-saving radiators for low-temperature systems and hybrid technologies for heating and cooling, BEMM offers customised solutions for new builds, modernisation and commercial construction.
Prod. no.:
ZPUVECR5
BEMM M-valve Purline angle shape, with thermostat Puro
- M-valve Purline DN15 x 50 mm with presetting, for filling, shutting off and draining, for use in 2-pipe systems up to 10 bar operating pressure, with any flow direction, nickel-plated, with thermostat connection thread M30 x 1.5 with protective cap, with 2 special screw-in connectors with O-ring DN 15 (1/2) and male DN 20 (3/4) Eurocone for pipe connection using compression fitting- Thermostatic head generally on the left, flow direction may be determined by radiator requirements- Complete with elegant Purline cover made of impact-resistant plastic in the color chrome or in the color of the radiator, including Allen screw and logo cover- Valve and cover packed in 1 box- Including Puro thermostat, elegant, slimline designer radiator controller, with built-in fluid element, with chrome-plated handle sleeve- In unfavorable lighting conditions or for the visually impaired, the basic setting 3 can be easily found again using the tactile setting aids- For valve connection M30 x 1.5- Minimum position: Zero position
Variants from €81.46*
Prod. no.:
ZAXMHTH4CR
BEMM Universal magnetic towel rail 440mm
- BEMM magnetic towel rail universal, straight slim rectangular tube, with 2 strong magnetic holders with rubberized contact surface to protect the radiator surface, depth 74 mm- Suitable for Page, Ceroc, Triola, ChaCha and Piano- chrome
Variants from €55.16*
Prod. no.:
ZVXMEP15ECR5
BEMM MEP valve (bivalent) DN 15 x 50 in angle design
- MEP valve (bivalent), DN 15 x 50 mm in angle design, with presetting, can be shut off, for use in 2-pipe systems up to 10 bar operating pressure and 110 °C operating temperature- Valve insert and insert for return shut-off can be exchanged, allowing the valve (flow) to be installed on the left or right as required- Thermostat connection thread M30x1.5 with protective cap- Solid chrome-plated valve design- For connecting copper, mild steel and plastic pipes, use on-site compression fittings for Eurocone with DN 20 (3/4) male thread
Prod. no.:
BCH084050ATE04N
BEMM ChaCha NOW EK WIFI Smart electric bathroom radiator
- BEMM ChaCha NOW EK, complete electric radiator series BCH-NOW, for purely electric operation incl. WiFi Smart heating element with room temperature control for room heating and for heating towels and textiles- Straight horizontal oval panel pipes 50 x 10 mm connected to the vertical round pipes 30 mm in a water-bearing manner using a special welding process to save energy- Filled with heat transfer fluid (frost protection -6 degrees C)- Horizontal pipes arranged with many openings for hanging towels and textiles on the side- Heating element mounted at the bottom right as standard- Unused connections sealed watertight with DN15 (1/2) blind plugs with hexagon socket- Environmentally friendly, emission-free DIN 55900 powder-coated surface and baked at approx. 180 degrees C- anthracite gray- Standard accessories: 4 stable, easy-to-install fastenings made of steel comply with AK3 according to VDI 6036, with hexagonal wood screws and dowels- Heating element equipped with WiFi smart home functions in conjunction with IRSAP NOW app- Receiver and switching unit in the housing, with stainless steel immersion body with DN 15 (1/2) connection thread with O-ring- Switch housing with LED temperature display and approx. 0.8 m red connection cable and safety plug, mains voltage 230 V / 50 Hz, class II, IP44, plastic housing painted in the same color as the radiator- Complies with the guidelines of the statutory accident insurers (GUV), complies with the Ecodesign Directive from 01.01.2018 regarding electric single-room heaters- 849 x 500mm, 400 watt heat output
Variants from €1,139.58*
Prod. no.:
ZAXHAB4CR
BEMM Towel rack 350mm
- chrome-plated- with 2 special fasteners for mounting between two horizontal or vertical round tubes- suitable for Cobo 1, Cobo 2, Rondo series, Kart Plus, Mido, Ares, BMS
Variants from €154.92*
Prod. no.:
BMQ087058SWE05D
BEMM MIDO Q EK-R electric bathroom radiator
- Bemm Mido Q EK, complete electric bathroom radiator series BMQ-EK, for electric operation only incl- Heating element with digital clock room thermostat, for heating towels and textiles and for room heating- Horizontal rectangular tubes 25 x 20 mm connected to the vertical square tubes 30 x 30 mm using a special process- With 1 to 3 openings for towels- Filled with heat transfer fluid (frost protection down to - 6 degrees C), heating element fitted at the bottom right as standard- Environmentally friendly, emission-free DIN 55900 powder-coated surface and baked at approx. 180 degrees C- Standard color white 9016- Standard accessories: 4 sturdy, easy-to-install steel fixings comply with AK3 according to VDI 6036, with hexagonal wood screws and dowels- Heating element with thermal fuse and stainless steel immersion heater with DN 15 (1/2) connection thread with O-ring, with mounted clock room thermostat with approx. 1.2 m connection cable and plug, mains voltage 230 V / 50 Hz, class II, IP44- Digital clock room thermostat with integrated infrared sensor for optionally available IR remote control, with 2 preset programs with daily repetition and 1 individually programmable weekly program, timer for 2 hours, vacation function, frost protection function, button lock, open window function, setting range 10 - 32 degrees C, white housing- Complies with the guidelines of the statutory accident insurers (GUV), Complies with the Ecodesign Directive from 01 01 2018 regarding electric single-room heaters- 500 watts- 872 x 580mm
Prod. no.:
PZPHTA047CR
BEMM Plawa Purline towel arm 475
- BEMM Plawa Purline towel rail, accessory for sliding textiles over the side, can be positioned on the left or right in any number and at any height- 475 mm, height 40 mm and approx. 50 mm depth from front edge of radiator to outer edge of towel rail- Fitting before installation of the radiator- Can only be retrofitted with Plawa removed- chrome
Variants from €139.07*
Prod. no.:
