Triola hot water bathroom radiator 1184 x 500mm
Height dimension (in mm):
1184
|
Surface:
anthracite gray
|
Width dimension (in mm):
500
€811.44*
% €1,198.81* (32.31% saved)Available in 15 days, delivery time 1-2 Tag(e)
Product number:
BTR118050AT2UG
EAN:
4045862851007
Manufacturer:
BEMM
Triola hot water bathroom radiator 1184 x 500mm
- BEMM Triola, top bathroom radiator series BTR, for central heating (additional equipment with electric heating element) and for heating towels and textiles
- Straight horizontal oval panel tubes 70 x 11 mm connected to the vertical square tubes 40 x 40 mm in an energy-saving, water-bearing manner using a special welding process
- Horizontal tubes arranged regularly throughout for hanging towels and textiles from the side
- Bathroom radiator can be turned upside down (either connections on the left and horizontal pipes to the right or connections on the right and horizontal pipes to the left)
- Vertical pipes positioned 50 mm apart for flow and return
- With DN 15 (1/2) x 50 mm connections on one side at the top and bottom
- Environmentally friendly, emission-free DIN 55900 powder-coated surface and baked at approx. 180 degrees C
- AT anthracite grey, optionally in a different color according to the BEMM color palette
- Standard accessories: 2 vent plugs DN 15 (1/2) and 4 stable, easy-to-install fastenings made of steel comply with AK3 in accordance with VDI 6036, with hexagonal wood screws and dowels
- Complies with the guidelines of the statutory accident insurers (GUV), thermal performance in accordance with DIN EN 442-2
- CE declaration of performance in accordance with EU-BauPVo
- Heating medium Water Maximum permissible operating temperature 100°C Maximum permissible operating pressure 4 bar
- Straight horizontal oval panel tubes 70 x 11 mm connected to the vertical square tubes 40 x 40 mm in an energy-saving, water-bearing manner using a special welding process
- Horizontal tubes arranged regularly throughout for hanging towels and textiles from the side
- Bathroom radiator can be turned upside down (either connections on the left and horizontal pipes to the right or connections on the right and horizontal pipes to the left)
- Vertical pipes positioned 50 mm apart for flow and return
- With DN 15 (1/2) x 50 mm connections on one side at the top and bottom
- Environmentally friendly, emission-free DIN 55900 powder-coated surface and baked at approx. 180 degrees C
- AT anthracite grey, optionally in a different color according to the BEMM color palette
- Standard accessories: 2 vent plugs DN 15 (1/2) and 4 stable, easy-to-install fastenings made of steel comply with AK3 in accordance with VDI 6036, with hexagonal wood screws and dowels
- Complies with the guidelines of the statutory accident insurers (GUV), thermal performance in accordance with DIN EN 442-2
- CE declaration of performance in accordance with EU-BauPVo
- Heating medium Water Maximum permissible operating temperature 100°C Maximum permissible operating pressure 4 bar
Personal expert advice
Fast & smooth delivery
Fair online prices with buyer protection
Many different payment methods
Free order check
Zubehör
Prod. no.:
ZMUVDCR5
M-valve Softline straight through with thermostat Puro
- M-valve Softline DN15 x 50 mm with presetting, for filling, shutting off and draining, for use in 2-pipe systems up to 10 bar operating pressure, with any flow direction, nickel-plated, with thermostat connection thread M30 x 1.5 with protective cap, with 2 special screw-in connectors with O-ring DN 15 (1/2) and male DN 20 (3/4) Eurocone for pipe connection using compression fitting- Thermostatic head generally on the left, flow direction may be determined by radiator requirements- Complete with elegant Softline cladding made of impact-resistant plastic in the color chrome or in the color of the radiator- Valve and cover packed in 1 box- Including Puro thermostat, elegant, slimline designer radiator controller, with built-in fluid element, with chrome-plated handle sleeve- In unfavorable lighting conditions or for the visually impaired, the basic setting 3 can be easily found again using the tactile setting aids- For valve connection M30 x 1.5- Minimum position: Zero position
Variants from €88.60*
Prod. no.:
ZENELM06CR
Electric immersion heater series N with medium temperature controller
- Electric heating element N series with medium temperature controller, heating element consisting of electric heating element with NTC thermal fuse and stainless steel immersion body with DN 15 (1/2) connection thread with O-ring- Heating rod and NTC temperature sensor (medium temperature) connected to medium temperature controller, mains voltage 230 V / 50 Hz, IP44, class I, connection cable approx. 0.8 m with safety plug, setting range 20 degrees C to 65 degrees C (surface temperature approx. 18-50 degrees C), timer for 3 different boost functions (maximum heating power to 65 degrees C from the set target temperature, standby mode (i.e. without heating function), indicator lamp, chrome-plated plastic housing, grey cable- Dimensions 115x70x38 mm (WxHxD)- For towel warmers for use with underfloor heating or other central heating radiators for room temperature control
Variants from €194.24*
Prod. no.:
ZMUVECR5
M-valve Softline angle shape, with thermostat Puro
