Alape X.plicit
The basins in the Alape X.plicit series are characterised by a rectangular recess and make a clear statement about purist design. In addition to built-in and countertop basins, the series also includes beautifully shaped washbasins. The latter appear very light due to the low basin height.
Prod. no.:
3208000000
Alape AB.RE700.4 Countertop basin x.plicit 700 x 398mm, without tap hole, without overflow
- rectangular- Surface: White, ProShield (On the already non-porous and thus particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- Dimensions: 700 x 398 mm- Height 75 mm- trough depth 65 mm- glazed- without tap hole and without overflow- including stem valve with white glazed cover cap- inclusive mounting set- Fitting note: optimum impact area approx. 105 - 140mm from rear edge of basin
Variants from €468.60*
Prod. no.:
2207000000
Alape EB.RE700.4 Built-in basin X.plicit 700 x 398mm without tap hole, without overflow
- rectangular- Surface: White, ProShield (On the already pore-free and thus particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- Dimensions: 700 x 398 mm- trough depth 65 mm- glazed inside and outside (glaze has the same acid resistance as glass, so only hydrofluoric acid could damage the surface. In addition, the glaze can withstand temperature differences from -60 to +450 degrees Celcius. Thanks to the glaze, the washbasins are also resistant to impact, scratches and abrasion, and are considered to be colorfast and light-resistant without discoloration)- for installation from above and below- cut-out size above 665 x 363 mm- cut-out size below according to template- without tap hole- without overflow- including stem valve with white glazed cover cap- inclusive mounting set- Fitting note: optimum impact area approx. 105 - 140mm from rear edge of basin
Prod. no.:
2208000000
Alape EB.RE700H.2 Built-in basin X.plicit 700 x 460mm with tap hole, without overflow
- rectangular- Surface: White, ProShield (On the already pore-free and thus particularly hygienic surface of the glazed steel, bacteria and fungi hardly stand a chance thanks to "ProShield")- Material: glazed steel- Dimensions: 700 x 460 mm- trough depth 65 mm- glazed inside and outside (glaze has the same acid resistance as glass, so only hydrofluoric acid could damage the surface. In addition, the glaze can withstand temperature differences from -60 to +450 degrees Celcius. Thanks to the glaze, the washbasins are also resistant to impact, scratches and abrasion, and are considered colorfast and light-resistant without discoloration)- for installation from above- cut-out size 665 x 425 mm- with tap hole- without overflow- including stem valve with white glazed cover cap- including mounting set- Fitting note: optimum impact area approx. 120 - 150mm from center of tap hole