ZEIRDFERNSW
BEMM IR remote control for electric heating element
IR remote control Trend for electric immersion heater with room control Trend D, consisting of remote control with illuminated display and wall bracket, white housing, dimensions 125x48x28 mm (LxWxH)-
Prod. no.:
BCH084050AT2UG
BEMM ChaCha hot water bathroom radiator
- BEMM ChaCha, bathroom radiator series BCH, for central heating (additional equipment with electric heating element) and for heating towels and textiles- Straight horizontal flat profile tubes 50 x 10 mm connected to the vertical round tubes 30 mm in an energy-saving, water-bearing manner using a special welding process- Horizontal tubes arranged regularly throughout with many gaps for hanging towels and textiles on the sides- Bathroom radiator can be turned upside down (either connections on the left and swings to the right or connections on the right and swings to the left)- Vertical pipes positioned 50 mm apart for flow and return- With DN 15 (1/2) x50 mm connections on one side at the top and bottom- Environmentally friendly, emission-free DIN 55900 powder-coated surface and baked at approx. 180 degrees C- Standard color white 9016, optionally in other colors according to BEMM color palette- Standard accessories: 2 vent plugs DN 15 (1/2) and 4 stable, easy-to-install fastenings made of steel comply with AK4 in accordance with VDI 6036, with hexagonal wood screws and dowels- Complies with the guidelines of the statutory accident insurers (GUV), thermal performance in accordance with DIN EN 442-2- CE declaration of performance in accordance with EU-BauPVo- Heating medium water: maximum permissible operating temperature 100°C maximum permissible operating overpressure 4 bar- 849 x 500mm- anthracite gray
Variants from €564.46*
Prod. no.:
ZENELM04CR
BEMM Electric immersion heater series N with medium temperature controller
- Electric heating element N series with medium temperature controller, heating element consisting of electric heating element with NTC thermal fuse and stainless steel immersion body with DN 15 (1/2) connection thread with O-ring- Heating rod and NTC temperature sensor (medium temperature) connected to medium temperature controller, mains voltage 230 V / 50 Hz, IP44, class I, connection cable approx. 0.8 m with safety plug, setting range 20 degrees C to 65 degrees C (surface temperature approx. 18-50 degrees C), timer for 3 different boost functions (maximum heating power to 65 degrees C from the set target temperature, standby mode (i.e. without heating function), indicator lamp, chrome-plated plastic housing, grey cable- Dimensions 115x70x38 mm (WxHxD)- For towel warmers for use with underfloor heating or other central heating radiators for room temperature control
Variants from €194.24*
Prod. no.:
ZAXBVCR
BEMM Fastening for Mera, Vera, Aura, Era and Krera
- Vertical mounting in 3 surface groups and completely new design, suitable for vertical round pipes 25 mm diameter- For BEMM radiator series Mera, Vera, Aura, Era and Cobo V- Suitable for Les Appliques accessories- chrome
Variants from €17.86*
Prod. no.:
ZEPELS04
BEMM Electric heating element P series with plug
- P series electric immersion heater with plug, heating element with PTC element, protection class IP55, class I, mains voltage 230 V, stainless steel immersion body with DN 15 (1/2) connection thread, O-ring and hexagon with approx. 1.0 m connection cable with stranded wire- For use as an individual room heater, add the required control unit (following pages) or on site (Smarthome)
Prod. no.:
ZVXTOCR
BEMM Thermostat Puro
- Elegant, slim design- with built-in liquid element- in unfavorable lighting conditions or for the visually impaired, the basic setting "3" can be easily found again using the tactile adjustment aids- for connection M30 x 1.5- chrome/chrome
Variants from €25.04*
Prod. no.:
ZENELF04CR
BEMM F series electric immersion heater with medium temperature controller and IR remote control
- BEMM electric heating element series F Smart with medium temperature controller including IR remote control, consisting of electric heating element with NTC thermal fuse and stainless steel immersion heater with DN 15 (1/2) connection thread with O-ring- Heating element and NTC temperature sensor (medium temperature) connected to medium temperature controller, mains voltage 230 V / 50 Hz, IP44, class I, connection cable approx. 0.8 m with safety plug, setting range 30 °C to 70 °C (surface temperature approx. 25-60 °C), Timer for 2h boost function (maximum heating power to 70 degrees C from the set target temperature), standby mode (i.e. without heating function), manual setting option (comfort), ECO (maximum heating to 50 degrees C), frost protection, button lock, indicator light, chrome-plated plastic housing, cable and plug in gray- Dimensions 56x56x44 mm (WxHxD)- Including IR remote control, white- For towel warmers for use with underfloor heating or other central heating radiators for room temperature control
Variants from €205.80*
Prod. no.:
BCH084050SWE04M
BEMM ChaCha EK-M electric bathroom radiator
- BEMM ChaCha EK, complete electric towel warmer series BCH-EK, for pure electric operation incl. heating element with medium temperature controller, for heating towels and textiles and for room heating- Straight horizontal oval panel pipes 50 x 10 mm connected to the vertical round pipes 30 mm in an energy-saving, water-bearing manner using a special welding process- Horizontal pipes arranged regularly throughout with many gaps for hanging towels and textiles at the side- Filled with heat transfer fluid (frost protection down to -6°C)- Heating element including controller is fitted at the bottom left as standard- By turning the radiator upside down and converting the heating element and controller, the radiator can also be mounted with the swing arms to the left- Unused connections are sealed watertight with blind plugs DN15(1/2) with hexagon socket- Heating element (ZENELM_) with thermal fuse and stainless steel immersion body with DN 15 (1/2) connection thread with O-ring- Thermostat with approx. 0.8 m connection cable and safety plug, mains voltage 230 V / 50 Hz, class I, IP44, with regulation of the medium temperature, setting range 20 °C to 65 °C (surface temperature approx. 18-50 °C), timer for 3 different boost functions (maximum heating power to 65 °C from the set target temperature), standby mode (i.e. without heating function), indicator light, housing and connection cable made of white plastic- Environmentally friendly, emission-free DIN 55900 powder-coated surface and baked at approx. 180°C- White RAL 9016(standard)- Standard accessories: 1 additional blind plug DN15 (1/2) with hexagon socket and 4 sturdy, easy-to-install fastenings made of steel that comply with AK3 according to VDI 6036, with hexagon wood screws and plugs- Complies with the guidelines of the statutory accident insurers (GUV)- 849 x 500mm, 400 Watt heat output
