- For drywall construction- For installation in part-high or room-high pre-wall installations- For installation in room-high installation walls- For installation in part-height or room-height Geberit Duofix system walls- For wall-mounted WCs with connection dimensions according to DIN EN 33:2011-11- For wall-mounted WCs with projection up to 62 cm- For 1-flush, 2-flush or flush-stop flushes- For floor build-ups 0-20 cm- For concealed mains connection behind WC ceramics- Flow pressure 10-1000 kPa- Maximum water temperature 25 °C- Flush volume Factory setting 6 and 3 l- Large flush volume Setting range 4 / 4.5 / 6 / 7.5 l- Small flush volume setting range 2-4 l- Calculation flow rate 0.11 l/s- Minimum flow pressure for calculation flow 50 kPa- Scope of delivery: water connection R 1/2", MF-capable, with integrated angle valve and handwheel, construction protection for service opening, 2 protective plugs, connection set for WC, ø 90 mm, connection bend 90° made of PE-HD, ø 90 mm, transition sleeve made of PE-HD, ø 90 / 110 mm, 2 threaded rods M12, electrical and communication connection box, empty pipe length 0.32 m, for connection Geberit AquaClean, construction protection for electrical and communication connection box- To be ordered additionally: Geberit power supply unit for electrical and communication junction box

- For drywall construction- For installation in part-high or room-high pre-wall installations- For installation in room-high installation walls- For wall-mounted WCs with connection dimensions according to DIN EN 33:2011-11- For wall-mounted WCs with projection up to 62 cm- For 1-flush, 2-flush or flush-stop flushes- For floor build-ups 0-20 cm- Self-supporting powder-coated frame- Frame open at top- Frame with drill holes ø 9 mm for fastening in wooden post and beam construction- Frame with mounting holes for Geberit Duofix wall anchors for elements with open top frame- Frame prepared for supports for WC ceramics with small contact surface- Footrests galvanized- Footrests adjustable 0-20 cm- Footplates made of plastic- Footplate depth suitable for installation in U-profiles UW 50- Connection bend can be mounted without tools- Flush-mounted cisterns with actuation from the front- Flush-mounted cistern with condensation water insulation- Immediate flushing possible with factory setting- Water connection at the back or at the top in the center- Equipped with empty pipe for water supply line for connection of Geberit AquaClean shower toilets- With mounting option for electrical connection- Scope of delivery: corner valve R 1/2", MF-capable, with adapter ring; construction protection for service opening, made of polystyrene foam; 2 spacer bolts; 2 wall anchors; connection set for WC, ø 90 mm; connection bend 90° made of PE-HD, ø 90 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; 2 protective plugs; cross bar for planking support; 2 threaded rods M12; fixing material

- Self-supporting powder-coated frame- Frame with 9 mm dia. drill holes for fastening in timber stud construction- Frame prepared for supports for WC ceramics with small support surface- Galvanized foot supports- Foot supports adjustable 0-20 cm- Foot supports with slip resistance- Foot plates rotatable- Foot plate depth suitable for installation in U profiles UW 50 and UW 75 and Geberit Duofix system rails- Connection elbow can be mounted in various depth positions without tools, adjustment range 45 mm- Soundproofed connection bend fixing- Concealed cisterns with actuation from the front- Concealed cistern insulated against condensation- Immediate rinsing possible with factory setting- Building protection for service opening protects against moisture and dirt- Building protection for service opening can be cut to length- With empty pipe for water supply line for connecting Geberit AquaClean shower toilets- Fastening option for electrical connection- Flushing programs selectable (time or interval)- Compatible with Geberit Control app- Device settings and operation with mobile device via integrated Bluetooth® interface- Function statistics can be called up via the Geberit Control app- Logs over 5000 flushing processes- Usage detection- Digital I/O interface- Potential-free fault display via digital I/O- Can be wired networked with Geberit Gateway via GEBUS converter- Connection to Geberit bus via converter- Built-in backflow sensor- Solenoid valve normally closed- One connection for cold water R 1/2", MF-capable, with blue protective cap, top- Power supply via external power supply unit or via bus converter with integrated power supply unit

- Glass/lava, side panel aluminum black chrome- For floor connections- For renovations, conversions and new buildings- For wall connections with a drain height of 18 cm- For replacing low-hanging AP cisterns- For replacing pedestal WCs with surface-mounted AP cisterns- For connecting Geberit AquaClean Sela, floor-standing WCs- For connecting Geberit AquaClean WC attachments, with accessories- For mounting on finished floors- For installation in front of drywall and solid walls- 2-quantity flush- Compensation of construction tolerances possible- Front cladding made of glass (ESG)- Cistern insulated against condensation water- Side cladding made of brushed aluminum- Self-supporting- Flush volume adjustable- Water connection on the side- Scope of delivery: water connection set with angle valve R 1/2"; flushing elbow extension 160 mm; sleeve made of EPDM, ø 44 / 55 mm; P-connection elbow made of PP, ø 90 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; plinth cover; fastening material for drywall; fastening material

- 525mm wide- 1120mm high- 135mm deep- for dry lining, installation in front of solid wall, in lightweight stud wall etc., adjustment range feet from unfinished floor to OKFFB: 0-200mm, depth adjustment front edge element:135-205mm (when using wall brackets)- 4 fixing points- incl. feet and fixing material, with construction protection for flushing pipe, mounting instructions, without actuator plate- EN 14055- single cardboard packaging- self-supporting, powder-coated steel frame construction, completely pre-assembled- actuation from the front- with small inspection opening, flush arch height adjustable, flush arch can be shortened, WC connection arch height adjustable, center of flush cistern actuator plate can be adjusted to operating heights suitable for children and infants by adjusting the height of the concealed cistern, condensation water-insulated concealed cistern with dual flush, flushing capacity set to 3/6 l, can be converted to 3/4.5 L, max. flushing volume 7.5 l, incl. flush volume 7.5 l, incl. flush volume 7.5 l, incl. flush volume 7.5 l, incl. flush volume 7.5 l, incl. flush volume 7.5 l. flush volume 7,5 L, incl. flush flow restrictor, filling valve fitting group I, 2-part angle valve connection set R1/2, drain bend clamp, PE-WC-connection bend DN 90° (d:90)/DN 100 (d:110) triple adjustable with building protection, building protection box for inspection opening can be shortened, flexible hose to filling valve can be screwed by hand, KIWA, test mark for concealed cistern: fitting group I- Consisting of: for dry construction, low height of actuator plate

