Geberit accessories
Whether spare part, accessory or for reserve: Geberit offers a lot of supplements around its products. These include, for example, LED light strips, shower tray feet, water connection sets and sockets.
Prod. no.:
116098001
Geberit Electrical and communication junction box
- for Geberit Duofix and Geberit GIS elements- For power supply of Geberit WC controls and Geberit DuoFresh modules with 12V- For preparing the mains connections of Geberit AquaClean
Prod. no.:
154152001
Geberit Raw construction set for Geberit shower channels of the CleanLine series, screed height 65-90mm
- For installation inside buildings- For drainage of Geberit shower channels of the CleanLine series- For composite waterproofing- To accommodate the waste water of a single shower head- For installation with very low floor build-up- For screed heights ≥ 65 mm at the inlet- Deviating from requirements of EN 1253, the barrier water height is only 30 mm- Sealing fleece pre-mounted- Sealing fleece all around 10 cm, for connection of sealing systems- Base body made of EPS for sound decoupling and odor trap absorption- Scope of delivery: Building protection cover with discharge edge; thin-bed attachment; odor trap made of PE-HD; fastening material- To be ordered additionally: Shower channel of the CleanLine series
Prod. no.:
131088291
Geberit Monolith set ledge floor for wall toilet
- For connecting wall-mounted WCs to floor drains- For connecting pedestal toilets to floor drains- Scope of delivery: connection pipe made of PE-HD, ø 90 mm; bend made of ABS, ø 90 mm; pipe clamp; sleeve made of EPDM, ø 90 / 110 mm; adhesive
Prod. no.:
140300101
Geberit AP cistern AP140, 2-flush
- For low-hanging mounting- Insulated against condensation- Water connection at the side or at the center back- Scope of delivery: corner valve 1/2"; flushing elbow 90° made of ABS, ø 50 / 44 mm, 23 x 23 cm; sleeve made of EPDM, ø 44 / 55 mm; fixing material- bahamabeige
Variants from €138.35*
Prod. no.:
147038SI1
Geberit Wall control panel for AquaClean Mera
Double chamber odor trap
Prod. no.:
115086211
Geberit Cover frame for actuator plate Omega60
- for Geberit actuator plates Omega60- to cover unclean tile edges- high gloss chrome plated- material: zinc die casting
Prod. no.:
461453001
Geberit GIS rough box for Geberit ONE mirror cabinet 112cm
- Suitable for Geberit ONE- With fastening hooks for mirror cabinet, adjustable- With fastening for electrical connection- With planking stops made of sheet metal, galvanized- Scope of delivery: building protection, coupling bush for mains connection, fixing material
Prod. no.:
501020000
Geberit Socket
- Color: Anthracite gray- Incl. mounting set- Power supply : 230 V, ~50 Hz- Dimensions: Width : 60 mm, Height : 75 mm, Depth : 58 mm- Combinable with: Vanity units
Prod. no.:
243971001
Geberit Power supply unit for DuoFresh
- for installation in electrical junction boxes
Prod. no.:
111430001
Geberit Duofix element for washbasin, 112cm, floor fitting
- For drywall construction- For installation in part-high or room-high pre-wall installations- For installation in room-high installation walls- For installation in part-height or room-height Geberit Duofix system walls- For installation of washbasins- For drywall construction- For installation in part-height or room-height pre-wall installations- For installation in room-high installation walls- For installation in part-height or room-height Geberit Duofix system walls- For installation of washbasins- For free-standing taps- For floor constructions 0-20 cm- Self-supporting frame powder-coated- Frame with drill holes ø 9 mm for fastening in wood stud construction- Footrests galvanized- Footrests adjustable 0-20 cm- Footrests with anti-slip- Footplates rotatable- Footplate depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails- mounting distance washbasin 5-38 cm- Fixing for connecting bend height-adjustable and sound-insulated- Traverse fitting height and depth adjustable- Scope of delivery: 2 connection brackets Rp 1/2" / R 1/2", MF-capable; 2 sound insulation pads; 2 insulation sleeves; connection bend made of PE-HD, ø 50 mm; seal ø 44 / 32 mm; 2 threaded rods M10; fixing material
Prod. no.:
110300005
Geberit Kombifix element for wall-hung WC, 108cm, with Sigma concealed cistern 12cm