Prod. no.:
ZMUVECR5
BEMM M-valve Softline angle shape, with thermostat Puro
- M-valve Softline DN15 x 50 mm with presetting, for filling, shutting off and draining, for use in 2-pipe systems up to 10 bar operating pressure, with any flow direction, nickel-plated, with thermostat connection thread M30 x 1.5 with protective cap, with 2 special screw-in connectors with O-ring DN 15 (1/2) and male DN 20 (3/4) Eurocone for pipe connection using compression fitting- Thermostatic head generally on the left, flow direction may be determined by radiator requirements- Complete with elegant Softline cladding made of impact-resistant plastic in the color chrome or in the color of the radiator- Valve and cover packed in 1 box- Including Puro thermostat, elegant, slimline designer radiator controller, with built-in fluid element, with chrome-plated handle sleeve- In unfavorable lighting conditions or for the visually impaired, the basic setting 3 can be easily found again using the tactile setting aids- For valve connection M30 x 1.5- Minimum position: Zero position
Variants from €88.60*
Prod. no.:
BTR118050AT2UG
BEMM Triola hot water bathroom radiator 1184 x 500mm
- BEMM Triola, top bathroom radiator series BTR, for central heating (additional equipment with electric heating element) and for heating towels and textiles- Straight horizontal oval panel tubes 70 x 11 mm connected to the vertical square tubes 40 x 40 mm in an energy-saving, water-bearing manner using a special welding process- Horizontal tubes arranged regularly throughout for hanging towels and textiles from the side- Bathroom radiator can be turned upside down (either connections on the left and horizontal pipes to the right or connections on the right and horizontal pipes to the left)- Vertical pipes positioned 50 mm apart for flow and return- With DN 15 (1/2) x 50 mm connections on one side at the top and bottom- Environmentally friendly, emission-free DIN 55900 powder-coated surface and baked at approx. 180 degrees C- AT anthracite grey, optionally in a different color according to the BEMM color palette- Standard accessories: 2 vent plugs DN 15 (1/2) and 4 stable, easy-to-install fastenings made of steel comply with AK3 in accordance with VDI 6036, with hexagonal wood screws and dowels- Complies with the guidelines of the statutory accident insurers (GUV), thermal performance in accordance with DIN EN 442-2- CE declaration of performance in accordance with EU-BauPVo- Heating medium Water Maximum permissible operating temperature 100°C Maximum permissible operating pressure 4 bar
Variants from €623.25*
Prod. no.:
ZEXBFUTSW
BEMM Comfort radio clock room thermostat
- Radio clock room thermostat comfort, consisting of radio clock room thermostat, digital with weekly program with 9 preset programs, individually programmable, vacation and party function, frost protection function, button lock, setting range 5 - 35 degrees C, IP30, incl- 2 batteries type AAA LR031.5 V, white housing, dimensions 83x80x27 mm (WxHxD)- In combination with radio receiver
Prod. no.:
ZVXTTK1
BEMM Testa thermostat
- Testa, elegant, slimline designer radiator controller, with built-in liquid element, in black velvety matt- For valve connection M30 x 1.5, dimensions 70x39x39 mm (WxHxD)- Minimum setting: frost protection
Prod. no.:
BZXZUBBMS6V
BEMM Ares EK, Mido, BMS series and Kart 1 Plus mounting accessories
- Vent plug, dummy plug, 3 special wall mounting elements, depth-adjustable- with hexagonal wood screws and plugs- anthracite gray
Variants from €31.39*
Prod. no.:
ZEPELK04SW
BEMM Electric immersion heater P series with radio room control comfort
- Electric heating element P series with radio room control comfort, consisting of electric heating element with PTC element, IP55, class I, with approx. 1.0 m connection cable u- Radio receiver, for mounting and connection to flush-mounted box, class II, 230 VAC, maximum switching capacity 16 A, IP30, white housing dimensions 87x87x20mm (WxHxD), as well as radio room thermostat, digital with weekly program with 9 preset programs, individually programmable, holiday function, frost protection and party function- individually programmable, vacation and party function, frost protection function, button lock, setting range 5 - 35 degrees C- IP30, incl- 2 batteries type AAA LR03 1.5 V, white plastic housing and cable, dimensions 83x80x27 mm (WxHxD)- Control complies with the Ecodesign Directive for individual room heaters
Prod. no.:
ZAXSTB2SW
BEMM Stendino bracket 220mm
- Stendino bracket, approx. 85 mm deep from front edge of radiator to outer edge of bracket, to be fitted to the BEMM radiator series Rondo S, Mera, Vera, Aura, Era and Cobo V using the special ZA B fixings to be ordered separately- white
Prod. no.:
ZAXKNCR
BEMM Button
- Knob, chrome-plated, approx. 50 mm long, 22 mm diameter, with special fastening for mounting from the front between two horizontal or vertical round pipes, suitable for all BEMM bathroom radiator series as well as Cobo V, Mera/Vera, Aura, Era, and Krera- Product: BEMM GmbH 31180 Emmerke
Prod. no.:
ZMTVEK15
BEMM M-valve Purline with thermostat Testa, angle shape