- For masonry walls- For installation in partial or room-height pre-wall installations- For wall-mounted WCs with connection dimensions according to DIN EN 33:2011-11- For 1-flush, 2-flush or flush-stop flushes- Mounting frame galvanized- Mounting frame with four fixing lugs- Connection elbow can be mounted without tools- Mounting connection elbow can be mounted from the front without tools- UP cisterns with actuation from the front- Flush-mounted cistern with condensation water insulation- Immediate flushing possible with factory setting- Water connection at the back or at the top in the center- Connecting hose can be connected to corner valve without tools- Equipped with empty pipe for water supply line for connection of Geberit AquaClean shower toilets- With mounting option for electrical connection- Scope of delivery: angle valve R 1/2", MF-capable, with adapter ring; construction protection for service opening; 2 spacer bolts; connection elbow 90° made of PE-HD, ø 90 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; connection set for WC, ø 90 mm; 2 protective plugs; 2 threaded rods M12; fixing material

- Installation element- AQUAFIX- for wall-hung WC bowl- 450x1120 mm (WxH)- with fitted wall-mounted cistern with dual flush system- for individual installation for dry cladding

- For masonry walls- For installation in partially high pre-wall installations- For wall-mounted WCs with connection dimensions according to DIN EN 33:2011-11- For 2-flush system- Mounting frame powder coated- Mounting frame with four mounting brackets- Mounting depth adjustable, 12-20.5 cm- Connection elbow can be mounted without tools- Mounting connection elbow can be mounted from the front without tools- Flush-mounted cistern with actuation from above or from the front- Flush-mounted cistern with condensation water insulation- Immediate flushing possible with factory setting- Installation and maintenance work on the concealed cistern without tools- Water connection on the left side or left rear- Building protection for service opening protects against moisture and dirt- Construction protection for service opening can be cut to length- Equipped with empty pipe for water supply line for connection of Geberit AquaClean shower toilets- With mounting option for electrical connection- Scope of delivery: water connection R 1/2", MF-capable, with integrated angle valve and handwheel; construction protection for service opening; connection set for WC, ø 90 mm; connection elbow made of PE-HD, ø 90 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; 2 protective plugs; sound insulation set; 2 threaded rods M12; fixing material

- Self-supporting powder-coated frame- Frame with 9 mm dia. drill holes for fastening in timber stud construction- Frame prepared for supports for WC ceramics with small support surface- Galvanized foot supports- Foot supports adjustable 0-20 cm- Foot supports with slip resistance- Foot plates rotatable- Foot plate depth suitable for installation in U profiles UW 50 and UW 75 and Geberit Duofix system rails- Connection elbow can be mounted in various depth positions without tools, adjustment range 45 mm- Sound-insulated connection bend fixing- Concealed cisterns with actuation from the front- Concealed cistern insulated against condensation- Immediate rinsing possible with factory setting- Building protection for service opening protects against moisture and dirt- Building protection for service opening can be cut to length- With empty pipe for water supply line for connecting Geberit AquaClean shower toilets- Fastening option for electrical connection- Flushing programs selectable (time or interval)- Compatible with Geberit Control app- Device settings and operation with mobile device via integrated Bluetooth® interface- Function statistics can be called up via the Geberit Control app- Logs over 5000 flushing processes- Usage detection- Digital I/O interface- Potential-free fault display via digital I/O- Can be wired networked with Geberit Gateway via Geberit bus- Connection to Geberit bus directly or via converter- Compatible with Geberit Connect- External temperature sensor can be connected- Internal volume flow sensor can be connected- Built-in backflow sensor- Solenoid valve normally closed- One connection for cold water R 1/2", MF-capable, with blue protective cap, top- Power supply via external power supply unit or via bus converter with integrated power supply unit

- 2-quantity flushing- Compensation of construction tolerances possible- Height adjustable up to 7 cm- Cistern insulated against condensation- Brushed aluminum side cladding- Self-supporting- Soft-touch buttons for flush actuation- DALI-compatible control- Settings can only be changed with the Geberit Home app- With ComfortLight- Continuously adjustable lighting mood from orientation light to daylight- Interval flush adjustable- Adjustable detection range for user detection- Odor extraction with ceramic honeycomb filter can be activated- Odor extraction with run-on function- Ceramic honeycomb filter for odour neutralization can be replaced without tools- Mains connection with three-core flexible sheathed cable- Water connection on the side- Light color infinitely adjustable from warm white to cool white- Front cladding glass lava- Side panel aluminum black chrome

- TECEprofil WC module with Geberit Sigma cistern, installation height 1120 mm- WC module for attachment to TECEprofil profile pipes or for installation in metal or wooden stud walls and as a pre-wall or corner module also suitable for single block installation.- For Geberit flush plates Sigma 01/10/20/21/30/50/60/70/80.- Consisting of:- Geberit Sigma cistern for operation from the front:Cistern made of plastic- Cistern not pre-assembled- Cistern connection with 1/2" AG- 7.5 liter tank volume 6 liter preset standard flush volume 4.5 and 7.5 liter optionally adjustable at any time 3 liter partial flush volume with dual flush technology. Remaining volume can be used for immediate cleaning rinsing.- Insulated against condensation- Module consisting of:self-supporting mounting frame, powder-coated- Two retaining bolts with M 12 nuts- WC drain elbow DN 90 with transition adapter DN 90/100 made of PP- Transition adapter also suitable for horizontal installation- WC connection set DN 90, including building protection plug- Adjustment of a raised ceramic attachment for 48 cm seat height, possible in accordance with DIN 18040 (DIN 18040: Barrier-free building - Part 1: Publicly accessible buildings and workplaces).- Order no.: 9300011