- For masonry walls- For installation in partial or room-height pre-wall installations- For wall-mounted WCs with connection dimensions according to DIN EN 33:2011-11- For 1-flush, 2-flush or flush-stop flushes- Mounting frame powder coated- Mounting frame with four mounting brackets- Connection elbow can be mounted without tools- Mounting Connection bend can be mounted from the front without tools- Flush-mounted cisterns with actuation from the front- Flush-mounted cistern with condensation water insulation- Immediate flushing possible with factory setting- Installation and maintenance work on the concealed cistern without tools- Water connection at the back or top center- Building protection for service opening protects against moisture and dirt- Construction protection for service opening can be cut to length- Equipped with empty pipe for water supply line for connection of Geberit AquaClean shower toilets- With mounting option for electrical connection- Scope of delivery: water connection R 1/2", MF-capable, with integrated angle valve and handwheel; construction protection for service opening; connection set for WC, ø 90 mm; connection elbow made of PE-HD, ø 90 mm; transition sleeve made of PE-HD, ø 90 / 110 mm; 2 protective plugs; sound insulation set; 2 threaded rods M12; fixing material
Prod. no.:
240626001
Geberit Set of activated carbon filter and nozzle cleaner for Geberit AquaClean WC complete systems
- for AquaClean 8000plus- for Balena 8000- for approx. 650 uses- Dermatologically tested- 2 x 400ml nozzle cleaner- activated carbon filter
Prod. no.:
140305101
Geberit AP cistern AP140, 2-flush,
- For semi-high-hanging installation- For the replacement of pressure flushers- Insulated against condensation- Water connection at the back center- Scope of delivery: Angle valve 1/2"; Dam insert; Reduction 3/4"-1/2"; Sink bend 90° made of ABS, ø 50 / 44 mm, 52 x 22 cm; Sleeve made of EPDM, ø 44 / 55 mm; Mounting material- bahamabeige
Variants from €155.05*
Prod. no.:
461135001
Geberit GIS mounting plate universal, 16 x 100cm
- For installation in Geberit GIS support systems for pre-walls, partition walls or free-standing walls- Suitable for barrier-free construction- For fastening support and grab rails- For fastening urinal partitions, shower partitions and wall cabinets- For fastening washbasins and hand washbasins- For fastening Geberit Monolith sanitary modules- Mounting plate made of veneer wood, waterproof glued- Can be divided into two smaller mounting plates- Circumferential cut-out to match Geberit GIS profile- Can be mounted vertically and horizontally
Prod. no.:
551070000
Geberit Urinal mounting kit with cover caps
- Only in combination with urinal (with Kerafix eccentric fastening)- chrome-plated- Scope of delivery: 2 Kerafix mounting brackets; 2 hexagon head screws 6x70mm; 2 dowels 8mm; 2 washers; 2 cover caps, chrome-plated; 1 Allen key
Prod. no.:
573410000
Geberit Pareo urinal cover
- Hinge : Brass chrome plated- Material : thermosetting plastic (Urochem)- Mounting : from the front, by means of rubber dowels- Combinable with: Pareo urinal, model no.: 236100
Prod. no.:
227780000
Geberit Renova top ceramic cistern
- Top-mounted ceramic cistern, 3/6l, dual flush- EN 997 - CL1 - 6 - VR II, EN 14055- Color : white(alpine)- Material : sanitary porcelain- With built-in dual flush push button faucet including push button and blind plug, chrome plated.- Dimensions: Width : 364 mm, Depth : 163 mm, Height : 355 mm.- Inlet : lateral- Can be combined with: Renova Nr.1 combination WC, model no.: 203820, 203821
Prod. no.:
502356001
Geberit icon handle 36,7cm
- high gloss chrome plated- aluminum- suitable for all iCon vanity units with handle- mounting with screw- 36,7cm
Variants from €10.35*
Prod. no.:
131034001
Geberit Monolith interface cable Dali
- for connection to Dali compatible control unit
Prod. no.:
521100000
Geberit Mounting wrench for toilet seat fixing
Mounting wrench for toilet seat fixing
Prod. no.:
461147001
Geberit GIS mounting plate for flush-mounted shut-off valves, 248mm
- For installation in Geberit GIS support systems for pre-walls, partition walls or free-standing walls- For mounting Geberit UP ball valves with fastener- For installation below Geberit GIS elements for washbasin- In the Geberit GIS support system infinitely height adjustable- Galvanized traverse- Traverse with two quick fasteners
Prod. no.:
116490001
Geberit Gateway