- M-valve Softline DN15 x 50 mm with presetting, for filling, shutting off and draining, for use in 2-pipe systems up to 10 bar operating pressure, with any flow direction, nickel-plated, with thermostat connection thread M30 x 1.5 with protective cap, with 2 special screw-in connectors with O-ring DN 15 (1/2) and male DN 20 (3/4) Eurocone for pipe connection using compression fitting- Thermostatic head generally on the left, flow direction may be determined by radiator requirements- Complete with elegant Softline cover made of impact-resistant plastic in velvety black, including spacer, Allen screw and logo cover- Valve and cover packed in 1 box- Including Testa thermostat, elegant, slimline design radiator controller- For valve connection M30 x 1.5- Minimum setting: frost protection
Prod. no.:
ZAXHTGR0370256V
BEMM Hang UP towel rail-R 370mm
- slim round tube 25mm- 370mm wide- Axial dimension 272mm- with special fastening for mounting between two horizontal or vertical round tubes- anthracite gray
Prod. no.:
ZMXVECR5
BEMM M-valve Softline angle shape, without thermostat
M-valve Softline DN 15 x 50 mm with M-casing, with pre-setting, for filling, shutting off and draining, connection thread M30x1.5 with construction protection compression fitting-- In corner or straight-through design- Complete with elegant M cladding made of impact-resistant plastic in the color BEMM white or- in the color of the radiator or- chrome-plated, including spacer, Allen screw and logo cover- Valve and cover packed in 1 box-
Variants from €71.91*
Prod. no.:
PVG120049SW3SBG
BEMM Plawa Purline glass edition hot water bathroom radiator 1200 x 495mm
- BEMM Plawa Purline Glass Edition, vertical flat bath/room heater, PVG series, for central heating operation (additional equipment with electric heating element) with flat front, fine side lines and lateral shadow light joints as well as attached glass front- Basic body without convection fins in welded design made of horizontal round tubes 35 mm and two rows of vertically arranged flat profile tubes 50 x 10 mm, powder-coated- The sides of the front are set at a 60 degree angle to the inside, leaving a gap to the wall for shade or light- The sides have a concealed rebate to accommodate the optional LED backlighting- Flat front harmoniously conceals the complete valve set with center connection DN 15 (1/2) x 50 mm for flow on the left or right and corner connection with Euro cone for compression fitting, only the control knob of the optional thermostat is visible- Additional connection for electric heating rod DN 15 (1/2) from the bottom left- Utility model number 202011109465- 4, design number 001942178- Environmentally friendly, emission-free powder-coated surface DIN 55900 and baked at approx. 180 degrees C- Standard color white 9016, optionally in other colors according to BEMM color palette- Glass front, SBG version = brown light glass- Standard accessories: Valve set consisting of presettable thermostatic valve, return screw fitting and connection parts, vent plug DN8 (1/4) and 1 wall bracket complies with AK 3 according to VDI 6036, with screws and plugs- Optional: towel rail(s) left/right for use in kitchen and bathroom- Optional: LED backlighting as design and orientation light- Complies with the guidelines of the statutory accident insurers (GUV), thermal performance in accordance with DIN EN 442-2- CE declaration of performance in accordance with EU-BauPVo- Heating medium Water Maximum permissible operating temperature 100°C Maximum permissible operating pressure 6 bar
Prod. no.:
ZEXTSA22C230SW
BEMM Electric actuator 22CX
- Electric actuator 22C, suitable for thermostat connection M30x1.5 mm, 230 VAC/50 -60Hz, average power consumption 1.8 W, IP54, 2-point controller normally closed (NC), 1.0 m connection cable, white housing- Actuator in combination with room thermostat 230V
Prod. no.:
PVP120049AT3MB
BEMM Plawa Purline hot water bathroom radiator 1200 x 495mm
- BEMM Plawa Purline, vertical flat heating wall for central heating operation (additional equipment with electric heating element) with flat front, fine side lines and lateral shadow (light) gaps- Basic body without convection fins in welded design made of horizontal round tubes 35 mm and two rows of vertically arranged flat profile tubes 50 x 10 mm, powder-coated- The sides of the front are set at a 60° angle to the inside, leaving a gap to the wall for shade or light- The sides have a concealed rebate to accommodate the optional LED backlighting- Flat front harmoniously conceals the complete valve set with center connection DN 15 (1/2) x 50 mm for flow on the left or right and corner connection with Euro cone for compression fitting, only the control knob of the optional thermostat is visible- Additional connection for electric heating rod DN 15 (1/2) from the bottom left- Utility model number 202011109465.4, design model number 001942178- Surface of the front and sides environmentally friendly, emission-free powder-coated DIN 55900 and baked at approx. 180 degrees C- anthracite grey, optionally in a different color according to the BEMM color palette- Standard accessories: Valve set consisting of presettable thermostatic valve, return screw fitting and connection parts, DN8 (1/4) vent plug and 1 wall bracket with screws and plugs- Optional: towel rail(s) left/right for use in kitchen and bathroom- Optional: Towel rail(s) left/right for use in kitchen and bathroom- Optional: LED backlighting as design and orientation light- Heat output in accordance with EN 442, tested by a recognized institute- Heating medium water: maximum permissible operating temperature 100 degrees C maximum permissible operating pressure 6 bar
Variants from €985.02*
Prod. no.:
BMB081040AT5M
BEMM MIDO hot water bathroom radiators
- BEMM Mido, bathroom radiator series BMB, for central heating (additional equipment with electric heating element) and for heating towels and textiles- Horizontal round tubes 23 mm connected to vertical all-round smooth semi-oval tubes 30 x 40 mm using a special process- With openings for towels- With M connection DN 15 (1/2) x 50 mm centered at the bottom and 2 connections DN 15 (1/2) from the bottom, right and left outside, as well as 1 vent connection DN 15 (1/2) from the top right- Environmentally friendly, emission-free powder-coated surface DIN 55900 and baked at approx. 180 degrees C- anthracite gray- On request: other colours according to the BEMM colour range, optionally galvanized under the powder coating- Standard accessories: vent plug DN 15 (1/2) in nickel-plated design with special seal, 3 easy-to-install, depth-adjustable fastenings that can be fixed from the front (AK 2-3 in accordance with VDI 6036 depending on size), including 3 hexagonal wood screws with dowels- Complies with the guidelines of the statutory accident insurers (GUV), thermal performance in accordance with DIN EN 442-2, measured by a recognized testing institute- CE declaration of performance in accordance with EU-BauPVo Heating medium water Maximum permissible operating temperature 100°C Maximum permissible operating overpressure 10 bar- 818 x 400mm- If a heating cartridge is used, Bemm recommends a maximum output of 400 watts
