MIDO ARC hot water bathroom radiator
Height dimension (in mm):
818
|
Surface:
anthracite gray
|
Width dimension (in mm):
497
€332.71*
% €757.24* (56.06% saved)Available in 15 days, delivery time 1-2 Tag(e)
Product number:
BMA081050AT5M
EAN:
4045862596212
Manufacturer:
BEMM
MIDO ARC hot water bathroom radiator
- Bemm Mido Arc, bathroom radiator series BMA for central heating (additional equipment with electric heating element) and for heating towels and textiles
- Horizontal round tubes 23 mm diameter
- connected to vertical all-round smooth semi-oval tubes 30 x 40 mm in a special process without visible weld seams
- The round tubes are bent so that the radiator curves forwards in an arc
- With openings for towels
- With M connection DN 15 (1/2) x 50 mm centered at the bottom and 2 connections DN 15 (1/2) from the bottom, right and left outside, as well as 1 vent connection DN 15 (1/2) from the top right
- Environmentally friendly, emission-free powder-coated surface DIN 55900 and baked at approx. 180 degrees C
- anthracite grey, other colours on request according to the BEMM colour range, optionally galvanized under the powder coating
- Standard accessories: vent plug DN 15 (1/2) in nickel-plated design with special seal, 4 easy-to-install, depth-adjustable fastenings that can be fixed from the front (AK 3-4 according to VDI 6036 depending on size), including 4 hexagonal wood screws with dowels
- Complies with the guidelines of the statutory accident insurers (GUV), thermal performance in accordance with DIN EN 442-2, measured by a recognized testing institute
- CE declaration of performance in accordance with EU-BauPVo Heating medium water Maximum permissible operating temperature 100°C Maximum permissible operating overpressure 10 bar
- 818 x 497mm
- If a heating rod is used, Bemm recommends a maximum output of 400 watts
- Horizontal round tubes 23 mm diameter
- connected to vertical all-round smooth semi-oval tubes 30 x 40 mm in a special process without visible weld seams
- The round tubes are bent so that the radiator curves forwards in an arc
- With openings for towels
- With M connection DN 15 (1/2) x 50 mm centered at the bottom and 2 connections DN 15 (1/2) from the bottom, right and left outside, as well as 1 vent connection DN 15 (1/2) from the top right
- Environmentally friendly, emission-free powder-coated surface DIN 55900 and baked at approx. 180 degrees C
- anthracite grey, other colours on request according to the BEMM colour range, optionally galvanized under the powder coating
- Standard accessories: vent plug DN 15 (1/2) in nickel-plated design with special seal, 4 easy-to-install, depth-adjustable fastenings that can be fixed from the front (AK 3-4 according to VDI 6036 depending on size), including 4 hexagonal wood screws with dowels
- Complies with the guidelines of the statutory accident insurers (GUV), thermal performance in accordance with DIN EN 442-2, measured by a recognized testing institute
- CE declaration of performance in accordance with EU-BauPVo Heating medium water Maximum permissible operating temperature 100°C Maximum permissible operating overpressure 10 bar
- 818 x 497mm
- If a heating rod is used, Bemm recommends a maximum output of 400 watts
Personal expert advice
Fast & smooth delivery
Fair online prices with buyer protection
Many different payment methods
Free order check
Zubehör
Prod. no.:
ZMUVDCR5
M-valve Softline straight through with thermostat Puro
- M-valve Softline DN15 x 50 mm with presetting, for filling, shutting off and draining, for use in 2-pipe systems up to 10 bar operating pressure, with any flow direction, nickel-plated, with thermostat connection thread M30 x 1.5 with protective cap, with 2 special screw-in connectors with O-ring DN 15 (1/2) and male DN 20 (3/4) Eurocone for pipe connection using compression fitting- Thermostatic head generally on the left, flow direction may be determined by radiator requirements- Complete with elegant Softline cladding made of impact-resistant plastic in the color chrome or in the color of the radiator- Valve and cover packed in 1 box- Including Puro thermostat, elegant, slimline designer radiator controller, with built-in fluid element, with chrome-plated handle sleeve- In unfavorable lighting conditions or for the visually impaired, the basic setting 3 can be easily found again using the tactile setting aids- For valve connection M30 x 1.5- Minimum position: Zero position
Variants from €88.60*
Prod. no.:
ZENELM04CR
Electric immersion heater series N with medium temperature controller