- M-valve Softline DN15 x 50 mm with presetting, for filling, shutting off and draining, for use in 2-pipe systems up to 10 bar operating pressure, with any flow direction, nickel-plated, with thermostat connection thread M30 x 1.5 with protective cap, with 2 special screw-in connectors with O-ring DN 15 (1/2) and male DN 20 (3/4) Eurocone for pipe connection using compression fitting- Thermostatic head generally on the left, flow direction may be determined by radiator requirements- Complete with elegant Softline cladding made of impact-resistant plastic in the color chrome or in the color of the radiator- Valve and cover packed in 1 box- Including Puro thermostat, elegant, slimline designer radiator controller, with built-in fluid element, with chrome-plated handle sleeve- In unfavorable lighting conditions or for the visually impaired, the basic setting 3 can be easily found again using the tactile setting aids- For valve connection M30 x 1.5- Minimum position: Zero position
Variants from €88.60*
Prod. no.:
ZEPELB06CR
P series electric immersion heater with Bluetooth room control Stone
- P series electric immersion heater with Stone Bluetooth controller, consisting of electric immersion heater with PTC element, heating element with DN 15 (1/2) connection thread with O-ring and plug connection- With Stone Bluetooth controller, mains voltage 230 V / 50 Hz, IP44, class I, for fixed connection, with sliding rosette for concealed electrical connection from behind the wall, controller with on/off switch and digital display, can be controlled directly on the controller or using an app via Bluetooth connection from a smartphone or tablet- Room temperature or power control selectable, individually programmable, with weekly program, frost protection function, power consumption display and boost function, room temperature setting range 15-30 °C, power/consumption control (kW/kWh in 10 steps from 10-100 %)- Chrome-plated plastic housing (black front), dimensions 76x76x99-120 mm (WxHxD)- App available via Play Store (Android) or iTunes (IOS) under Stone Connect BLE- Control complies with the Ecodesign Directive for individual room heaters
Variants from €334.52*
Prod. no.:
ZEPELD06CR
Electric immersion heater Series P with room control Trend D
- Electric immersion heater series P with room control Trend D, consisting of electric immersion heater with PTC element, heating element with stainless steel immersion body with DN 15 (1/2) connection thread with O-ring, with mounted clock room thermostat with approx. 1.2 m connection cable and plug, mains voltage 230 V / 50 Hz, class II, IP44- Clock room thermostat, digital with integrated infrared sensor for optionally available IR remote control, with 2 preset programs with daily repetition and 1 individually programmable weekly program, timer for 2 hours, vacation function, frost protection function, button lock, open window function, setting range 10 - 32 degrees C, white housing, dimensions 137x76x42 mm (WxHxD)- Control complies with the Ecodesign Directive for single-room heating appliances
Variants from €203.31*
Prod. no.:
ZEPELK06SW
Electric immersion heater P series with radio room control comfort
- Electric heating element P series with radio room control comfort, consisting of electric heating element with PTC element, IP55, class I, with approx. 1.0 m connection cable u- Radio receiver, for mounting and connection to flush-mounted box, class II, 230 VAC, maximum switching capacity 16 A, IP30, white housing dimensions 87x87x20mm (WxHxD), as well as radio room thermostat, digital with weekly program with 9 preset programs, individually programmable, holiday function, frost protection and party function- individually programmable, vacation and party function, frost protection function, button lock, setting range 5 - 35 degrees C- IP30, incl- 2 batteries type AAA LR03 1.5 V, white plastic housing and cable, dimensions 83x80x27 mm (WxHxD)- Control complies with the Ecodesign Directive for individual room heaters
Variants from €326.97*
Prod. no.:
ZEPELS06
Electric heating element P series with plug
- P series electric immersion heater with plug, heating element with PTC element, protection class IP55, class I, mains voltage 230 V, stainless steel immersion body with DN 15 (1/2) connection thread, O-ring and hexagon with approx. 1.0 m connection cable with stranded wire- For use as an individual room heater, add the required control unit (following pages) or on site (Smarthome)
Variants from €126.26*
Prod. no.:
ZVXMEP15ECR5
MEP valve (bivalent) DN 15 x 50 in angle design
- MEP valve (bivalent), DN 15 x 50 mm in angle design, with presetting, can be shut off, for use in 2-pipe systems up to 10 bar operating pressure and 110 °C operating temperature- Valve insert and insert for return shut-off can be exchanged, allowing the valve (flow) to be installed on the left or right as required- Thermostat connection thread M30x1.5 with protective cap- Solid chrome-plated valve design- For connecting copper, mild steel and plastic pipes, use on-site compression fittings for Eurocone with DN 20 (3/4) male thread
Variants from €115.30*
Prod. no.:
ZVXTOCR
Thermostat Puro
- Elegant, slim design- with built-in liquid element- in unfavorable lighting conditions or for the visually impaired, the basic setting "3" can be easily found again using the tactile adjustment aids- for connection M30 x 1.5- chrome/chrome
Variants from €25.04*