- for front wall or stud wall mounting- 0,42m wide- for WCs with 70cm projection- with cistern 6 l- steel frame- completely pre-assembled- fixing material- TÜV-tested- 2 WC retaining bolts- ceramic mounting- screw spacing 180/230 mm- drain bend Ø 90 mm- depth adjustable- reducer Ø 90/110 mm- inlet and outlet fitting- pneumatic drain valve with two functions:2 quantities or start & stop- Fitting group I- condensation water insulated- water connection DN 15 with integrated angle valve and tool-free hose fitting- Wall bracket 38 558 00M for pre-wall installation must be ordered separately- for installation of folding support handles, please order additional retaining element 38 559 001

- Front cladding: stoneware slate look, side cladding aluminum black chrome- For floor connections- For renovations, conversions and new buildings- For wall connections with a drain height of 18 cm- For replacing low-hanging surface-mounted cisterns- For replacing pedestal WCs with surface-mounted AP cisterns- For connecting Geberit AquaClean Sela, floor-standing WCs- For connecting Geberit AquaClean WC attachments, with accessories- For mounting on finished floors- For installation in front of drywall and solid walls- 2-quantity flushing- Compensation of construction tolerances possible- Front cladding made of glass (ESG)- Cistern insulated against condensation water- Side cladding made of brushed aluminum- Self-supporting- Flush volume adjustable- Water connection on the side- Scope of delivery: water connection set with angle valve R 1/2"; flushing elbow extension 160 mm; sleeve made of EPDM, ø 44 / 55 mm; P-connection elbow made of PP, ø 90 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; plinth cover; fastening material for drywall; fastening material

- TECEbox WC module with Uni cistern, installation height 1060 mm- WC module including "easy fit" flush plate installation. For installation in a brick pre-wall in front of a solid wall.- Uni cistern for operation from the front:Safety tank made of impact-resistant plastic, tested to EN 14055- Cistern completely pre-assembled and sealed- Cistern connection with R 1/2" external thread on the side, compatible with quick-release adapters- 10 liter tank volume 6 liter preset standard flush volume 4.5/7.5/9 liter flush volume adjustable at any time 3 liter partial volume flush with dual-volume technology Remaining volume can be used for immediate cleaning flush.- Insulated against condensation- for TECE flush plates and WC fittings- Can be used as a single or dual-flush cistern- "easy fit" flush plate installation- Installation tunnel for service opening, can be shortened without tools- Low-noise hydraulic filling valve, fitting group 1 in accordance with DIN 4109- Module frame: Galvanized steel frame- Two retaining bolts and nuts M 12, fixing distance 180 or 230 mm- WC drain elbow DN 90 with transition adapter DN 90/100 made of PP- Transition adapter also suitable for horizontal installation- WC connection set DN 90, including building protection plug- Order no.: 9370300

- 2-quantity flushing- Compensation of construction tolerances possible- Height adjustable up to 7 cm- Cistern insulated against condensation- Brushed aluminum side cladding- Self-supporting- Soft-touch buttons for flush actuation- DALI-compatible control- Settings can only be changed with the Geberit Home app- With ComfortLight- Continuously adjustable lighting mood from orientation light to daylight- Interval flush adjustable- Adjustable detection range for user detection- Odor extraction with ceramic honeycomb filter can be activated- Odor extraction with run-on function- Ceramic honeycomb filter for odour neutralization can be replaced without tools- Mains connection with three-core flexible sheathed cable- Water connection on the side- Light color infinitely adjustable from warm white to cool white- Front cladding stoneware slate look- Aluminum side cladding

- For renovations, conversions and new buildings- Glass/lava, side cladding aluminum black chrome- For wall connections with drain height > 23 cm- For replacing low-hanging surface-mounted cisterns- For replacing wall-mounted WCs with surface-mounted AP cisterns- For Geberit AquaClean complete WC systems- For connecting Geberit AquaClean WC attachments, with accessories- For installation on finished floors- For mounting in front of drywall and solid walls- To compensate for misalignment between WC connections and wall drains via arranged connection pipe for wall-mounted WCs- 2-quantity flushing- Compensation of construction tolerances possible- Height adjustable up to 7 cm- Front cladding made of glass (ESG)- Fixing height WC ceramics 35 ± 1 cm- Cistern insulated against condensation water- Brushed aluminum side panel- Self-supporting- Flush volume adjustable- Water connection on the side- Scope of delivery: water connection set with angle valve R 1/2"; flush bow extension 160 mm; connection pipe made of PE-HD, ø 90 mm; sleeve made of EPDM, ø 44 / 55 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; 2 threaded rods M12; sound insulation set; plinth cover; fixing material for drywall; fixing material

- with Omega concealed cistern- For drywall construction- For installation in part-high or room-high pre-wall installations- For installation in room-high installation walls- For installation in part-height or room-height Geberit Duofix system walls- For wall-mounted WCs with connection dimensions according to DIN EN 33:2011-11- For wall-mounted WCs with projection up to 62 cm- For 2-flush system- For floor build-ups 0-20 cm- Self-supporting frame powder-coated- Frame with drill holes ø 9 mm for fastening in wooden post and beam construction- Frame prepared for supports for WC ceramics with small bearing surface- Footrests galvanized- footrests adjustable 0-20 cm- Footrests with anti-slip- Footplates rotatable- Footplate depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails- Connection bend can be mounted in various depth positions without tools, adjustment range 45 mm- Fastening of connection bend sound-insulated- concealed cistern with actuation from above or from the front- Flush-mounted cistern with condensation water insulation- Immediate flushing possible with factory setting- Installation and maintenance work on the concealed cistern without tools- Water connection on the left side or left rear- Building protection for service opening protects against moisture and dirt- Construction protection for service opening can be cut to length- Equipped with empty pipe for water supply line for connection of Geberit AquaClean shower toilets- With mounting option for electrical connection- Scope of delivery: water connection R 1/2", MF-capable, with integrated angle valveand handwheel; construction protection for service opening; connection set for WC, ø 90 mm; connection bend 90° made of PE-HD, ø 90 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; 2 protective plugs; 2 threaded rods M12; fixing material

