Redwell enamel heating
A Redwell infrared heater made of ceramic can be ideally integrated into any environment due to its unobtrusive appearance. Convince yourself!
Prod. no.:
W0250WHI0EU
Redwell WE-Line WE250, without frame, white steel, RAL 9016, infrared heating
- White sheet steel surface (other colors available on request)- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: concealed bracket for wall mounting- No additional bracket is required for ceiling mounting (mounting material supplied can be used for brick, concrete and stone walls)- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 5kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee- Infrared heaters according to IEC 60675-3:2020 (standard of the International Electrotechnical Commission, which specifies how the radiation efficiency of direct electric heaters is determined and how high it must be for such a heater to be classified as a "true" infrared heater)
Prod. no.:
R1100DISB01
Redwell Diskus 1100 infrared heater, ceiling spotlight, structured
- Surface: metal sheet coated- Partial storage heater- 230Volt, 50Hz- electrosmog arm- protection class: IP 40 (fixed connection)- fast and enormous temperature development- power 1150W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as a supplementary or transitional heater- the manufacturer recommends 30-45 watts per m³ for use as a winter garden- the manufacturer recommends for use in a warehouse 10-30W per m³- weight ca 22kg- diameter 800mm- 10 years manufacturer warranty
Prod. no.:
P0300WHISEU
Redwell Pipewave floor-standing infrared heater 300 Watt, RAL 9016 white
- Infrared heating column- for flexible use- Floor model- Powder-coated aluminum- IP40 mains plug (EU, Switzerland on request), IP40 fixed connection- 300 watts- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- the manufacturer recommends 10-30W per m³ for use in a warehouse- 6kg- Diameter 200mm- width 540mm- 10 year manufacturer's guarantee
Prod. no.:
RLARRWHI0EU
Redwell Largeround white textured, without frame, steel white
- Surface stainless steel powder-coated white- frameless- Heating element: Partial storage heater- Voltage 230 Volt, 50 Hz- Electromagnetic compatibility: Electrosmog arm- Protection class IP 40 (mains plug (EU, Switzerland on request), IP65 (fixed connection)- Mounting: concealed bracket for wall mounting- Output 610W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 13kg- Diameter 900mm- 17mm deep- 10 year manufacturer's guarantee- Infrared heaters according to IEC 60675-3:2020 (standard of the International Electrotechnical Commission, which specifies how the radiation efficiency of direct electric heaters is determined and how high it must be for such a heater to be classified as a "real" infrared heater)
Prod. no.:
R0600BBRAEU
Redwell Largewave R600 enamel steel, slate, panel heating
- Surface: Slate/panel- Heating element: Partial storage heater- Voltage 230 Volt, 50 Hz- Electromagnetic compatibility: Low electrosmog- Protection class IP 40 (mains plug (EU, Switzerland on request), IP40 (fixed connection)- Mounting: concealed bracket for wall mounting- Output 630W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 12kg- 1006 x 606 x 17mm- 10 year manufacturer's warranty- Infrared heaters according to IEC 60675-3:2020 (standard of the International Electrotechnical Commission, which specifies how the radiation efficiency of direct electric heaters is determined and how high it must be for such a heater to be classified as a "true" infrared heater)
Prod. no.:
T160010130EU
Redwell Tower 1600 infrared heater, RAL 1013 pearl white 1600 watts, with castors, EU plug
- Surface: Powder-coated aluminum- Voltage: 230 Volt, 50 Herz- Protection class IP40 (mains plug (EU, Switzerland on request))- 1.8m cable- 10-year guarantee- Floor model, with castors- 317 x 317 x 1586 mm- 1600 Watt output- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory
Variants from €1,011.50*
Prod. no.:
W0250PIC0EU40
Redwell Image infrared heating WE250 motif wooden door
- Motif: Wooden door- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
P0300WHIWEU
Redwell Pipewave infrared heater 300 Watt, RAL 9016 white
- Infrared heating column- for flexible use- Wall and ceiling mounting- Powder-coated aluminum- IP40 mains plug (EU, Switzerland on request), IP40 fixed connection- 300 watts- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- the manufacturer recommends 10-30W per m³ for use in a warehouse- 4kg- Diameter 200mm- width 515mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU50
Redwell Picture infrared heater WE250 Motif Abstract 13
- Motif: Abstract 13- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU56
Redwell Picture infrared heater WE250 Motif Oil Painting 3
- Motif: Oil Painting 3- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
T155010130EU
Redwell Doubletower infrared heater, RAL 1013 pearl white 1550 watts, with castors, EU plug
- Surface: Powder-coated aluminum- Voltage: 230 Volt, 50 Herz- Protection class IP40 (mains plug (EU, Switzerland on request))- 1.8m cable- 10-year guarantee- Floor model, with castors- 317 x 317 x 1586 mm- 1550 watt output- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory
Variants from €1,999.56*
Prod. no.:
W0250PIC0EU20
Redwell Picture infrared heater WE250 Motif Buddha
- Motif: Buddha- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