- Device settings and operation with mobile device via integrated Bluetooth® interface- Compatible with Geberit Control App- LAN interface for connection to a building automation system- WLAN interface for future internet-based applications- Bluetooth® interface for connection with Geberit Connect end devices and the Geberit Control app- USB port for firmware updates and diagnostics- LED status display- BACnet objects of all connected Geberit Connect end devices can be retrieved for integration into a building automation system- Power reserve of the real-time clock typically 72 hours- Maximum of 30 Geberit Connect end devices per Geberit gateway- Maximum cable length between Geberit Gateway and Geberit Connect end devices 100 m
Prod. no.:
461430001
Geberit GIS Washbasin set for free-standing fitting
- For installation in Geberit GIS support systems for pre-walls, partition walls or free-standing walls- For installation of washbasins- For stand fittings- Galvanized traverse- Traverse with two quick fasteners- Infinitely height adjustable in the Geberit GIS support system- Fixing distance washbasin 28 cm as standard, adjustable with Geberit GIS support structure- Fastening connection bend sound-insulated- Water connection MasterFix and MeplaFix compatible- Connection elbow can be mounted without tools- Sealing washer self-adhesive, fleece-coated- Protective plug for one-time pressure test with cold water up to max. 15 bar / 1500 kPa- Scope of delivery: 2 connection angles R 1/2"; 2 sound insulation pads; 2 insulation sleeves; 5 protective and marking plugs; 2 sealing washers; connection elbow made of PE-HD, ø 50 mm, extended; seal ø 44 / 32 mm; 2 fastening clips M10; 2 threaded rods M10; fastening material
Prod. no.:
111266001
Geberit Duofix element for washbasin, 112cm, narrow version, free-standing fitting
- For drywall construction- For installation in part-high or room-high pre-wall installations- For installation in room-high installation walls- For installation in part-height or room-height Geberit Duofix system walls- For installation of washbasins- For drywall construction- For installation in part-height or room-height pre-wall installations- For installation in room-high installation walls- For installation in part-height or room-height Geberit Duofix system walls- For installation of washbasins- For free-standing taps- For floor constructions 0-20 cm- Self-supporting frame powder-coated- Frame with drill holes ø 9 mm for fastening in wood stud construction- Footrests galvanized- Footrests adjustable 0-20 cm- Footrests with anti-slip- Footplates rotatable- Footplate depth suitable for installation in U-profiles UW 50 and UW 75 and Geberit Duofix system rails- mounting distance washbasin 5-32 cm- Fixing for connecting bend height-adjustable and sound-insulated- Traverse fitting height and depth adjustable- Scope of delivery: 2 connection brackets Rp 1/2" / R 1/2", MF-capable; 2 sound insulation pads; 2 insulation sleeves; connection bend made of PE-HD, ø 50 mm; seal ø 44 / 32 mm; 2 threaded rods M10; fixing material- 44mm wide
Prod. no.:
573900000
Geberit Corso urinal lid
- Color : white- Hinge : Brass chrome plated, removable- material : thermosetting plastic (Urochem)- Mounting : from the front, by means of rubber dowels- Combinable with: Corso urinal, model no.: 239200
Prod. no.:
154032001
Geberit Drain connection for Geberit shower surface Setaplano
- For installation inside buildings- For drainage of Geberit shower surfaces Setaplano- For installation of Geberit shower surfaces Setaplano without installation frame- Not suitable for installation in case of fire protection requirements- Easy cleaning- Scope of delivery: comb insert; prefabricated construction set for Geberit shower surface Setaplano with trap cover made of solid surface material; outlet pipe made of PE-HD, ø 50 mm- To be ordered additionally: Geberit shower surface Setaplano; odor trap
Prod. no.:
147041SI1
Geberit Wall-mounted control panel for Geberit AquaClean Sela
- Capacitive user interface- Glass surface- Connection via Bluetooth- Power supply by battery- Low battery warning- For manual, wireless control of shower toilet functions- For surface mounting- for Geberit AquaClean Sela- Glass / white
Prod. no.:
115623211
Geberit Sigma 70 cover frame
- For Geberit Sigma 70- for covering unclean tile edges- High-gloss chrome-plated
Prod. no.:
147020001
Geberit Water connection set for AquaClean
- 2 armored hoses 3/8"- connection material- For connecting Geberit AquaClean Tuma WC complete systems to Geberit concealed cisterns- for connecting Geberit AquaClean Sela to Geberit concealed cisterns- for connecting Geberit AquaClean Mera to Geberit concealed cisterns- for Geberit Omega UP cisterns 12cm, installation height 82/98cm- for Geberit Kappa concealed cistern 15cm- for Geberit concealed cistern with pre-mounted empty pipe for water connection- for water connection 5cm from the central axis