- for free-standing, pre-wall or stud wall mounting- steel frame- completely pre-assembled- with height lock- fixing material- 2 WC retaining bolts- ceramic fixing- WCs with support surface < 205 mm require support set 38 779- screw spacing 180/230 mm- drain bend Ø 90 mm- depth adjustable- Reducer Ø 90/110 mm- Inlet and outlet fitting- cistern GD 2, 6 - 9 l- factory setting 6l and 3l- pneumatic drain valve with two functions: 2 quantities or start & stop- water connection from left/right/rear- faucet group I- condensation water insulated- water connection DN 15 with integrated angle valve and tool-free hose fitting- toolless mountable inspection shaft with rough-in protection- Wall bracket 38 558 00M for pre-wall installation must be ordered separately- Inspection chamber 40 911 000 for small cover plates must be ordered separately

- For dry installation- Large flush water volume: 6 liters- Minimum flush water requirement of just 2 liters- Individually adjustable flush volume- Partially pre-assembled- Water-saving dual flush: small or large flush volume can be selected as required (dual flush)

- pre-assembled WC element for wall-mounted WC- 500 x 1148mm- hygienic flush integrated,self-supporting, for drywall installation, suitable for planking with plasterboard, powder-coated frame, for WC ceramics with a projection of <= 625 mm, height-adjustable feet 0-240 mm, SensoWash preparation, electronic actuation from the front, Flats for optimum access of pressing tools, meter mark and center mark, tool-free installation of transparent revision protection plate, meets sound insulation requirements according to DIN 4109 and VDI 4100 (in combination with sound insulation set # WD6015 000 000)- Flushing cistern: flushing cistern CE tested according to EN 14055, maximum flushing volume 9l, filling level marking, 2-flush technology, adjustable flushing volumes, condensation water insulated, throttle to regulate the flushing current- Scope of delivery: rough-in set incl. flush-mounted power supply 100-240 V AC /24 V DC, PE wall-mounted WC drain bend DN 90/90, PE wall-mounted WC connection set DN 90, wall-mounted WC fastening set M12, installation accessories for lightweight stand construction, installation accessories for individual installation, PE wall-mounted WC reduction DN 90/110 for drain bend, 2 cover caps

- TECEprofil WC module with Uni cistern, for TOTO Neorest Washlet (WC) AC 2.0/EW 2.0, installation height 1120 mm- WC module including "easy fit" flush plate mounting. For attachment to TECEprofil profile pipes or for installation in metal or wooden stud walls and as a pre-wall or corner module also suitable for single block installation.- Uni cistern for operation from the front: safety tank made of impact-resistant plastic, tested in accordance with EN 14055- Cistern completely pre-assembled and sealed- Cistern connection with R 1/2" external thread on the side, compatible with quick adapters- 10 liter tank volume 6 liter preset standard flush volume 4.5/7.5/9 liter flush volume adjustable at any time 3 liter partial volume flush with dual-volume technology Remaining volume can be used for immediate cleaning flush.- Insulated against condensation- for TECE flush plates and WC fittings- Can be used as a single or dual-flush cistern- "easy fit" flush plate installation- Installation tunnel for service opening, can be shortened without tools- Low-noise hydraulic filling valve, fitting group 1 in accordance with DIN 4109- Module frame: self-supporting, powder-coated- Two retaining bolts and nuts M 12- WC drain elbow DN 90 with transition adapter DN 90/100 made of PP- Transition adapter also suitable for horizontal installation- WC connection set DN 90, including building protection plug- pre-assembled control cable for automatic flush activation with the TOTO Neorest Washlet (WC) AC 2.0/EW 2.0- Pre-assembled cavity wall appliance box for the power connection of the shower toilet- Pre-assembled retaining plate for water connection of the shower toilet- 1/2" x 1/2" wall plate including sound insulation- Four depth-adjustable wall fixings- Adjustment of a raised ceramic mounting for 48 cm seat height possible in accordance with DIN 18040 (DIN 18040: Barrier-free construction - Part 1: Publicly accessible buildings and workplaces).- Order no.: 9300344

- Front cladding: stoneware slate look, side cladding aluminum black chrome- For floor connections- For renovations, conversions and new buildings- For wall connections with a drain height of 18 cm- For replacing pedestal WCs with concealed cistern with maximum service opening height < 109 cm- For replacing low-hanging surface-mounted cisterns- For replacing semi-high-hanging surface-mounted cisterns- For replacing pedestal WCs with surface-mounted AP cisterns- For connecting Geberit AquaClean Sela, floor-standing WCs- For connecting Geberit AquaClean WC attachments, with accessories- For replacing flush valves- For mounting on finished floors- For installation in front of drywall and solid walls- 2-quantity flushing- Compensation of construction tolerances possible- Front cladding made of glass (ESG)- Cistern insulated against condensation water- Side cladding made of brushed aluminum- Self-supporting- Flush volume adjustable- Central rear water connection- Water connection on the side possible with accessories- Water connection at the bottom- Scope of delivery: water connection set with 2 corner valves 1/2"; flushing elbow extension 160 mm; P-connection elbow made of PP, ø 90 mm; sleeve made of EPDM, ø 44 / 55 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; fastening material; plinth cover; fastening material for dry-wall construction

- 2-quantity flushing- Compensation of construction tolerances possible- Height adjustable up to 7 cm- Cistern insulated against condensation- Brushed aluminum side cladding- Self-supporting- Soft-touch buttons for flush actuation- DALI-compatible control- Settings can only be changed with the Geberit Home app- With ComfortLight- Continuously adjustable lighting mood from orientation light to daylight- Interval flush adjustable- Adjustable detection range for user detection- Odor extraction with ceramic honeycomb filter can be activated- Odor extraction with run-on function- Ceramic honeycomb filter for odour neutralization can be replaced without tools- Mains connection with three-core flexible sheathed cable- Water connection on the side- Light color infinitely adjustable from warm white to cool white- Front cladding stoneware slate look- Aluminum side cladding

