KLUDI concealed body
In the b-cube online store you will find numerous KLUDI concealed bodies to match your fittings. Order directly now!
Prod. no.:
29509
KLUDI Flush valve DN 12 solder connection 15mm
- Kit 1 Pre-assembly- Protective sleeve
Prod. no.:
38243
KLUDI Shell set for concealed washbasin two-hole wall-mounted single lever mixer
- for flush mounting- Flow class S- ceramic cartridge with hot water limiter- with shell plug G 1/2- mounting depth compensation 30 mm- threaded connection G 1/2- without finishing set- Noise class I
Prod. no.:
740010000
KLUDI Adapter for reversed water paths for thermostat
- Cold and hot water inlet interchanged- For Flexx Boxx 88011- for Feinbau sets with production date until 02/2018
Prod. no.:
53811
KLUDI Flush valve Threaded connection
- Flush mounting- Kit 1 - Pre-assembly- Ceramic upper part 90°- Protective sleeve
Prod. no.:
88011
KLUDI Flexx.Boxx. Concealed body
- Concealed unit body DN 20- Flush-mounted rough-in set- without fine installation set- without functional unit- wall installation- with one-piece elastomer jacket- with shell protection cap- with additional sealing sleeve- with test and flushing block- made of dezincification-resistant brass- P-IX 19310/ICB
Prod. no.:
88088
KLUDI Flexx.Boxx flush-mounted unit body
- for free-standing single lever bath and shower mixers- for floor mounting- with one-piece elastomer sleeve- made of brass resistant to dezincification- with bodywork protection cap- with adhesive collar- with flushing connection set- without stand fitting- without extension set
Prod. no.:
29747
KLUDI Two-way conversion kit pre-assembly
- Basic body for two-way conversions
Prod. no.:
29209
KLUDI Flush valve DN 15 threaded connection G 1/2
- Kit 1 Pre-assembly- Protective sleeve- PA-IX 9923/l
Prod. no.:
29513
KLUDI Flush valve DN 25 solder connection 28mm
- Kit 1 Pre-assembly- Protective sleeve
Prod. no.:
35158
KLUDI Flush thermostat body
- for thermostats without shut-off valve
Prod. no.:
2975100
KLUDI Two-way conversion kit pre-assembly
- for two-way conversion
Prod. no.:
29215
KLUDI Flush valve DN 32 threaded connection G 1 1/4
- Kit 1 Pre-assembly- Protective sleeve
Prod. no.:
29511
KLUDI Flush valve DN 20 solder connection 22mm
- Kit 1 Pre-assembly- Protective sleeve
Prod. no.:
38242
KLUDI Shell set DN 15 for concealed washbasin two-hole wall-mounted single mixer
- for flush mounting- Flow rate 16 l/min at 3 bar- ceramic cartridge with hot water limiter- with body plug G 1/2- mounting depth compensation 30 mm- threaded connection G 1/2- without finishing set- Noise class I
Prod. no.:
35156
KLUDI Flush thermostat body
- For thermostats with shut-off valve
Prod. no.:
29211
KLUDI Flush valve DN 20 threaded connection G 3/4
- Kit 1 Pre-assembly- Protective sleeve- PA-IX 2427/l
Prod. no.:
745800000
KLUDI Adapter for interchanged waterways for single-handle mixers
- Cold and hot water inlet interchanged- For Flexx Boxx 88011