RM06001013SEU
Redwell Move free-standing infrared heater RAL 1013 pearl white, 600 watts
- Floor model without castors (EU plug, CH or UK plug on request)- 600 watts- 1100 x 427 x 272mm- Ideal for customers who want to create flexible warmth and comfort in their home- the manufacturer recommends 7-10 watts per m³ of space for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building and 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory
Variants from €1,059.10*
Prod. no.:
W0250PIC0EU26
Redwell Picture infrared heating WE250 motif dandelion
- Motif: Dandelion- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
RMIDRWHI0EU
Redwell Middleround infrared heater without frame white RAL 9016
- Frameless- Heating element: Partial storage heater- Voltage 230 Volt, 50 Hz- Electromagnetic compatibility: Electrosmog arm- Protection class IP 40 (mains plug (EU, Switzerland on request), IP65 (fixed connection)- Mounting: concealed bracket for wall mounting- Output 400W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 9kg- Diameter 710mm- 17mm deep- 10 year manufacturer's guarantee- Infrared heaters according to IEC 60675-3:2020 (standard of the International Electrotechnical Commission, which specifies how the radiation efficiency of direct electric heaters is determined and how high it must be for such a heater to be classified as a "true" infrared heater)
Variants from €547.40*
Prod. no.:
A0300BLA001
Redwell Activist XS black, without plug, infrared heater with light
- Heating & light in one element- Tubular hollow twill with powder coated aluminum surface, other colors on request- Infrared heating technology- with outflow openings, LED light at the lower front side- 300 watt power- the manufacturer recommends for a passive house 7-10 watts per m³ room, for a low-energy house 16-19 watts per m³, for a new building 20-22 watts per m³, for an old building 27-30 watts per m³- the manufacturer recommends 10-15 watts per m³ for use as a supplementary or transitional heater- the manufacturer recommends 30-45 watts per m³ for use as a winter garden- the manufacturer recommends for use in a warehouse 10-30W per m³- 5kg weight- 200 x 515mm- 10 years manufacturer warranty
Variants from €957.95*
Prod. no.:
R0600DCBF0EU
Redwell Exclusive-Line glass infrared heater R600
- Fine, milled structures adorn the modern glass surface- Individual selection of surface and structure variants- Smooth black glass surface- Chiemsee texture selection- Protection class IP 40 (mains plug (EU, Switzerland on request), IP65 (fixed connection))- Installation: Wall mounting possible- Output 630W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 21kg- 1020 x 620 x 19mm- 10 year manufacturer's guarantee- Infrared heaters according to IEC 60675-3:2020 (standard of the International Electrotechnical Commission, which specifies how the radiation efficiency of direct electric heaters is determined and how high it must be for such a heater to be classified as a "real" infrared heater)
Prod. no.:
W0250PIC0EU24
Redwell Image infrared heating WE250 Motif Thinking
- Motif: Thinking- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU43
Redwell Image infrared heating WE250 motif round wood
- Motif: Round wood- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU47
Redwell Picture infrared heater WE250 Motif Abstract 10
- Motif: Abstract 10- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU58
Redwell Picture infrared heating WE250 motif waterfalls
- Motif: Waterfalls- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU51
Redwell Image infrared heating WE250 Motif Greenery
- Motif: Greenery- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU21
Redwell Picture infrared heater WE250 Motif Klimt
- Motif: Klimt- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU1
Redwell Image infrared heating WE250 Motif Sunset
- Motif: Sunset- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
R0600CGB0EU
Redwell Design Line Glass Infrared Heater R600
- The Design-Line gives the glass heater a stylish touch. Fine lines and structures elegantly adorn the surface of the glass heater- Surface: ESG ceramic coated- Rear: 3D bright annealed stainless steel- Surface/structure: Crossing black- Protection class IP 40 (mains plug (EU, Switzerland on request), IP65 (fixed connection))- Mounting: Wall mounting possible- Output 630W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 21kg- 1020 x 620 x 19mm- 10 year manufacturer's guarantee- Infrared heaters according to IEC 60675-3:2020 (standard of the International Electrotechnical Commission, which specifies how the radiation efficiency of direct electric heaters is determined and how high it must be for such a heater to be classified as a "true" infrared heater)
Prod. no.:
W0250PIC0EU2
Redwell Image infrared heating WE250 Motif Dreams
- Motif: Dreams- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU48
Redwell Picture infrared heater WE250 Motif Abstract 11
- Motif: Abstract 11- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU16
Redwell Image infrared heating WE250 Motif Chili
- Motif: Chili- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU7
Redwell Image infrared heating WE250 Motif Seed
- Motif: Seed- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU30
Redwell Picture infrared heating WE250 motif Golden Circles
- Motif: Golden Circles- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU9