Variants from €176.00*
Prod. no.:
PVS120047AT3MB
BEMM Plawa Softline hot water bathroom radiator 1200 x 470mm
- BEMM Plawa Softline, vertical flat heating wall for central heating operation (additional equipment with electric heating element) with flat front, fine side lines and lateral shadow (light) gaps- Basic body without convection fins in welded design made of horizontal round tubes 35 mm and two rows of vertically arranged flat profile tubes 50 x 10 mm, powder-coated- The semi-circular, soft sides end inwards at a 60° angle, leaving a gap to the wall for shade or light- The sides have a concealed rebate to accommodate the optional LED backlighting- Flat front harmoniously conceals the complete valve set with center connection DN 15 (1/2) x 50 mm for flow on the left or right and corner connection with Euro cone for compression fitting, only the control knob of the optional thermostat is visible- Additional connection for electric heating rod DN 15 (1/2) from the bottom left- Utility model number 202011109465.4, design model number 001942178- Surface of the front and sides environmentally friendly, emission-free powder-coated DIN 55900 and baked at approx. 180 degrees C- anthracite grey, optionally in a different color according to the BEMM color palette- Standard accessories: Valve set consisting of presettable thermostatic valve, return screw fitting and connection parts, DN8 (1/4) vent plug and 1 wall bracket with screws and plugs- Optional: towel rail(s) left/right for use in kitchen and bathroom- Optional: Towel rail(s) left/right for use in kitchen and bathroom- Optional: LED backlighting as design and orientation light- Heat output in accordance with EN 442, tested by a recognized institute- Heating medium water: maximum permissible operating temperature 100 degrees C maximum permissible operating pressure 6 bar
Variants from €985.02*
Prod. no.:
BCH084050AT2ML
BEMM ChaCha M hot water bathroom radiator version ML
- BEMM ChaCha M, bathroom radiator series BCH, for central heating (additional equipment with electric heating element) and for heating towels and textiles- Straight horizontal oval panel pipes 50 x 10 mm connected to the vertical round pipes 30 mm in an energy-saving, water-bearing manner using a special welding process- Horizontal pipes arranged regularly throughout with many gaps for hanging towels and textiles at the side- Vertical collector pipes at 50 mm intervals on the outside right Horizontal pipes open to the left- DN 15 (1/2) x 50 mm connections at the bottom center and on one side at the top and bottom right of the vertical collector pipes- Environmentally friendly, emission-free DIN 55900 powder-coated surface and baked at approx. 180 degrees C- anthracite gray- Standard accessories: 2 dummy and vent plugs DN 15 (1/2) and 4 sturdy, easy-to-install steel fixings that comply with AK3 in accordance with VDI 6036, with hexagonal wood screws and dowels- Complies with the guidelines of the statutory accident insurers (GUV), thermal performance in accordance with DIN EN 442-2- CE declaration of performance in accordance with EU-BauPVo- Heating medium water Maximum permissible operating temperature 100 °C Maximum permissible operating pressure 4 bar- ML version: Collector pipes on the left, horizontal pipes open to the right- 849 x 500mm
Variants from €641.50*
Prod. no.:
ZEPELD04CR
BEMM Electric immersion heater Series P with room control Trend D
- Electric immersion heater series P with room control Trend D, consisting of electric immersion heater with PTC element, heating element with stainless steel immersion body with DN 15 (1/2) connection thread with O-ring, with mounted clock room thermostat with approx. 1.2 m connection cable and plug, mains voltage 230 V / 50 Hz, class II, IP44- Clock room thermostat, digital with integrated infrared sensor for optionally available IR remote control, with 2 preset programs with daily repetition and 1 individually programmable weekly program, timer for 2 hours, vacation function, frost protection function, button lock, open window function, setting range 10 - 32 degrees C, white housing, dimensions 137x76x42 mm (WxHxD)- Control complies with the Ecodesign Directive for single-room heating appliances
Variants from €203.31*
Prod. no.:
ZEXBFUESW
BEMM Radio receiver
- Radio receiver, consisting of radio receiver, for mounting and connection to flush-mounted box, class 2, 230 VAC, maximum switching capacity 16 A, IP31, white housing, dimensions 87x87x20 mm (WxHxD)- Suitable for radio room thermostat and radio clock room thermostat
Prod. no.:
ZEPELB04CR
BEMM P series electric immersion heater with Bluetooth room control Stone
- P series electric immersion heater with Stone Bluetooth controller, consisting of electric immersion heater with PTC element, heating element with DN 15 (1/2) connection thread with O-ring and plug connection- With Stone Bluetooth controller, mains voltage 230 V / 50 Hz, IP44, class I, for fixed connection, with sliding rosette for concealed electrical connection from behind the wall, controller with on/off switch and digital display, can be controlled directly on the controller or using an app via Bluetooth connection from a smartphone or tablet- Room temperature or power control selectable, individually programmable, with weekly program, frost protection function, power consumption display and boost function, room temperature setting range 15-30 °C, power/consumption control (kW/kWh in 10 steps from 10-100 %)- Chrome-plated plastic housing (black front), dimensions 76x76x99-120 mm (WxHxD)- App available via Play Store (Android) or iTunes (IOS) under Stone Connect BLE- Control complies with the Ecodesign Directive for individual room heaters
