Dallmer CeraDrain
Dallmer CeraDrain are bath drains with maximum safety and minimum installation height.
Prod. no.:
518385
Dallmer CeraDrain sound insulation drain
- Sound insulation drain CeraDrain Pure, DN 50, 100 x 100 mm- Floor drain to DIN EN 1253 including DallDrain sound insulation mat, DallDrain Pure top section with stainless steel grating in plastic frame. When installed in accordance with the test report, suitable for meeting the sound insulation requirements in accordance with DIN 4109. Drain body made of polypropylene with an installation height of 85 mm, four sound-decoupled, freely positionable mounting feet for fixing and height adjustment 85-250 mm, all-round polymer concrete collar with cast-in structural steel mat for force-locking embedding in the screed, structural protection cover and completely removable, two-part odour and cleaning trap with 50 mm sealing water height. With click-in, 110 mm wide, flexible, alkali-resistant, non-capillary sealing sleeve with d: 370 mm for secure connection to bonded waterproofing in accordance with DIN 18534. Drain connection made of polypropylene, DN 50 at the side, adjustable 0-15 degrees with ball joint for stress-free connection of the waste water pipe. Drainage capacity in accordance with DIN EN 1253: 0.92 l/s. Extension Shortenable for floor coverings 10 - 36 mm (incl. adhesive), laterally adjustable +/- 2.5 mm with positioning aid. Top extension and frame made of ABS, 100 x 100 mm, grate made of stainless steel 1.4301, load class K 3 (300 kg).
Prod. no.:
513069
Dallmer CeraDrain S 10 extension unit
- Suitable for drain bodies 40, 42 and 46 as well as balcony drain bodies 83 and 84- Polymer concrete collar with cast-in structural steel mat- Adjusting screws for height adjustment- ABS extension- Laterally adjustable frame holder- Glass fabric mat- Back pressure seal- spacer ring- Protective cover
Prod. no.:
563002
Dallmer CeraDrain S 15 extension unit
- Suitable for drain bodies 54/55, 57/58, 61 and 61/1- Polymer concrete collar with cast-in structural steel mat- Adjusting screws for height adjustment- ABS extension- Laterally adjustable frame holder- Glass fabric mat- Back pressure seal- spacer ring- Protective cover
Prod. no.:
518408
Dallmer CeraDrain sound insulation drain
- Sound insulation drain CeraDrain Select Plan, DN 40, 100 x 100 mm-- Floor drain including DallDrain sound insulation mat, DallDrain Select attachment with stainless steel grating in stainless steel frame. When installed in accordance with the test report, suitable for meeting the sound insulation requirements of DIN 4109. Drain body made of polypropylene with installation height 55 mm, four sound-decoupled, freely positionable mounting feet for fixing and height adjustment 55-250 mm, all-round polymer concrete collar with cast-in structural steel mat for force-locking embedding in the screed, structural protection cover and completely removable, mechanically acting odour and cleaning trap. With click-in, 110 mm wide, flexible, alkali-resistant, non-capillary sealing sleeve with d: 370 mm for secure connection to bonded waterproofing in accordance with DIN 18534. Drain connection made of polypropylene, DN 40 on the side, adjustable 0-15 degrees with ball joint for stress-free connection of the waste water pipe. Drainage capacity in accordance with DIN EN 1253: 0.7 l/s. Extension Shortenable for floor coverings 10 - 36 mm (incl. adhesive), laterally adjustable +/- 2.5 mm with positioning aid. Top extension made of ABS, 100 x 100 mm, grate and frame made of stainless steel 1.4301, load class K 3 (300 kg).
Prod. no.:
518439
Dallmer CeraDrain Plan drain body,
- CeraDrain Plan drain body, DN 40-- Drain body with 55 mm installation height for installation with DallDrain supports, DallDrain extension unit. Drain body made of polypropylene with four sound-decoupled, freely positionable mounting feet for fixing and height adjustment 55-250 mm, all-round polymer concrete collar with cast-in structural steel mat for force-locking embedding in the screed, structural protection cover and completely removable, mechanically acting odor and cleaning trap. With click-in, 110 mm wide, flexible, alkali-resistant, non-capillary sealing sleeve with d: 370 mm for secure connection to bonded waterproofing in accordance with DIN 18534. Drain connection made of polypropylene, DN 40 on the side, adjustable 0-15 degrees with ball joint for stress-free connection of the waste water pipe. Drainage capacity based on DIN EN 1253: 0.7 l/s.
