CLEANTRONIC wall-hung shower toilet

- with Sigma concealed cistern 12cm- For drywall construction- For installation in part-high or room-high pre-wall installations- For installation in room-high installation walls- For installation in part-height or room-height Geberit Duofix system walls- For wall-mounted WCs with connection dimensions according to DIN EN 33:2011-11- For wall-mounted WCs with projection up to 62 cm- For 1-flush, 2-flush or flush-stop flushes- For floor build-ups 0-20 cm- Self-supporting frame powder coated- Frame with drill holes ø 9 mm for fastening in wooden post and beam construction- Frame prepared for supports for WC ceramics with small bearing surface- Footrests galvanized- footrests adjustable 0-20 cm- Footrests with anti-slip- Footplates rotatable- Footplate depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails- Connection bend can be mounted in various depth positions without tools, adjustment range 45 mm- Fastening of connection bend sound-insulated- Flush-mounted cisterns with actuation from the front- Flush-mounted cistern with condensation water insulation- With factory setting immediate flushing possible- Installation and maintenance work on the concealed cistern without tools- Water connection at the back or top center- Building protection for service opening protects against moisture and dirt- Construction protection for service opening can be cut to length- Equipped with empty pipe for water supply line for connection of Geberit AquaClean shower toilets- With mounting option for electrical connection- Scope of delivery: water connection R 1/2", MF-capable, with integrated angle valve and handwheel; construction protection for service opening; 2 protective plugs; connection set for WC, ø 90 mm; connection bend 90° made of PE-HD, ø 90 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; 2 threaded rods M12; fixing material

- TECEprofil WC module with uni cistern, installation height 1120 mm.- Toilet module including "easy fit" actuator plate mounting and empty pipe for connecting electronic shower toilets. For mounting on TECEprofil profile pipes or for installation in metal or wooden post-and-beam walls and as a pre-wall or corner module; also suitable for single-block installation.- Safety tank made of impact-resistant plastic- Cistern completely pre-assembled and sealed- Cistern connection with external thread R 1/2" on the side, compatible with quick adapters- 10 liters tank volume; 6 liters preset standard flush volume; 4.5/7.5/9 liters flush volume optionally adjustable at any time; 3 liters partial volume flush with dual volume technology. Residual volume can be used for immediate cleaning rinse.- condensation water insulated- for TECE actuating plates and WC fitting- Can be used as a single or dual flush cistern- "easy fit" actuator plate installation- installation tunnel for service opening, can be shortened without tools- low-noise hydraulic filling valve, fitting group 1 according to DIN 4109- self-supporting, powder-coated- two retaining bolts and nuts M 12- WC drain bend DN 90 with transition adapter DN 90/100 made of PP- transition adapter also suitable for horizontal installation- WC connection set DN 90- Empty pipe for universal shower-toilet water connection (check connection position)- Raw construction protection for shower-toilet connection, including empty socket for transformer- Adjustment of raised ceramic fixing for 48 cm seat height, possible according to DIN 18040 (DIN 18040: Barrier-free building - Part 1: Publicly accessible buildings and workplaces)