Geberit cistern
Are you still looking for a cistern? The Geberit cisterns are of high quality and are available in different deisgns.
Prod. no.:
110300005
Geberit Kombifix element for wall-hung WC, 108cm, with Sigma concealed cistern 12cm
- For masonry walls- For installation in partial or room-height pre-wall installations- For wall-mounted WCs with connection dimensions according to DIN EN 33:2011-11- For 1-flush, 2-flush or flush-stop flushes- Mounting frame powder coated- Mounting frame with four mounting brackets- Connection elbow can be mounted without tools- Mounting Connection bend can be mounted from the front without tools- Flush-mounted cisterns with actuation from the front- Flush-mounted cistern with condensation water insulation- Immediate flushing possible with factory setting- Installation and maintenance work on the concealed cistern without tools- Water connection at the back or top center- Building protection for service opening protects against moisture and dirt- Construction protection for service opening can be cut to length- Equipped with empty pipe for water supply line for connection of Geberit AquaClean shower toilets- With mounting option for electrical connection- Scope of delivery: water connection R 1/2", MF-capable, with integrated angle valve and handwheel; construction protection for service opening; connection set for WC, ø 90 mm; connection elbow made of PE-HD, ø 90 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; 2 protective plugs; sound insulation set; 2 threaded rods M12; fixing material
Prod. no.:
227780000
Geberit Renova top ceramic cistern
- Top-mounted ceramic cistern, 3/6l, dual flush- EN 997 - CL1 - 6 - VR II, EN 14055- Color : white(alpine)- Material : sanitary porcelain- With built-in dual flush push button faucet including push button and blind plug, chrome plated.- Dimensions: Width : 364 mm, Depth : 163 mm, Height : 355 mm.- Inlet : lateral- Can be combined with: Renova Nr.1 combination WC, model no.: 203820, 203821
Prod. no.:
140305101
Geberit AP cistern AP140, 2-flush,
- For semi-high-hanging installation- For the replacement of pressure flushers- Insulated against condensation- Water connection at the back center- Scope of delivery: Angle valve 1/2"; Dam insert; Reduction 3/4"-1/2"; Sink bend 90° made of ABS, ø 50 / 44 mm, 52 x 22 cm; Sleeve made of EPDM, ø 44 / 55 mm; Mounting material- bahamabeige
Variants from €206.73*
Prod. no.:
461311005
Geberit GIS element for wall-mounted WC, 114cm, with Sigma concealed cistern 12cm
- For installation in Geberit GIS support systems for pre-walls, partition walls or free-standing walls- Suitable for barrier-free construction- For wall-mounted WCs with connection dimensions according to DIN EN 33:2011-11- For wall-mounted WCs with extended projection up to 70 cm- For 1-flush, 2-flush or flush-stop flushes- For floor build-ups 0-20 cm- Galvanized frame- Frame with four quick fasteners- In the Geberit GIS supporting structure continuously height-adjustable- Frame prepared for supports for WC ceramics with small contact surface- Connection bend can be mounted in various depth positions without tools, adjustment range 45 mm- Fastening of connection bend sound-insulated- Flush-mounted cisterns with actuation from the front- Flush-mounted cistern with condensation water insulation- With factory setting immediate flushing possible- Installation and maintenance work on the concealed cistern without tools- Water connection at the back or top center- Building protection for service opening protects against moisture and dirt- Construction protection for service opening can be cut to length- Equipped with empty pipe for water supply line for connection of Geberit AquaClean shower toilets- With mounting option for electrical connection- Scope of delivery: water connection R 1/2", MF-capable, with integrated angle valve and handwheel; construction protection for service opening; connection set for WC, ø 90 mm; connection bend 90° made of PE-HD, ø 90 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; 4 protection and marking plugs; 2 threaded rods M12; fixing material
Prod. no.:
140300101
Geberit AP cistern AP140, 2-flush
- For low-hanging mounting- Insulated against condensation- Water connection at the side or at the center back- Scope of delivery: corner valve 1/2"; flushing elbow 90° made of ABS, ø 50 / 44 mm, 23 x 23 cm; sleeve made of EPDM, ø 44 / 55 mm; fixing material- bahamabeige
Variants from €184.47*