Variants from €334.52*
Prod. no.:
BMA081050AT5M
BEMM MIDO ARC hot water bathroom radiator
- Bemm Mido Arc, bathroom radiator series BMA for central heating (additional equipment with electric heating element) and for heating towels and textiles- Horizontal round tubes 23 mm diameter- connected to vertical all-round smooth semi-oval tubes 30 x 40 mm in a special process without visible weld seams- The round tubes are bent so that the radiator curves forwards in an arc- With openings for towels- With M connection DN 15 (1/2) x 50 mm centered at the bottom and 2 connections DN 15 (1/2) from the bottom, right and left outside, as well as 1 vent connection DN 15 (1/2) from the top right- Environmentally friendly, emission-free powder-coated surface DIN 55900 and baked at approx. 180 degrees C- anthracite grey, other colours on request according to the BEMM colour range, optionally galvanized under the powder coating- Standard accessories: vent plug DN 15 (1/2) in nickel-plated design with special seal, 4 easy-to-install, depth-adjustable fastenings that can be fixed from the front (AK 3-4 according to VDI 6036 depending on size), including 4 hexagonal wood screws with dowels- Complies with the guidelines of the statutory accident insurers (GUV), thermal performance in accordance with DIN EN 442-2, measured by a recognized testing institute- CE declaration of performance in accordance with EU-BauPVo Heating medium water Maximum permissible operating temperature 100°C Maximum permissible operating overpressure 10 bar- 818 x 497mm- If a heating rod is used, Bemm recommends a maximum output of 400 watts
Variants from €222.95*
Prod. no.:
BTR118050AT2ML
BEMM Triola M hot water bathroom radiator 1184 x 500mm
- BEMM Triola M, top bathroom radiator series BTR, for central heating (additional equipment with electric heating element) and for heating towels and textiles- Straight horizontal oval panel tubes 70 x 11 mm connected to the vertical square tubes 40 x 40 mm in an energy-saving, water-bearing manner using a special welding process- Horizontal pipes arranged regularly throughout for hanging towels and textiles from the side- Vertical collector pipes at 50 mm intervals on the right or left outside, horizontal pipes open to the right (ML version)- DN 15 (1/2) x 50 mm connections at the bottom center and on one side at the bottom left and top in the vertical collector pipes- Environmentally friendly, emission-free powder-coated surface DIN 55900 and baked at approx. 180 degrees C- AT anthracite grey, optionally in a different color according to the BEMM color palette- Standard accessories: 2 vent plugs DN 15(1/2) and 4 sturdy, easy-to-install fastenings comply with AK3 in accordance with VDI 6036, with hexagonal wood screws and plugs- Complies with the guidelines of the statutory accident insurers (GUV), thermal performance in accordance with DIN EN 442-2- CE declaration of performance according to EU-BauPVo- Heating medium water: maximum permissible operating temperature 100 degrees C maximum permissible operating overpressure 4 bar
Variants from €746.03*
Prod. no.:
BMS081050AT5
BEMM BMS hot water bathroom radiators
- Bemm BMS, bathroom radiator series BMS, for central heating (and electric) and for heating towels and textiles- Horizontal round tubes 23 mm diameter- connected to vertical 30 x 40 mm semi-oval tubes using a special process without visible weld seams- With openings for towels- Vertical semi-oval pipes with a smooth surface all round, so BMS have 2 front sides, so to speak, and are reversible during installation- 2 external connections and 1 DN 15 (1/ 2) ventilation connection from above- Environmentally friendly, emission-free DIN 55900 powder-coated surface and baked at approx. 180 degrees C- anthracite grey, other colours on request according to the BEMM colour palette, optionally galvanized under the powder coating- Standard accessories: vent plug DN 15 (1/2) in nickel-plated design with special seal, 3 easy-to-install, depth-adjustable fastenings that can be fixed from the front (AK 3-4 according to VDI 6036 depending on size), including 3 hexagonal wood screws with dowels- Complies with the guidelines of the statutory accident insurers (GUV), thermal performance in accordance with DIN EN 442-2, measured by a recognized testing institute- CE declaration of performance in accordance with EU-BauPVo Heating medium water Maximum permissible operating temperature 100°C Maximum permissible operating overpressure 10 bar- 818 x 500mm- Heating cartridge recommendation: Maximum 400 watts
Variants from €160.79*
Prod. no.:
BCE119050AT2M
BEMM Ceroc hot water bathroom radiators
- BEMM Ceroc, top bathroom radiator series BCE, for central heating (additional equipment with electric heating element) and for heating towels and textiles- The 70 x 11 mm cross tubes are inserted into the 70 x 30 mm circumferential tube frame- Generous towel gaps allow easy hanging of towels and textiles- With M connection DN15 (1/2) x 50 mm centered at the bottom and 2 connections DN15(1/2) from below, right and left outside, as well as 1 vent connection DN15(1/2) at the top behind the radiator- Environmentally friendly, emission-free powder-coated surface DIN 55900 and baked at approx. 180 degrees C- anthracite gray- Standard accessories: 2 vent plugs DN 15 (1/2) and 4 sturdy, easy-to-install fixings comply with AK3 in accordance with VDI 6036, with hexagonal wood screws and plugs- Complies with the guidelines of the statutory accident insurers (GUV), thermal performance in accordance with DIN EN 442-2- CE declaration of performance in accordance with EU-BauPVo- Heating medium water: maximum permissible operating temperature 100°C, maximum permissible operating overpressure 4 bar- 1190 x 500mm
Variants from €650.20*
Prod. no.:
BEA08104301E03M
BEMM Ares EK-M electric bathroom radiator