Prod. no.:
154336FW1
Geberit Finished kit for wall spout, stainless steel
- for Geberit wall drains- removable for cleaning- brushed stainless steel- Scope of delivery: cover, comb insert, Allen key
Prod. no.:
111747001
Geberit Drilling template for wall-mounted WC and Geberit AquaClean
- for marking the planking cut-outs for Geberit elements for wall-mounted WCs- for marking the connection positions of Geberit AquaClean shower toilets- powder-coated
Prod. no.:
111053001
Geberit Raw construction box for Geberit ONE mirror cabinet 110cm
- Suitable for Geberit ONE- With fastening hooks for mirror cabinet, adjustable- With fastening for electrical connection- With planking stops made of sheet metal, galvanized- Scope of delivery: building protection, coupling bush for mains connection, fixing material
Prod. no.:
154020001
Geberit Shower tray drain with 4 feet for Geberit shower surface Setaplano, 30mm
- For installation inside buildings- For drainage of Geberit shower surfaces Setaplano- For floor constructions up to upper edge of finished floor 9.5-11.5 cm- For fastening to Geberit installation frames for shower surfaces Setaplano- Deviating from requirements of EN 274, the sealing water height is only 30 mm- Odor trap cup can be dismantled- Easy cleaning- Drainage capacity 0.65 l/s- Blocking water height 50 mm- Scope of delivery: shower tray drain ø 90 mm; comb insert; prefabricated set for Geberit shower surface Setaplano with trap cover made of solid surface material; connection piece made of PE-HD; retaining ring, for Geberit installation frame; feet, for Geberit installation frame; fixing material- To be ordered additionally: Geberit shower surface Setaplano; installation frame for shower surface Setaplano
Prod. no.:
616042001
Geberit UP ball valve with mounting
- DN15- For drinking water cold and hot- For heating water- For cooling water without antifreeze- For cooling water with antifreeze- For treated water (application range according to Technical Information "Treated Water" )- For Geberit Duofix and Geberit GIS mounting plates- For solid and dry construction- Ball and base body completely flown through- Fixing points for hole circle ø 60 mm- Upper part with ball and seals interchangeable- With UP rotary actuation- Insulation made of EPP- Ball made of PPSU- Sealing of the upper part made of EPDM- Sealing of the ball made of silicone- Scope of delivery: UP rotary actuation; spindle extension; building protection can be shortened; building protection plug with marking tip
Prod. no.:
154030001
Geberit Shower tray drain with 4 feet for Geberit shower surface Setaplano
- For installation inside buildings- For drainage of Geberit shower surfaces Setaplano- For floor constructions up to upper edge of finished floor 6-9.5 cm- For fastening to Geberit installation frames for shower surfaces Setaplano- Not suitable for installation in case of fire protection requirements- Easy cleaning- Scope of delivery: comb insert; prefabricated set for Geberit shower surface Setaplano with siphon cover made of solid surface material; connection piece made of PE-HD 50mm; retaining ring, for Geberit installation frame; feet, for Geberit installation frame; fixing material- To be ordered additionally: Geberit shower surface Setaplano; installation frame for shower surface Setaplano; odor trap
Prod. no.:
115849001
Geberit Replacement set for Geberit urinal control electronic, battery operated
- For conversion of existing Geberit urinal flush controls with mains operation and cover plate 16 x 16 cm.- For conversion of existing Geberit urinal flush controls art. no. 115.804.xx.x, 115.826.00.1, 115.838.00.1, 115.818.xx.x- For automatic flush release of urinals- Not suitable for conversion of urinals with spray head- Infrared user detection with background suppression- Dynamic flush time adjustment- Ready for operation after mains connection- Power failure control- Functions can be set and queried with Geberit service cell phone- Flush triggering can be deactivated via Geberit Clean cell phone- Scope of delivery: Infrared control, solenoid valve, 2 Akali batteries type AA 1.5V; shut-off valve with throttle, hold-down clamp, seals, fixing material
Prod. no.:
461740001
Geberit GIS traverse for wall fitting AP fitting, 153mm, with two water connections