- For renovations, conversions and new buildings- Glass/lava, side cladding aluminum black chrome- For wall connections with drain height > 23 cm- For renovations, conversions and new buildings- For wall connections with drain height > 23 cm- For replacing low-hung surface-mounted cisterns- For replacing semi-high-hanging surface-mounted cisterns- For replacing wall-mounted WCs with surface-mounted AP cisterns- For replacing wall-mounted WCs with flush valve- For replacing wall-mounted WCs with concealed cistern with maximum service opening height < 109 cm- For Geberit AquaClean complete WC systems- For connecting Geberit AquaClean WC attachments, with accessories- For mounting on finished floors- For mounting in front of drywall and solid walls- To compensate for misalignment between WC connections and wall drains via arranged connection pipe for wall-mounted WCs- 2-quantity flushing- Compensation of construction tolerances possible- Height adjustable up to 7 cm- Front cladding made of glass (ESG)- Mounting height of WC ceramics 35 ± 1 cm- Cistern insulated against condensation water- Brushed aluminum side panel- Self-supporting- Flush volume adjustable- Central water connection at rear- Water connection on the side possible with accessories- Water connection at the bottom- Scope of delivery: water connection set with 2 corner valves 1/2"; flushing elbow extension 160 mm; sleeve made of EPDM, ø 44 / 55 mm; connection piece made of PE-HD, ø 90 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; 2 threaded rods M12; sound insulation set; plinth cover; fixing material for drywall; fixing material

- Model 922475- Width 525 mm- Height 820 mm- Depth 155 mm- Weight 10,8 kg- WC element- for dry construction, low, height 820mm- for dry lining, installation in front of solid wall, in lightweight stud wall etc., adjustment range feet from unfinished floor to OKFFB: 0-200mm, depth adjustment front edge element:155-205mm (when using wall brackets)- 4 fixing points- with wall bracket, incl. feet and fixing material, with construction protection for flush pipe, 2 WC retaining bolts M12 adjustable 180/230mm with construction protection and nuts, mounting instructions- without actuator plate- EN 14055- Single cardboard packaging- Can be combined with: for wall-mounted WC- self-supporting, powder-coated steel frame construction, completely pre-assembled, actuation from front/topactuation from front/top, transmission of button function via flexible cable technology to drain set; connection to actuation plate via turn-click connection- condensation water insulated concealed cistern with 2 flush volumes 3/6L, convertible to 3/4.5L, max. flush volume 4/9L, filling valve fitting group I, flexible hose to the filling valve can be screwed by hand, 2-part angle valve connection set R1/2, fastening clamp 4-fold adjustable, building protection box for inspection opening can be shortened, WC connection bend 90° DN90 (Ø90) / with transition sleeve DN90 (Ø90) / DN110 (Ø110) with building protection, WC connection set DN90 (Ø90) / 180mm complete, test mark for concealed cistern: fitting group I

- 2-quantity flushing- Compensation of construction tolerances possible- Height adjustable up to 7 cm- Cistern insulated against condensation- Brushed aluminum side cladding- Self-supporting- Soft-touch buttons for flush actuation- DALI-compatible control- Settings can only be changed with the Geberit Home app- With ComfortLight- Continuously adjustable lighting mood from orientation light to daylight- Interval flush adjustable- Adjustable detection range for user detection- Odor extraction with ceramic honeycomb filter can be activated- Odor extraction with run-on function- Ceramic honeycomb filter for odour neutralization can be replaced without tools- Mains connection with three-core flexible sheathed cable- Water connection on the side- Light color infinitely adjustable from warm white to cool white- Front cladding stoneware slate look- Aluminum side cladding

- TECEprofil WC module with Uni cistern, with integrated hygienic flush function hot and cold water, installation height 1120 mm- WC module including "easy fit" flush plate mounting. For mounting on TECEprofil profile pipes or for installation in metal or wooden stud walls and as a pre-wall or corner module also suitable for single block installation.- Uni cistern for operation from the front: cistern with integrated hygienic flush- Completely pre-installed cistern unit with hygienic flush function- Multi-way shut-off valves with function for flushing the pipes before commissioning- two cistern connections with external thread R 1/2" at the top, for flushing hot and cold water pipes (2 x cold water possible), compatible with quick adapters- Safety tank made of impact-resistant plastic, tested in accordance with EN 14055- Cistern completely pre-assembled and sealed- 10 liter tank volume 6 liter preset standard flush volume 4.5/7.5/9 liter flush volume adjustable at any time 3 liter partial volume flush with dual-volume technology Remaining volume can be used for immediate cleaning flush.- Insulated against condensation- for TECE flush plates and WC fittings- Can be used as a single or dual-flush cistern- "easy fit" flush plate installation- Installation tunnel for service opening, can be shortened without tools- Low-noise hydraulic filling valve, fitting group 1 in accordance with DIN 4109- Mains connection with transformer including connection cable- Fill level sensor, protects against backflow in the cistern- Operation:via Bluetooth interface via - TECE Smartflow app- optionally via BMS interface- Infinitely variable setting of flush intervals and flush volume- Setting the flush days and flush volume- Logging of the flush history- Module frame: self-supporting, powder-coated- Two retaining bolts and nuts M 12- WC drain elbow DN 90 with transition adapter DN 90/100 made of PP- Transition adapter also suitable for horizontal installation- WC connection set DN 90- WC connection box including pipework protection, with junction box and cover for transformer- Adjustment of raised ceramic fixing for 48 cm seat height possible in accordance with DIN 18040 (DIN 18040: Barrier-free building - Part 1: Publicly accessible buildings and workplaces).- Order no.: 9300102

- 2-quantity flushing- Compensation of construction tolerances possible- Height adjustable up to 7 cm- Cistern insulated against condensation- Brushed aluminum side cladding- Self-supporting- Soft-touch buttons for flush actuation- DALI-compatible control- Settings can only be changed with the Geberit Home app- With ComfortLight- Continuously adjustable lighting mood from orientation light to daylight- Interval flush adjustable- Adjustable detection range for user detection- Odor extraction with ceramic honeycomb filter can be activated- Odor extraction with run-on function- Ceramic honeycomb filter for odour neutralization can be replaced without tools- Mains connection with three-core flexible sheathed cable- Water connection on the side- Light color infinitely adjustable from warm white to cool white- Front cladding glass lava- Side panel aluminum black chrome