- Bemm Collection IRSAP Ares EK, complete electric bathroom radiator, BEA series, for all-electric operation incl- Heating element with medium temperature controller, for heating towels and textiles and for room heating- Horizontal round tubes 23 mm connected to vertical all-round smooth semi-oval tubes 30 x 40 mm using a special process- With 2 to 3 openings for towels- Filled with heat transfer fluid (frost protection down to -6°C)- Heating element including controller is fitted in the right-hand manifold as standard- By turning the radiator and rotating the controller, the radiator can also be installed with the heating element on the left- Unused connections are sealed watertight with blind plugs DN15(1/2) with hexagon socket- Heating element (ZENELM_) with thermal fuse and stainless steel immersion body with DN 15 (1/2) connection thread with O-ring- Thermostat with approx. 0.8 m connection cable and safety plug, mains voltage 230 V / 50 Hz, class I, IP44, with regulation of the medium temperature, setting range 20 °C to 65 °C (surface temperature approx. 18-50 °C), timer for 3 different boost functions (maximum heating power to 65 °C from the set target temperature), standby mode (i.e. without heating function), indicator light, housing and connection cable made of white plastic- Surface environmentally friendly, emission-free powder-coated DIN 55900 and baked at approx. 180 degrees C- White 9016 (standard)- Standard accessories: 3 wall fixings (AK 2-3 according to VDI 6036 depending on size), with screws and plugs- Complies with the guidelines of the statutory accident insurers (GUV)- Electrical power consumption/heat output 300 watts- Heat output 24 degrees room temperature 280 watts- 818 x 430mm
Prod. no.:
ZEXBFRTSW
BEMM Economy radio clock room thermostat
- Wireless room thermostat Economy, consisting of wireless room thermostat, analog, with on/off switch, setting range 5 - 35 degrees C, IP30 incl- 2 batteries type AAA 1.5 V, white housing, dimensions 83x80x27 mm (WxHxD)- In combination with radio receiver
Prod. no.:
BY1083050ATEUG
BEMM Asymo E electric bathroom radiator
- BEMM Asymo E, electric bathroom radiator series BY1-E, prepared for purely electric operation when fitted with one of the electric heating elements listed, for heating towels and textiles and for room heating- Straight horizontal round tubes 23 mm connected to the vertical round tubes 30 mm in an energy-saving, water-bearing manner using a special welding process- Asymo is reversible due to the symmetrical top/bottom arrangement of the cross pipes (long pipe ends on the right or left)- Vertical pipes at 50 mm intervals with DN 15 (1/2) x 50 mm connections at the top and bottom on one side- Pre-filled with heat transfer fluid and sealed watertight (frost protection down to -15°C)- Surface environmentally friendly, emission-free powder-coated to DIN 55900 and baked at approx. 180 degrees C- anthracite gray- Standard accessories: 4 stable, easy-to-install steel fixings (AK 4 according to VDI 6036), 3 hexagonal wood screws with dowels- Complies with the guidelines of the statutory accident insurers (GUV)- 831 x 500mm- For 400 watt heating rod (not included)
Variants from €669.72*
Prod. no.:
ZEPELO04
BEMM Electric heating rod series P with stranded wire
- P series electric immersion heater with stranded wire, heating element with PTC element, protection class IP55, class I, mains voltage 230 V, stainless steel immersion body with DN 15 (1/2) connection thread, O-ring and hexagon with approx. 1.0 m connection cable with stranded wire- For use as an individual room heater, add the required control unit (following pages) or on site (Smarthome)
Prod. no.:
BP2072050014M
BEMM Kart 2 Plus hot water bathroom radiator
- Bemm Collection IRSAP KART Plus 2, BP2 series, for central heating (additional equipment with electric heating element) and for heating towels and textiles- 2-row horizontal round tubes 23 mm connected to vertical round tubes 30 mm in a special water-bearing process- With 1 - 3 openings for towels- With M connection DN 15 (1/2) x 50 mm centered at the bottom and 2 connections DN 15 (1/2) from the bottom, right and left outside, as well as 1 vent connection DN 15 (1/2) from the top right- Environmentally friendly, emission-free powder-coated surface DIN 55900 and baked at approx. 180 degrees C- Model version white, other colors on request- Standard accessories: 1 vent valve DN 15 (1/2) and 2 blanking plugs DN 15 (1/2) with hexagon socket and 4 wall fixings (AK 3 according to VDI 6036) with screws and plugs- Complies with the guidelines of the statutory accident insurers (GUV) Thermal performance in accordance with DIN EN 442-2- CE declaration of performance according to EU-BauPVo- Heating medium water: maximum permissible operating temperature 95°C maximum permissible operating overpressure 8 bar- 725 x 500mm
Prod. no.:
BSX065100AT5
BEMM Rondo S hot water bathroom radiator
- BEMM Rondo S, bathroom radiator series BS, for central heating (and electric) and for heating towels and textiles- Horizontal round tubes 25 mm diameter- connected in a special process (without visible weld seams) with vertical square tubes 32 x 33 mm, with openings for towels (height 654 mm without opening)- The side connections are sealed watertight at the factory with elegant special plugs or vent plugs- Environmentally friendly, emission-free DIN 55900 powder-coated surface and baked at approx. 180 degrees C- anthracite gray- Standard accessories: 3 special blanking plugs DN 15 (1/2) with O-ring (fitted) and nickel-plated vent plug DN 15 (1/2) (fitted), 2 stable, easy-to-install fastenings made of die-cast aluminum, powder-coated in the same color as the radiator, depth-adjustable, 2 hexagonal wood screws, 2 dowels and 1 clamp bracket with spacer screw- CE declaration of performance according to EU-BauPVo Heating medium water maximum permissible operating temperature 100°C maximum permissible operating overpressure 10 bar- 654 x 1000mm- If a heating cartridge is used, the manufacturer recommends a maximum output of 700 watts
Variants from €526.65*
Prod. no.:
BEA08104801E03W
BEMM Ares EK-R electric bathroom radiator