Prod. no.:
215423001
Geberit Conversion set for Geberit concealed cistern type 10.600
- For conversion to flush-stop-flushes- For Geberit concealed cisterns (year of manufacture 1967-1978)- Scope of delivery: protection plate; lifting bell; hold-down clamp; basin; filling valve type 380; extension; fixing material; connecting pipe made of copper
Prod. no.:
215421001
Geberit Conversion set for Geberit concealed cistern type 16.000
- For conversion to flush-stop-flushes- For Geberit concealed cisterns (year of manufacture 1965-1967)- Scope of delivery: protection plate; lifting bell; hold-down clamp; basin; filling valve type 380; extension; fixing material; connecting pipe made of copper
Prod. no.:
229420000
Geberit iCon ceramic cistern top
- Top-mounted ceramic cistern, 3/6l, dual flush- EN 14055- Color : white(alpine)- Material : sanitary porcelain- With built-in dual-flush push button faucet incl. push button and blind plug, chrome plated.- Dimensions: Width : 375 mm, Depth : 145 mm, Height : 425 mm.- Inlet : lateral- Can be combined with: iCon combination WC, model no.: 200460
Prod. no.:
215422001
Geberit Conversion set for Geberit concealed cistern type 10.500
- For conversion to flush-stop-flushes- For Geberit concealed cisterns (year of construction 1970-1974)- Scope of delivery: protection plate; lifting bell; hold-down; basin; filling valve type 380; extension; fixing material; connecting pipe made of copper
Prod. no.:
461151001
Geberit GIS element for wall-mounted WC, 100cm, with Omega concealed cistern 12cm
- For installation in Geberit GIS support systems for partial-height pre-wall or free-standing wall- For wall-mounted WCs with connection dimensions according to DIN EN 33:2011-11- For 2-flush system- For floor build-ups 0-20 cm- Galvanized frame- Frame with four quick fasteners- In Geberit GIS supporting structure continuously height-adjustable- Frame prepared for supports for WC ceramics with small contact surface- Connection bend can be mounted in various depth positions without tools, adjustment range 45 mm- Fastening of connection bend sound-insulated- UP cistern with actuation from above or from the front- Flush-mounted cistern with condensation water insulation- Immediate flushing possible with factory setting- Installation and maintenance work on the concealed cistern without tools- Water connection on the left side or left rear- Building protection for service opening protects against moisture and dirt- Construction protection for service opening can be cut to length- Equipped with empty pipe for water supply line for connection of Geberit AquaClean shower toilets- With mounting option for electrical connection- Scope of delivery: water connection R 1/2", MF-capable, with integrated angle valve and handwheel; construction protection for service opening; connection set for WC, ø 90 mm; connection bend 90° made of PE-HD, ø 90 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; 4 protection and marking plugs; 2 threaded rods M12; fixing material
Prod. no.:
461315005
Geberit GIS element for wall-mounted WC, 114cm, with Sigma concealed cistern 12cm
- For installation in Geberit GIS support systems for pre-walls, partition walls or free-standing walls- Suitable for barrier-free construction- For wall-mounted WCs with connection dimensions according to DIN EN 33:2011-11- For wall-mounted WCs with extended projection up to 70 cm- For connecting an external odor extraction system- For 1-flush, 2-flush or flush-stop flushes- For floor build-ups 0-20 cm- Not suitable for wall-mounted WC ceramics with raised seat position- Galvanized frame- Frame with four quick fasteners- In Geberit GIS supporting structure continuously height-adjustable- Frame prepared for supports for WC ceramics with small contact surface- Connection bend can be mounted in various depth positions without tools, adjustment range 45 mm- Fastening of connection bend sound-insulated- Flush-mounted cisterns with actuation from the front- Flush-mounted cistern with condensation water insulation- Immediate flushing possible with factory setting- External odor extraction with connection sleeve ø 50 mm can be connected via flushing elbow- Installation and maintenance work on the concealed cistern without tools- Water connection at the back or top center- Building protection for service opening protects against moisture and dirt- Construction protection for service opening can be cut to length- Equipped with empty pipe for water supply line for connection of Geberit AquaClean shower toilets- With mounting option for electrical connection- Scope of delivery: water connection R 1/2", MF-capable, with integrated angle valve and handwheel; construction protection for service opening; connection set for WC, ø 90 mm; connection bend 90° made of PE-HD, ø 90 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; 4 protection and marking plugs; 2 threaded rods M12; fixing material