- with Omega concealed cistern- For drywall construction- For installation in partial-height pre-wall installations- For installation in partially high Geberit Duofix system walls- For wall-mounted WCs with connection dimensions according to DIN EN 33:2011-11- For wall-mounted WCs with projection up to 62 cm- For 2-flush system- For floor build-ups 0-20 cm- Self-supporting frame powder-coated- Frame with drill holes ø 9 mm for fastening in wooden post and beam construction- Frame prepared for supports for WC ceramics with small bearing surface- Footrests galvanized- footrests adjustable 0-20 cm- Footrests with anti-slip- Footplates rotatable- Footplate depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails- Connection bend can be mounted in various depth positions without tools, adjustment range 45 mm- Fastening of connection bend sound-insulated- concealed cistern with actuation from above or from the front- Flush-mounted cistern with condensation water insulation- With factory setting immediate flushing possible- Installation and maintenance work on the concealed cistern without tools- Water connection on the left side or left rear- Building protection for service opening protects against moisture and dirt- Construction protection for service opening can be cut to length- Equipped with empty pipe for water supply line for connection of Geberit AquaClean shower toilets- With mounting option for electrical connection- Scope of delivery: water connection R 1/2", MF-capable, with integrated angle valveand handwheel; construction protection for service opening; connection set for WC, ø 90 mm; connection bend 90° made of PE-HD, ø 90 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; 2 protective plugs; 2 threaded rods M12; fixing material

- For drywall construction- For installation in part-high or room-high pre-wall installations- For installation in room-high installation walls- For installation in part-height or room-height Geberit Duofix system walls- For children's and infants' stand-alone toilets- For 1-flush, 2-flush or flush-stop flushes- For floor build-ups 0-20 cm- Self-supporting frame powder coated- Frame with drill holes ø 9 mm for fastening in wooden post and beam construction- Footrests galvanized- Footrests adjustable 0-20 cm- Footrests with anti-slip- Footplate depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails- Height-adjustable crossbar for sink bow- concealed cisterns with actuation from the front- Flush-mounted cistern with condensation water insulation- Immediate flushing possible with factory setting- Pre-assembled back-up insert (specified flush volumes without back-up insert)- Assembly and maintenance work on the concealed cistern without tools- Water connection at the back or top center- Building protection for service opening protects against moisture and dirt- Construction protection for service opening can be cut to length- Flushing bend plugged in- Scope of delivery: water connection R 1/2", MF-capable, with integrated angle valve and handwheel; construction protection for service opening; 2 protective plugs; pipe clamp; connection bend 90° made of PE-HD, ø 90 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; connection set for floor-standing WC, white; fixing material

- for front wall or stud wall mounting- steel frame- completely pre-assembled- with quick adjustment and height lock- fixing material- TÜV-tested- 2 WC retaining bolts- ceramic fixing- WCs with support surface < 205 mm require support set 38 779- screw spacing 180/230 mm- drain bend Ø 90 mm- depth adjustable- Reducer Ø 90/110 mm- Inlet and outlet fitting- cistern GD 2, 6 - 9 l- factory setting 6l and 3l- pneumatic drain valve with two functions: 2 quantities or start & stop- water connection from left/right/rear- faucet group I- condensation water insulated- water connection DN 15 with integrated angle valve and tool-free hose fitting- toolless mountable inspection shaft with rough-in protection- with wall brackets 38 558 00M for pre-wall installation- Inspection chamber 40 911 000 for small cover plates to be ordered separately

- barrier-free- For fastening support and grab rails- For installation in part-high or room-high pre-wall installations- For installation in room-high installation walls- For installation in part-height or room-height Geberit Duofix system walls- For installation in Geberit GIS support systems for pre-wall- For wall-mounted WCs with mounting distance 18 cm- Suitable for barrier-free construction- For wall-mounted WCs with connection dimensions according to DIN EN 33:2011-11- For wall-mounted WCs with projection up to 70 cm- For 1-flush, 2-flush or flush-stop flushes- For floor build-ups 0-20 cm- Self-supporting frame powder coated- Frame prepared for supports for WC ceramics with small contact surface- WC ceramics in the finished bathroom can be subsequently adjusted in height, 41-49 cm from the finished floor- Galvanized footrests- Footrests adjustable 0-20 cm- Footrests with anti-slip- footplates rotatable- Footplate depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails- Extendable connection bend- Connection bend can be mounted vertically and horizontally on the element- Fixing of connection pipe sound-insulated- Flush-mounted cisterns with actuation from the front- Flush-mounted cistern with condensation water insulation- With factory setting immediate flushing possible- Installation and maintenance work on the concealed cistern without tools- Water connection at the back or top center- Building protection for service opening protects against moisture and dirt- Construction protection for service opening can be cut to length- Equipped with empty pipe for water supply line for connection of Geberit AquaClean shower toilets- With mounting option for electrical connection- Scope of delivery: water connection R 1/2", MF-capable, with integrated angle valve and handwheel; construction protection for service opening; connection set for WC, ø 90 mm; connection pipe made of PE-HD, ø 90 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; 2 threaded rods M12; construction protection for adjustment range of flushing elbow and connection elbow; flush-mounted box for drill hole ø 68 mm, for electrical connection

- 2-quantity flushing- Compensation of construction tolerances possible- Height adjustable up to 7 cm- Cistern insulated against condensation- Brushed aluminum side cladding- Self-supporting- Soft-touch buttons for flush actuation- DALI-compatible control- Settings can only be changed with the Geberit Home app- With ComfortLight- Continuously adjustable lighting mood from orientation light to daylight- Interval flush adjustable- Adjustable detection range for user detection- Odor extraction with ceramic honeycomb filter can be activated- Odor extraction with run-on function- Ceramic honeycomb filter for odour neutralization can be replaced without tools- Mains connection with three-core flexible sheathed cable- Water connection on the side- Light color infinitely adjustable from warm white to cool white- Front cladding glass lava- Side panel aluminum black chrome