- For installation in Geberit GIS support systems for pre-walls, partition walls or free-standing walls- For connecting surface-mounted fittings with a spigot size of 15.3 cm- In the Geberit GIS support system infinitely height-adjustable- Galvanized traverse- Traverse with two quick fasteners- Sealing washer self-adhesive, fleece-coated- Protective plug for one-time pressure test with cold water up to max. 15 bar / 1500 kPa- Scope of delivery: 2 connection brackets Rp 1/2" / R 1/2", MF-capable; 2 sound insulation pads; 2 insulation sleeves; 2 protective and marking plugs; 2 sealing washers; fixing material
Prod. no.:
501030000
Geberit Socket with USB connection
- Color: Anthracite gray- Incl. mounting set- Power supply : 230 V, ~50 Hz- Dimensions: Width : 60 mm, Height : 75 mm, Depth : 58 mm- Combinable with: Vanity units
Prod. no.:
154022001
Geberit Shower tray drain for Geberit shower surface Setaplano, barrier water height 30mm
- For installation inside buildings- For drainage of Geberit shower surfaces Setaplano- For installation of Geberit shower surfaces Setaplano without installation frame- Deviating from requirements of EN 274, the sealing water height is only 30mm- Immersion pipe can be dismantled- Odor trap cup can be dismantled- Easy cleaning- Scope of delivery: comb insert; prefabricated set for Geberit shower surface Setaplano with siphon cover made of solid surface material; connection pipe made of PE-HD- To be ordered additionally: Geberit shower surface Setaplano
Prod. no.:
115848001
Geberit Replacement set for Geberit urinal control electronic, mains operation
- For conversion of existing Geberit urinal flush controls with mains operation and cover plate 16 x 16 cm.- For conversion of existing Geberit urinal flush controls art. no. 115.802.xx.x, 115.825.00.1, 115.837.00.1, 115.817.xx.x- For automatic flush release of urinals- Not suitable for conversion of urinals with spray head- Infrared user detection with background suppression- Dynamic flush time adjustment- Ready for operation after mains connection- Power failure control- Functions can be set and queried with Geberit service cell phone- Flush triggering can be deactivated via Geberit Clean cell phone- Scope of delivery: Infrared control, solenoid valve, power supply unit with adapter, shut-off valve with throttle, hold-down device, seals, fixing material
Prod. no.:
115768111
Geberit Cover plate Sigma
- for covering the service opening of Geberit Sigma concealed cisterns- Scope of delivery: mounting frame, 2 spacer bolts- plastic- color: white-alpin- 246 x 164mm- Note: not suitable for Geberit concealed cisterns until end of 2001, DuoFix Pur, KombiFix Pur, Kappa, Delta, Omega
Prod. no.:
116005001
Geberit Basic installation kit for urinals Preda and Selva, for Geberit urinal flushing control system
- For flush mounting in solid construction- For mounting Geberit urinal flush controls (from year of manufacture 2009)- For Geberit urinals Preda and Selva for flush-mounted urinal flush controls Water connection top centered- Empty pipe for flushing the line pre-mounted- With plastic nipple- Shut-off valve with throttle, pre-mounted- Electrical connection prepared- Construction protection for service opening protects against moisture and dirt- Construction protection for service opening can be cut to length without tools- Scope of delivery: Building protection with cover; water connection R 1/2" - flush-mounted housing; shut-off valve with throttle; empty pipe; connection clamp; flushing pipe made of PE-HD, ø 32 mm; connection angle 90° with internal thread G 1"; connection piece
Prod. no.:
150554211
Geberit Shower tray drain d90, PP, with drain cover, barrier water height 50mm
- For shower trays with valve hole ø 90 mm- For shower trays without overflow- Quality controlled according to EN 274-3- Immersion tube demountable- Odor trap cup removable- Scope of delivery: drain cover; odor trap; comb insert; fixing material
Prod. no.:
147086011
Geberit Large wall bracket for Geberit AquaClean remote control
- Large wall bracket, theft-proof, for Geberit AquaClean remote controls (from year of manufacture 2024)- Color / surface- Color: white- Wall bracket- Fixing material
Prod. no.:
501535000
Geberit LED light strip, 535mm
- Power supply : 230 V, ~50 Hz- Protection class : IP21- Protection class : 2- Illuminant : LED 4,5 Watt- Color temperature : 4000 K- Luminous flux : 504 lm- Energy class : A++
Variants from €42.44*