Prod. no.:
127023111
Geberit Surface-mounted cistern AP127, flush-stop-flush, water connection bottom right
- For low-hanging mounting- Insulated against condensation- Water connection at the bottom right- Scope of delivery: corner valve 1/2"; sink bend 90° made of ABS, ø 50 / 44 mm, 23 x 23 cm; sleeve made of EPDM; connecting pipe made of copper; fixing material
Prod. no.:
140314111
Geberit AP cistern AP140, 2-flush, with screwed cistern cover
- For low-hanging mounting- For public and semi-public areas- Insulated against condensation- Water connection at the side or at the center back- Cistern cover screwed on the side- Scope of delivery: angle valve 1/2"; flushing elbow 90° made of ABS, ø 50 / 44 mm, 23 x 23 cm; sleeve made of EPDM, ø 44 / 55 mm; fixing material- white-alpine
Prod. no.:
461160001
Geberit GIS element for wall-mounted WC, 114cm, with Omega concealed cistern 12cm
- For installation in Geberit GIS support systems for pre-walls, partition walls or free-standing walls- For wall-mounted WCs with connection dimensions according to DIN EN 33:2011-11- For wall-mounted WCs with extended projection up to 70 cm- For 2-flush system- For floor constructions 0-20 cm- Galvanized frame- Frame with four quick fasteners- In Geberit GIS supporting structure continuously height-adjustable- Frame prepared for supports for WC ceramics with small contact surface- Connection bend can be mounted in various depth positions without tools, adjustment range 45 mm- Fastening of connection bend sound-insulated- Flush-mounted cisterns with actuation from the front- Flush-mounted cistern with condensation water insulation- With factory setting immediate flushing possible- Installation and maintenance work on the concealed cistern without tools- Water connection on the left side or left rear- Building protection for service opening protects against moisture and dirt- Construction protection for service opening can be cut to length- Equipped with empty pipe for water supply line for connection of Geberit AquaClean shower toilets- With mounting option for electrical connection- Scope of delivery: water connection R 1/2", MF-capable, with integrated angle valve and handwheel; construction protection for service opening; connection set for WC, ø 90 mm; connection bend 90° made of PE-HD, ø 90 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; 4 protection and marking plugs; 2 threaded rods M12; fixing material
Prod. no.:
140000101
Geberit Surface-mounted cistern AP140, flush-stop-flush, water connection at the side or at the center rear
- For low-hanging mounting- Low noise- Insulated against condensation- Water connection at the side or at the center back- Scope of delivery: corner valve 1/2"; flushing elbow 90° made of ASA, ø 50 / 44 mm, 23 x 23 cm; sleeve made of EPDM, ø 44 / 55 mm; fixing material- bahamabeige
Variants from €184.47*
Prod. no.:
127022111
Geberit AP cistern AP127, flush-stop-flush, water connection bottom left
- For low-hanging mounting- Insulated against condensation- Water connection at the bottom left- Scope of delivery: Angle valve 1/2"; Sink bend 90° made of ABS, ø 50 / 44 mm, 23 x 23 cm; Sleeve made of EPDM; Connecting pipe made of copper; Mounting material
Prod. no.:
461303005
Geberit GIS element for wall-hung WC, 114cm, with Sigma concealed cistern 12cm, corner solution
- For creating Geberit GIS support systems- For 45° pre-wall installation in a room corner- For wall-mounted WCs with connection dimensions according to DIN EN 33:2011-11- For 1-flush, 2-flush or flush-stop flushes- For floor constructions 0-20 cm- Galvanized frame- Frame with four quick fasteners- In Geberit GIS supporting structure infinitely height adjustable- Dimensions for base area, front edge planking: W = 65cm, D = 33 cm, side length = 46 cm- Frame prepared for supports for WC ceramics with small support surface- Connection bend can be mounted in various depth positions without tools, adjustment range 45 mm- Fastening of connection bend sound-insulated- Flush-mounted cisterns