- TECEprofil WC module with uni cistern, with connection for odor extraction, installation height 1120 mm- Toilet module including "easy fit" actuator plate mounting and empty pipe for connecting electronic shower toilets. For mounting on TECEprofil profile pipes or for installation in metal or wooden post-and-beam walls and as a pre-wall or corner module; also suitable for single-block installation.- Uni cistern for operation from the front:- Safety tank made of impact-resistant plastic, tested according to EN 14055.- Cistern completely pre-assembled and sealed- Cistern connection with external thread R 1/2" on the side, compatible with quick adapters- 10 liters tank volume; 6 liters preset standard flush volume; 4.5/7.5/9 liters flush volume adjustable at any time; 3 liters partial volume flush with dual volume technique; residual volume can be used for immediate cleaning flush- condensation water insulated- for TECE actuating plates and WC fitting- Can be used as a single-flush or dual-flush cistern- "easy fit" actuator plate installation- installation tunnel for service opening, can be shortened without tools- low-noise hydraulic filling valve, valve group 1 according to DIN 4109- connection for odor extraction (DN 70), suitable fans e.g. Maico ER 100- self-supporting, powder-coated- two retaining bolts and nuts M 12- WC drain bend DN 90 with transition adapter DN 90/100 made of PP- transition adapter also suitable for horizontal installation- WC connection set DN 90- Empty pipe for universal shower-toilet water connection (check connection position)- Raw construction protection for shower-toilet connection, including empty socket for transformer

- consisting of: Rapid SL element for WC (38 528 001); Skate Air actuator, alpine white, vertical mounting (38 505 SH0); Rapid SL wall bracket (38 558 00M)

- Cistern GD 2, 6 - 9 l- consisting of: Rapid SL element for WC (38 528 001); Arena Cosmopolitan S cover plate, chrome (37 624 000); Rapid SL wall bracket (38 558 00M)- including small inspection shaft 40 911 000 for mounting the small cover plate

- consisting of: Rapid SL element for WC (38 528 001); Skate Cosmopolitan actuator, chrome-plated (38 732 000); GROHE Fresh conversion set (38 796 000); Rapid SL wall bracket (38 558 00M); with WC sound insulation set (37 131 000).

- with Omega concealed cistern- For drywall construction- For installation in partial-height pre-wall installations- For installation in partially high Geberit Duofix system walls- For wall-mounted WCs with connection dimensions according to DIN EN 33:2011-11- For wall-mounted WCs with projection up to 62 cm- For 2-flush system- For floor build-ups 0-20 cm- Self-supporting frame powder-coated- Frame with drill holes ø 9 mm for fastening in wooden post and beam construction- Frame prepared for supports for WC ceramics with small bearing surface- Footrests galvanized- footrests adjustable 0-20 cm- Footrests with anti-slip- Footplates rotatable- Footplate depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails- Connection bend can be mounted in various depth positions without tools, adjustment range 45 mm- Fastening of connection bend sound-insulated- concealed cistern with actuation from above or from the front- Flush-mounted cistern with condensation water insulation- With factory setting immediate flushing possible- Installation and maintenance work on the concealed cistern without tools- Water connection on the left side or left rear- Building protection for service opening protects against moisture and dirt- Construction protection for service opening can be cut to length- Equipped with empty pipe for water supply line for connection of Geberit AquaClean shower toilets- With mounting option for electrical connection- Scope of delivery: water connection R 1/2", MF-capable, with integrated angle valveand handwheel; construction protection for service opening; connection set for WC, ø 90 mm; connection bend 90° made of PE-HD, ø 90 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; 2 protective plugs; 2 threaded rods M12; fixing material

- 2-quantity flushing- Compensation of construction tolerances possible- Height adjustable up to 7 cm- Cistern insulated against condensation- Brushed aluminum side cladding- Self-supporting- Soft-touch buttons for flush actuation- DALI-compatible control- Settings can only be changed with the Geberit Home app- With ComfortLight- Continuously adjustable lighting mood from orientation light to daylight- Interval flush adjustable- Adjustable detection range for user detection- Odor extraction with ceramic honeycomb filter can be activated- Odor extraction with run-on function- Ceramic honeycomb filter for odour neutralization can be replaced without tools- Mains connection with three-core flexible sheathed cable- Water connection on the side- Light color infinitely adjustable from warm white to cool white- Front cladding glass lava- Side panel aluminum black chrome

- Drywall element for fastening to TECEprofil profile pipes or for installation in metal or wooden stud walls and as a pre-wall or corner module.- For TECElux actuator glass plate and WC glass plate (to be ordered separately).- Completely pre-assembled unit, consisting of:- TECE-UP cistern:- Safety tank made of impact-resistant plastic.- Cistern completely pre-assembled and sealed- Angle valve and cistern connection pre-assembled- Cistern connection with 1/2" internal thread- 10 liters tank volume, 6 liters preset standard flush volume, 9/7.5/4.5 liters flush volume can be optimally adjusted at any time, 3 liters partial volume flush with dual volume technology. Residual volume can be used for immediate cleaning rinse.- condensation water insulated- according to DIN EN 14055- Fitting group 1 according to DIN 4109- low-noise hydraulic filling valve- Including insertion chute for cleaning rods. Enables the addition of cleaning rods to the cistern for a fresh WC flush.- Module:- self-supporting mounting frame with powder-coated surface- depth-adjustable support for upper actuator glass plate and lower WC glass plate- two adjustable foot supports for a floor build-up of 0-200 mm- two retaining bolts and nuts M 12- receptacle for WC ceramics with distance 180 mm- WC drain bend DN 90 with transition piece DN 90/100, material PP- transition piece also suitable for horizontal installation- WC connection set DN 90, including safety construction protection plug- large rough construction protection- suitable for wall constructions up to 45 mm- dimensions (H x W x D): 1120 x 500 x 160 mmH1: TECElux toilet module 100 with concealed cisternThe TECElux toilet module 100 is equipped with an innovative modular system that offers a wide range of customization options for almost any toilet ceramic. The individually selectable options ensure maximum convenience and modern aesthetics in your feel-good bathroom.H2: Flexible and intelligent: TECElux pre-wall WC moduleThe TECElux pre-wall WC module has an extremely flexible design and features a concealed cistern that is invisible and easily accessible from the outside. TECElux combines a high level of functionality with an intelligent and modern design. The pre-assembled connections for water and electricity allow water pipes and cables to be routed inconspicuously in the wall. The cistern is equipped with tried-and-tested dual flush technology and can be operated both manually with push buttons and electronically with flush sensors. If you opt for the electronic "sen-Touch" version, you can retrofit the unit with the "ceramic-Air" air filter system.H2: The TECElux modular systemThe TECElux terminal is based on a flexible modular system consisting of three individually combinable components. In the first step, you select the right module for your needs from various equipment variants of the TECElux toilet module with cistern. You can then choose from modern glass flush plates that can be operated mechanically or electronically. The toilet mounting plate is the third component of the terminal.H2: Design your individual TECElux WC moduleThe third component sets the TECElux WC module apart from other modules, as it offers numerous options for individual design. The toilet mounting plates are available individually and can be combined with almost any toilet ceramics. For example, you can combine the discreet WC cistern with a comfortable and hygienic TECEone shower toilet. The timeless design of the flush plates is available in black and white. For the flush buttons, you can choose between the colors white, black, chrome and the "sen-Touch" version in black or white. In this way, you can design your own individual WC module that fits perfectly into your feel-good bathroom.