- Electric heating element N series with medium temperature controller, heating element consisting of electric heating element with NTC thermal fuse and stainless steel immersion body with DN 15 (1/2) connection thread with O-ring- Heating rod and NTC temperature sensor (medium temperature) connected to medium temperature controller, mains voltage 230 V / 50 Hz, IP44, class I, connection cable approx. 0.8 m with safety plug, setting range 20 degrees C to 65 degrees C (surface temperature approx. 18-50 degrees C), timer for 3 different boost functions (maximum heating power to 65 degrees C from the set target temperature, standby mode (i.e. without heating function), indicator lamp, chrome-plated plastic housing, grey cable- Dimensions 115x70x38 mm (WxHxD)- For towel warmers for use with underfloor heating or other central heating radiators for room temperature control
Variants from €194.24*
Prod. no.:
ZMXVDCR5
M-valve Softline straight through, without thermostat
M-valve Softline DN 15 x 50 mm with M-casing, with pre-setting, for filling, shutting off and draining, connection thread M30x1.5 with construction protection compression fitting-- In corner or straight-through design- Complete with elegant M cladding made of impact-resistant plastic in the color BEMM white or- in the color of the radiator or- chrome-plated, including spacer, Allen screw and logo cover- Valve and cover packed in 1 box-
Variants from €71.91*
Prod. no.:
ZEPELB04CR
P series electric immersion heater with Bluetooth room control Stone
- P series electric immersion heater with Stone Bluetooth controller, consisting of electric immersion heater with PTC element, heating element with DN 15 (1/2) connection thread with O-ring and plug connection- With Stone Bluetooth controller, mains voltage 230 V / 50 Hz, IP44, class I, for fixed connection, with sliding rosette for concealed electrical connection from behind the wall, controller with on/off switch and digital display, can be controlled directly on the controller or using an app via Bluetooth connection from a smartphone or tablet- Room temperature or power control selectable, individually programmable, with weekly program, frost protection function, power consumption display and boost function, room temperature setting range 15-30 °C, power/consumption control (kW/kWh in 10 steps from 10-100 %)- Chrome-plated plastic housing (black front), dimensions 76x76x99-120 mm (WxHxD)- App available via Play Store (Android) or iTunes (IOS) under Stone Connect BLE- Control complies with the Ecodesign Directive for individual room heaters
Variants from €334.52*
Prod. no.:
ZMXVECR5
M-valve Softline angle shape, without thermostat
M-valve Softline DN 15 x 50 mm with M-casing, with pre-setting, for filling, shutting off and draining, connection thread M30x1.5 with construction protection compression fitting-- In corner or straight-through design- Complete with elegant M cladding made of impact-resistant plastic in the color BEMM white or- in the color of the radiator or- chrome-plated, including spacer, Allen screw and logo cover- Valve and cover packed in 1 box-
Variants from €71.91*
Prod. no.:
ZEPELD04CR
Electric immersion heater Series P with room control Trend D
- Electric immersion heater series P with room control Trend D, consisting of electric immersion heater with PTC element, heating element with stainless steel immersion body with DN 15 (1/2) connection thread with O-ring, with mounted clock room thermostat with approx. 1.2 m connection cable and plug, mains voltage 230 V / 50 Hz, class II, IP44- Clock room thermostat, digital with integrated infrared sensor for optionally available IR remote control, with 2 preset programs with daily repetition and 1 individually programmable weekly program, timer for 2 hours, vacation function, frost protection function, button lock, open window function, setting range 10 - 32 degrees C, white housing, dimensions 137x76x42 mm (WxHxD)- Control complies with the Ecodesign Directive for single-room heating appliances
Variants from €203.31*
Prod. no.:
ZEPELK04SW
Electric immersion heater P series with radio room control comfort
- Electric heating element P series with radio room control comfort, consisting of electric heating element with PTC element, IP55, class I, with approx. 1.0 m connection cable u- Radio receiver, for mounting and connection to flush-mounted box, class II, 230 VAC, maximum switching capacity 16 A, IP30, white housing dimensions 87x87x20mm (WxHxD), as well as radio room thermostat, digital with weekly program with 9 preset programs, individually programmable, holiday function, frost protection and party function- individually programmable, vacation and party function, frost protection function, button lock, setting range 5 - 35 degrees C- IP30, incl- 2 batteries type AAA LR03 1.5 V, white plastic housing and cable, dimensions 83x80x27 mm (WxHxD)- Control complies with the Ecodesign Directive for individual room heaters
Prod. no.:
ZEPELS04
Electric heating element P series with plug
- P series electric immersion heater with plug, heating element with PTC element, protection class IP55, class I, mains voltage 230 V, stainless steel immersion body with DN 15 (1/2) connection thread, O-ring and hexagon with approx. 1.0 m connection cable with stranded wire- For use as an individual room heater, add the required control unit (following pages) or on site (Smarthome)