with actuation from the front- Flush-mounted cistern with condensation water insulation- With factory setting immediate flushing possible- Installation and maintenance work on the concealed cistern without tools- Water connection at the back or top center- Building protection for service opening protects against moisture and dirt- Construction protection for service opening can be cut to length- Equipped with empty pipe for water supply line for connection of Geberit AquaClean shower toilets- With mounting option for electrical connection- Scope of delivery: water connection R 1/2", MF-capable, with integrated angle valve and handwheel; construction protection for service opening; connection set for WC, ø 90 mm; connection bend 90° made of PE-HD, ø 90 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; 4 protection and marking plugs; 2 threaded rods M12; fixing material
Prod. no.:
140014111
Geberit AP cistern AP140, flush-stop-flush, with screwed cistern lid
- For low-hanging mounting- For public and semi-public areas- Low noise- Insulated against condensation- Water connection at the side or center back- Cistern cover screwed on the side- Scope of delivery: angle valve 1/2"; flushing elbow 90° made of ABS, ø 50 / 44 mm, 23 x 23 cm; sleeve made of EPDM, ø 44 / 55 mm; fixing material- white-alpine
Prod. no.:
461141001
Geberit GIS element for wall-mounted WC 87cm, with Omega concealed cistern 12cm
- For installation in Geberit GIS support systems for partial-height pre-wall or free-standing wall- For wall-mounted WCs with connection dimensions according to DIN EN 33:2011-11- For 2-flush system- For floor build-ups 0-20 cm- Galvanized frame- Frame with four quick fasteners- In Geberit GIS supporting structure continuously height-adjustable- Frame prepared for supports for WC ceramics with small contact surface- Connection bend can be mounted in various depth positions without tools, adjustment range 45 mm- Fastening of connection bend sound-insulated- UP cistern with actuation from above or from the front- Flush-mounted cistern with condensation water insulation- Immediate flushing possible with factory setting- Installation and maintenance work on the concealed cistern without tools- Water connection on the left side or left rear- Building protection for service opening protects against moisture and dirt- Construction protection for service opening can be cut to length- Equipped with empty pipe for water supply line for connection of Geberit AquaClean shower toilets- With mounting option for electrical connection- Scope of delivery: water connection R 1/2", MF-capable, with integrated angle valve and handwheel; construction protection for service opening; connection set for WC, ø 90 mm; connection bend 90° made of PE-HD, ø 90 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; 4 protection and marking plugs; 2 threaded rods M12; fixing material
Prod. no.:
128000115
Geberit Surface-mounted cistern AP128, flush-stop-flush, water connection at the side or center back
- For surface mounting- Low noise- Flush-stop-flush- Insulated against condensation- Water connection at the side or at the center back- Scope of delivery: angle valve 1/2"; EPDM seal; bent copper pipe; fixing material
Prod. no.:
110367005
Geberit Kombifix element for wall-hung WC, 108cm, with Sigma concealed cistern 12cm, for odor extraction
- For masonry walls- For installation in room-high pre-wall installations- For wall-mounted WCs with connection dimensions according to DIN EN 33:2011-11- For connecting an external odor extraction system- For 1-flush, 2-flush or flush-stop flushes- Not suitable for wall-mounted WC ceramics with raised seat position- Mounting frame powder coated- Mounting frame with four mounting brackets- Mounting depth adjustable, 12-20.5 cm- Connection bend can be mounted without tools- Mounting Connection bend can be mounted from the front without tools- Flush-mounted cisterns with actuation from the front- Flush-mounted cistern with condensation water insulation- Immediate flushing possible with factory setting- External odor extraction with connection sleeve ø 50 mm can be connected via flushing elbow- Installation and maintenance work on the concealed cistern without tools- Water connection at the back or top center- Building protection for service opening protects against moisture and dirt- Construction protection for service opening can be cut to length- Equipped with empty pipe for water supply line for connection of Geberit AquaClean shower toilets- With mounting option for electrical connection- Scope of delivery: water connection R 1/2", MF-capable, with integrated angle valve and handwheel; construction protection for service opening; connection set for WC, ø 90 mm; connection elbow made of PE-HD, ø 90 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; 2 protective plugs; sound insulation set; 2 threaded rods M12; fixing material