- Bemm Ares EK-R, complete electric bathroom radiator, BEA-R series, for purely electric operation including heating element with room temperature controller, for heating towels and textiles and for room heating- Horizontal round tubes 23 mm connected to vertical all-round smooth semi-oval tubes 30 x 40 mm using a special process- With 2 to 3 openings for towels- Filled with heat transfer fluid (frost protection down to - 6 degrees C)- Heating element including controller is fitted in the right-hand manifold as standard- By turning the radiator and rotating the controller, the radiator can also be installed with the heating element on the left- Unused connections are sealed watertight with blind plugs DN15(1/2) with hexagon socket- Resistance heating element with thermal fuse and stainless steel immersion body with DN 15 (1/2) connection thread with O-ring- Thermostat with approx. 0.8 m connection cable and safety plug, mains voltage 230 V / 50 Hz, class II, IP44- Digital clock room thermostat with integrated infrared sensor for optionally available IR remote control, with 7 preset programs, individually programmable daily and weekly programs (chrono mode), comfort mode, night mode, frost protection mode, fil-pilote mode, timer for 2h, standby mode (i.e. without heating function) and open window function- Setting range 7 - 32 degrees C- Surface environmentally friendly, emission-free powder-coated DIN 55900 and baked at approx. 180 degrees C- White RAL 9016 (standard)- Standard accessories: 3 wall fixings with screws and plugs- Wall fixings comply with AK3 according to VDI 6036- Complies with the guidelines of the statutory accident insurers (GUV)- Electrical power consumption 300 watts- 818 x 480mm
Prod. no.:
BCH084050ATEUG
BEMM ChaCha E electric bathroom radiator
- BEMM ChaCha, bathroom radiator series BCH-E, prepared for purely electric operation when fitted with one of the electric heating elements listed, for heating towels and textiles and for room heating- Straight horizontal oval panel pipes 50 x 10 mm connected to the vertical round pipes 30 mm in an energy-saving, water-bearing manner using a special welding process- Horizontal pipes arranged regularly throughout with many gaps for hanging towels and textiles on the sides- Bathroom radiator can be turned upside down (either connections on the left and swings to the right or connections on the right and swings to the left)- Vertical pipes positioned 50 mm apart- Pre-filled with heat transfer fluid and sealed watertight (frost protection down to - 15 degrees C)- Environmentally friendly, emission-free DIN 55900 powder-coated surface and baked at approx. 180 degrees C- Standard color white 9016, optionally in other colors according to BEMM color palette- Standard accessories: 4 stable, easy-to-install fastenings made of steel comply with AK 4 in accordance with VDI 6036, with hexagonal wood screws and dowels- To be installed on site in accordance with the installation instructions, the electric heating rod must be ordered separately in the size and design specified in the factory price list- Complies with the guidelines of the statutory accident insurers (GUV), approved for schools and kindergartens- anthracite gray- 849 x 500mm- Suitable for 400 watt heating rod (not included)
Variants from €695.46*
Prod. no.:
BTR118050ATEUG
BEMM Triola electric bathroom radiator 1184 x 500mm
- BEMM Triola E, electric top bathroom radiator series BTR-E, prepared for pure electric operation when equipped with one of the available electric heating elements, for heating towels and textiles and for room heating- Straight horizontal oval panel tubes 70 x 11 mm connected to the vertical square tubes 40 x 40 mm in an energy-saving, water-bearing manner using a special welding process- Horizontal pipes arranged regularly throughout for hanging towels and textiles on the side- Bathroom radiator can be turned upside down (either connections on the left and horizontal pipes to the right or connections on the right and horizontal pipes to the left)- Vertical pipes positioned 50 mm apart for flow and return- Pre-filled with heat transfer fluid and sealed watertight (frost protection down to - 15 degrees C)- Environmentally friendly, emission-free DIN 55900 powder-coated surface and baked at approx. 180 degrees C- anthracite grey, optionally in a different color according to the BEMM color palette- Standard accessories: 4 sturdy, easy-to-install steel fixings comply with AK3 in accordance with VDI 6036, with hexagonal wood screws and dowels- Complies with the guidelines of the statutory accident insurers (GUV)
Variants from €796.42*
BEMM – designer radiators with style and efficiency
For decades, BEMM has stood for exclusive radiators that combine technology and design in a unique way. Whether in bathrooms, living areas or commercial buildings – radiators from BEMM set stylish accents and fulfil the highest standards of comfort, efficiency and aesthetics.
High-quality designer radiators for modern rooms
With a wide range of bathroom radiators, room radiators and special solutions, BEMM offers the right solution for almost every installation situation. What makes them special: The radiators not only impress with their high-performance technology, but also with their elegant, multi-award-winning design. Available in numerous colours, shapes and designs - also made to measure.
Ideal for low-temperature systems and heat pumps
Many BEMM models are perfectly matched to modern heating systems such as heat pumps or condensing boiler technology. Thanks to their high energy efficiency, they actively contribute to economical and sustainable heating behaviour. This makes BEMM radiators the ideal choice for future-orientated new buildings and energy-efficient renovations.
Innovation meets sustainability
As part of the European IRSAP Group, BEMM focuses on environmentally friendly production processes, durable materials and sustainable product development. New in the range: innovative hybrid radiators that both heat and cool – for a pleasant indoor climate all year round.
Customised solutions – Made in Germany
BEMM stands for quality ‘Made in Germany’. In addition to standard models, the brand also offers custom-made products, for example in individual sizes, with towel rails or in unusual colours. This means that radiators can be perfectly customised to suit your interior design and requirements.