Prod. no.:
494009
Dallmer CeraDrain Plan bath connection, 494009
- Connection piece with rubber sleeve seal and flexible lip seals made of TPE for the secure connection of bathtubs to the CeraDrain Plan VC 12 and CeraDrain Plan K 12 floor drains
Prod. no.:
518422
Dallmer CeraDrain drain body, DN 50
- CeraDrain drain body, DN 50- Drain body to DIN EN 1253 with 85 mm installation height for installation with DallDrain supports, DallDrain extension unit. Drain body made of polypropylene with four sound-decoupled, freely positionable mounting feet for fixing and height adjustment 85-250 mm, all-round polymer concrete collar with cast-in structural steel mat for force-locking embedding in the screed, structural protection cover and completely removable, two-part odor and cleaning trap with 50 mm sealing water height. With click-in, 110 mm wide, flexible, alkali-resistant, non-capillary sealing sleeve with d: 370 mm for secure connection to bonded waterproofing in accordance with DIN 18534. Drain connection made of polypropylene, DN 50 at the side, adjustable 0-15 degrees with ball joint for stress-free connection of the waste water pipe. Drainage capacity in accordance with DIN EN 1253: 0.92 l/s.
Prod. no.:
495075
Dallmer Backwater seal CeraDrain S 10
Backwater seal CeraDrain S 10
Prod. no.:
693006
Dallmer CeraDrain S 15 backflow seal
- Spare part for CeraDrain and TistoDrain S 15 extension units
Prod. no.:
518446
Dallmer CeraDrain sound insulation drain
- Sound insulation drain CeraDrain Pure Plan, DN 40, 100 x 100 mm-- Floor drain including DallDrain sound insulation mat, DallDrain Pure attachment with stainless steel grating in plastic frame. When installed in accordance with the test report, suitable for meeting the sound insulation requirements of DIN 4109. Drain body made of polypropylene with installation height 55 mm, four sound-decoupled, freely positionable mounting feet for fixing and height adjustment 55-250 mm, all-round polymer concrete collar with cast-in structural steel mat for force-locking embedding in the screed, structural protection cover and completely removable, mechanically acting odour and cleaning trap. With click-in, 110 mm wide, flexible, alkali-resistant, non-capillary sealing sleeve with d: 370 mm for secure connection to bonded waterproofing in accordance with DIN 18534. Drain connection made of polypropylene, DN 40 on the side, adjustable 0-15 degrees with ball joint for stress-free connection of the waste water pipe. Drainage capacity in accordance with DIN EN 1253: 0.7 l/s. Extension Shortenable for floor coverings 10 - 36 mm (incl. adhesive), laterally adjustable +/- 2.5 mm with positioning aid. Top extension and frame ABS, 100 x 100 mm, grate made of stainless steel 1.4301, load class K 3 (300 kg).
Prod. no.:
518392
Dallmer CeraDrain sound insulation drain
- Sound insulation drain CeraDrain Select, DN 50 , 100 x 100 mm
Prod. no.:
693099
Dallmer CeraDrain/TistoDrain S 15 frame support
- Spare part for CeraDrain S 15 and TistoDrain S 15 extension units. For height and side-adjustable positioning of extension frames and attachments
Prod. no.:
513403
Dallmer Floor drain CeraDrain 48 K 12, DN 50 120 x 120mm
- according to DIN EN 1253- For safe mounting of composite waterproofing according to ZDB data sheet 1/2010- Housing made of polypropylene, withremovable odor trap, polymer concrete collar with fixed reinforcement (construction steel mat450 x 450 mm), glass fabric mat to reinforce the sealing layer- Building protection cover- Height regulation and horizontal alignment by 4 threaded rods with rubber feet for sound decoupling- Frame: ABS, 120 x 120 mm- Grate: stainless steel 1.4301, class K 3.- Drain socket: DN 50 lateral, with ball joint adjustable from 0 - 15°.- Drainage capacity: 0.85 l/s- Overall height 105 mm