Prod. no.:
349352001
Geberit Odor extraction set for Geberit Sigma concealed cisterns
- For Geberit mounting elements and modules with prepared connection for odor extraction with exhaust air.- Connecting piece for connection to flush-mounted fan housing- Scope of delivery: flexible pipe made of aluminum; connection piece; connection pipe with bend; reduction ø 80 / 50 mm; fixing plate; fixing material
Prod. no.:
215420001
Geberit Conversion set for Geberit concealed cistern type 15.000
- For conversion to flush-stop-flushes- For Geberit concealed cisterns (year of manufacture 1964-1967)- Scope of delivery: protection plate; lifting bell; hold-down; basin; filling valve type 380; extension; fixing material; connecting pipe made of copper
Prod. no.:
140005111
Geberit Surface-mounted cistern AP140, flush-stop-flush, water connection at center back
- For semi-high mounting- For replacement of pressure flushers- Low noise- Insulated against condensation- Water connection at the side or at the center back- Scope of delivery: angle valve 1/2"; flushing elbow 90° made of ASA, ø 50 / 44 mm, 52 x 22 cm; sleeve made of EPDM, ø 44 / 55 mm; reduction 3/4"-1/2"; fixing material- white-alpine
Prod. no.:
240835001
Geberit Conversion set for 2-flush for cistern types 10.400 and 10.800
- For conversion to 2-flush systems- For Geberit concealed cisterns type 10.400- For Geberit concealed cisterns type 110.800 (year of construction 1978-1987)- Scope of delivery: protection plate; lifting bell; hold-down device; basin; filling valve type 380; connecting pipe made of copper; fixing material
Prod. no.:
127005111
Geberit AP cistern AP127, flush-stop-flush,
- For semi-high mounting- For replacement of pressure flushes- Insulated against condensation- Water connection at the back center- Scope of delivery: angle valve 1/2"; reduction 3/4"-1/2"; flushing elbow 90° made of PVC, ø 50 / 44 mm, 52 x 22 cm; sleeve made of EPDM, ø 44 / 55 mm; fixing material- To be ordered additionally: Accumulation insert
Prod. no.:
128300115
Geberit Surface-mounted cistern AP128, 2-flush, water connection at the side or center back
- For surface mounting- Low noise- 2-quantity flushing- Insulated against condensation- Water connection at the side or at the center back- Scope of delivery: angle valve 1/2"; EPDM seal; bent copper pipe; fixing material
Prod. no.:
127014111
Geberit AP cistern AP127, flush-stop-flush, with screwed cistern lid
- For low-hanging mounting- Insulated against condensation- Water connection at the side or at the center back- Scope of delivery: corner valve 1/2"; flushing elbow 90° made of ABS, ø 50 / 44 mm, 23 x 23 cm; sleeve made of EPDM, ø 44 / 55 mm; fixing material
Prod. no.:
240515002
Geberit Conversion set for 2-flush for cistern types 110.800
- For conversion to 2-flush flushes- For Geberit concealed cisterns type 110.800 (year of manufacture 1988-1997)- Scope of delivery: protection plate; lifting bell; bearing block; hold-down device; basin; filling valve type 380; fixing material
Geberit cistern for your bathroom
A Geberit cistern meets the highest functional requirements and at the same time integrates perfectly into any bathroom. This is because the company has strongly shaped the classic concealed cistern. For more than 50 years, the quality products have now been installed in bathrooms and have since been known for their special reliability. A special quality feature is the 25-year warranty on spare parts and the low water consumption. Sustainability is the focus here. Installation in the wall or retrofitting of the WC is also possible at a later date and at the same time very simple.
A basic distinction can be made between the Geberit cisterns of the Geberit Sigma and Geberit Omega series. While the Geberit Sigma cisterns are also suitable for corner installation, the models in the Geberit Omega series are characterized by great flexibility.
Geberit cistern spare parts
For the Geberit cisterns there are numerous spare parts, which ensure that these long time in cisterns.