Redwell Image infrared heating WE250 Motif Hong Kong
- Motif: Hong Kong- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU60
Redwell Picture infrared heating WE250 motif turquoise floral
- Motif: Turquoise floral- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU28
Redwell Image infrared heating WE250 Motif feathers 1
- Motif: Feathers 1- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
LF0250WE
Redwell Light frame for WE-Line WE250
- Aluminum profile, anodized- Stainless steel corner connector with plastic support and lock- Protection class: IP 20- Light color: 3500 K 8 (warm white)- 752 x 352 mm- 34W output- Luminous intensity 1594lm- Power supply unit and mounting kit are included in the scope of delivery- Can be operated via room switch or optional remote control LFDIMM
Prod. no.:
W0250PIC0EU18
Redwell Image infrared heater WE250 Motif Abstract 5
- Motif: Abstract 5- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU8
Redwell Picture infrared heater WE250 Motif Handmade
- Motif: Handmade- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU5
Redwell Image infrared heating WE250 Motif Deep Blue
- Motif: Deep Blue- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU6
Redwell Image infrared heating WE250 motif lavender
- Motif: Lavender- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU31
Redwell Image infrared heating WE250 Motif Steg 2
- Motif: Bar 2- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU17
Redwell Image infrared heating WE250 motif vine
- Motif: Vine- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU57
Redwell Image infrared heating WE250 Motif Drop 2
- Motif: Drop 2- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU39
Redwell Picture infrared heater WE250 Motif Patchwork 2
- Motif: Patchwork 2- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU36
Redwell Picture infrared heating WE250 motif flower vases
- Motif: Flower vases- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU23
Redwell Image infrared heating WE250 Motif City Night
- Motif: City Night- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU53
Redwell Picture infrared heater WE250 Motif Retro
- Motif: Retro- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU3
Redwell Image infrared heating WE250 Motif Cocktail
- Motif: Cocktail- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU12
Redwell Image infrared heating WE250 Motif Lemon
- Motif: Lemon- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Prod. no.:
W0250PIC0EU38
Redwell Picture infrared heater WE250 Motif Patchwork 1
- Motif: Patchwork 1- Surface: Printed sheet steel- frameless- Voltage: 230Volt, 50Hz- Electrosmog arm- Protection class: IP40 (mains plug (EU, Switzerland on request)); IP65 (fixed connection)- Mounting: Wall and ceiling mounting possible- 250W- the manufacturer recommends 7-10 watts per m³ room for a passive house, 16-19 watts per m³ for a low-energy house, 20-22 watts per m³ for a new building, 27-30 watts per m³ for an old building- the manufacturer recommends 10-15 watts per m³ for use as additional or transitional heating- the manufacturer recommends an output of 30-45 watts per m³ for use as a conservatory- Weight approx. 6kg- Dimensions 706 x 306 x 18mm- 10 year manufacturer's guarantee
Redwell enamel heating - infrared heating with ceramic surface
Redwell infrared heaters are always a good choice, whether as the main, additional or transitional heating. They are easy to place and ecologically as well as economically efficient. Enjoy heat completely worry-free, simply attach, plug in and enjoy the good indoor climate. The Austrian company Redwell specializes in the development and production of high-quality infrared heaters and is constantly researching to offer you the highest quality, enormous flexibility and convincing functionality. Create warmth for your home as it should be, soothing and energy efficient.
Infrared heater made of steel ceramic coated
With the series Largewave Redwell offers a modern enamel heater, which stylishly integrates into the room. The shiny white ceramic heater testifies to the highest manufacturing quality. Above all, the particularly resistant surface emphasizes the elegant design of a room. With the high-quality aluminum frame, the classic and unobtrusive look blends seamlessly into the surroundings. With the help of the concealed bracket, both wall and ceiling mounting is possible.
The difference is in the air
The special feature of infrared heating is that it does not heat the air, but solid bodies in the room. This means that there is no air circulation, which means that dust turbulence can be avoided. The objects in the room remain dry and give off heat. In addition, infrared heat has a positive effect on people. Redwell infrared heaters are particularly inexpensive to purchase and energy-saving in operation, because with the heating of the room, inventory and human body is created external heat storage. Once the desired temperature is reached, the heating element automatically turns off until the accumulators need to be replenished.
The manufacturer recommends the following performances:
- Passive house: 7-10 W per m³
- Low-energy house: 16-19 W per m³
- New building: 20-22 W per m³
- Old building: 27-30 W per m³
- Use as supplementary or transitional heating: 10-15 W per m³
- Use for winter garden: 30-45 W per m³