- barrier-free- For fastening support and grab rails- For installation in part-high or room-high pre-wall installations- For installation in room-high installation walls- For installation in part-height or room-height Geberit Duofix system walls- Suitable for barrier-free construction- For wall-mounted WCs with connection dimensions according to DIN EN 33:2011-11- For wall-mounted WCs with projection up to 70 cm- For 1-flush, 2-flush or flush-stop flushes- For floor build-ups 0-20 cm- Self-supporting frame powder coated- Frame prepared for supports for WC ceramics with small contact surface- Frame width reduced for placement of support and grab bars next to the element- Mounting height WC adjustable in the carcass phase, 41-46 cm- Galvanized footrests- footrests adjustable 0-20 cm- Footrests with anti-slip- Footplates rotatable- Footplate depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails- Connection pipe can be mounted in various depth positions without tools, adjustment range 45mm- Fixing of connection pipe sound-insulated- concealed cisterns with actuation from the front- Flush-mounted cistern with condensation water insulation- With factory setting immediate flushing possible- Installation and maintenance work on the concealed cistern without tools- Water connection at the back or top center- Building protection for service opening protects against moisture and dirt- Construction protection for service opening can be cut to length- Equipped with empty pipe for water supply line for connection of Geberit AquaClean shower toilets- With mounting option for electrical connection- Scope of delivery: water connection R 1/2", MF-capable, with integrated angle valve and handwheel; construction protection for service opening; connection set for WC, ø 90 mm; connection pipe made of PE-HD, ø 90 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; 2 protective plugs; 4 wall anchors; 2 threaded rods M12; flush-mounted box for drill hole ø 68 mm, for electrical connection; fixing material- Scope of delivery: angle valve R 1/2", MF-capable, with adapter ring- Building protection for service opening, made of polystyrene foam- 2 distance bolts- 2 wall anchors- Connection set for WC, ø 90 mm- Connection bend 90° made of PE-HD, ø 90 mm- transition sleeve made of PE-HD, ø 90 / 110 mm- 2 protective plugs- Cross bar for planking support- 2 threaded rods M12- fixing material

- Intended use: For installation in partial-height or room-height pre-wall installations, For installation in room-height installation walls, For installation in partial-height or room-height Geberit Duofix system walls, For wall-mounted WCs with connection dimensions to DIN EN 33:2011-11, For wall-mounted WCs with projection up to 62 cm, For 1-flush, 2-flush or flush-stop flushing, For floor structures 0-20 cm, To prevent stagnation in drinking water pipes- For hygienic flushing with one water connection without interfaces- Scope of delivery: Building protection for service opening, Connection set for WC, ø 90 mm, Connection bend 90° made of PE-HD, ø 90 mm, 2 protective plugs, 2 threaded rods M12, Transition sleeve made of PE-HD, ø 90 / 110 mm, Solenoid valve unit with safety pin and flow limiter, Power supply unit 230 V / 12 V / 50 Hz with output cable length 5 m, Control unit, Mounting material

- pre-assembled WC element for wall-mounted WC- 500 x 1148mm- self-supporting, for drywall installation, suitable for planking with plasterboard, powder-coated frame, for WC ceramics with a projection of <= 625 mm, height-adjustable feet 0-240 mm, SensoWash preparation, mechanical operation from the front, Flats for optimal access of pressing tools, meter mark and center mark, tool-free installation of transparent revision protection plate, fulfills sound insulation requirements according to DIN 4109 and VDI 4100 (in combination with sound insulation set # WD6015 000 000)- Flushing cistern: flushing cistern CE tested according to EN 14055, maximum flushing volume 9l, filling level marking, 2-flush technology, adjustable flushing volumes, condensation water insulated, throttle to regulate the flushing current- Scope of delivery: PE wall-hung WC drain bend DN 90/90, PE wall-hung WC connection set DN 90, wall-hung WC fastening set M12, installation accessories for lightweight stand construction, installation accessories for individual installation, PE wall-hung WC reduction DN 90/110 for drain bend, 2 cover caps

- Glass/lava, side panel aluminum black chrome- For floor connections- For renovations, conversions and new buildings- For wall connections with a drain height of 18 cm- For replacing pedestal WCs with concealed cistern with maximum service opening height < 109 cm- For replacing low-hanging surface-mounted cisterns- For replacing semi-high-hanging surface-mounted cisterns- For replacing pedestal WCs with surface-mounted AP cisterns- For connecting Geberit AquaClean Sela, floor-standing WCs- For connecting Geberit AquaClean WC attachments, with accessories- For replacing flush valves- For mounting on finished floors- For installation in front of drywall and solid walls- 2-quantity flushing- Compensation of construction tolerances possible- Front cladding made of glass (ESG)- Cistern insulated against condensation water- Side cladding made of brushed aluminum- Self-supporting- Flush volume adjustable- Central rear water connection- Water connection on the side possible with accessories- Water connection at the bottom- Scope of delivery: water connection set with 2 corner valves 1/2"; flushing elbow extension 160 mm; P-connection elbow made of PP, ø 90 mm; sleeve made of EPDM, ø 44 / 55 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; fastening material; plinth cover; fastening material for dry-wall construction

- 1.13 m overall height- for front wall or stud wall mounting- steel frame- fixing material- washbasin retaining bolt M10, with ceramic fastener- screw spacing variable- HT drain bend Ø 50 mm- seal Ø 32 mm- 2 sound-insulated fitting connections DN 15- Wall bracket 38 558 00M for pre-wall installation must be ordered separately